1
|
Wu S, Su Y, Zhang L, Gu X, Feng T, Xiao J, Yao XS. Local-field engineering in slot waveguide for fabricating on-chip Bragg grating filters with high reflectivity across a flat broadband. Opt Express 2024; 32:4684-4697. [PMID: 38297663 DOI: 10.1364/oe.515662] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/12/2023] [Accepted: 01/16/2024] [Indexed: 02/02/2024]
Abstract
On-chip Bragg gratings with high reflectivities have been found to have widespread applications in filters, resonators, and semiconductor lasers. However, achieving strong Bragg reflections with flat response across a broad bandwidth on the popular 220 nm silicon-on-insulator (SOI) platform still remains a challenge. In this paper, such a high performance device is proposed and fabricated, which is based on a slot waveguide with gratings etched on the inner sidewalls of the slot. By manipulating the local field in the slot region using a chirped and tapered grating-based mode transition, the device achieves a flat response with ultra-high reflection and low transmission for the TE mode across a broad operating bandwidth. Leveraging the ultra-high birefringence of the SOI waveguide, the device functions both as a TE slot waveguide reflector and a TM pass polarizer. Simulation results demonstrate that the device exhibits an ultra-high rejection of more than 50 dB and a reflectivity exceeding 0.99 for the TE mode across a 91 nm wavelength range, while maintaining a high transmittance of larger than 0.98 for the TM mode. Experimental results validate that the device performance is consistent with the simulation results. A fabricated device based on such a gratings exhibits a low insertion loss (<0.8 dB) and high polarization extinction ratio (>30 dB) over 100 nm bandwidth (1484 nm-1584 nm), demonstrating that the performance of the present design is competitive with that of the state-of-the-art SOI Bragg gratings.
Collapse
|
2
|
Gill WA, Aziz MT, Darwish HW, Janjua MRSA. Exploring HCl-HCl interactions: QZVPP calculations, improved Lennard-Jones potential, and second virial coefficient analysis for thermodynamics and industrial applications. RSC Adv 2024; 14:1890-1901. [PMID: 38192328 PMCID: PMC10772863 DOI: 10.1039/d3ra04387h] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/30/2023] [Accepted: 12/13/2023] [Indexed: 01/10/2024] Open
Abstract
In this paper, we present a comprehensive analysis of HCl-HCl interactions, including QZVPP calculations, energy fitting, conformation validation, and the determination of the second virial coefficient B using improved Lennard-Jones (ILJ) potential parameters. To acquire accurate interaction energies, initial QZVPP calculations are performed on approximately 1851 randomly generated HCl-HCl conformations. Then, these energies are used to fit an improved Lennard-Jones potential energy surface, allowing for a robust description of HCl-HCl interactions. The ILJ potential parameters are then used to validate particular HCl dimer conformations, ensuring their stability and consistency with experimental observations. The correlation between calculated and experimental conformations strengthens the validity of the ILJ potential parameters. In addition, the second viral coefficient B is calculated at various temperatures using the ILJ potential. The obtained B values are compared to experimental data, demonstrating close agreement, and validating the ILJ potential's ability to accurately capture the intermolecular interactions and gas-phase behavior of the HCl-HCl system. The results of this study demonstrate the effective implementation of QZVPP calculations, energy fitting, and ILJ potential parameters in validating HCl-HCl conformations and accurately determining the second virial coefficient B. The high degree of concordance between calculated B values and experimental data demonstrates the validity of the ILJ potential and its suitability for modeling HCl-HCl interactions. This research contributes to a greater comprehension of HCl-HCl interactions and their implications for numerous chemical and atmospheric processes. The validated conformations, energy fitting method, and calculated second virial coefficients provide valuable instruments for future research and pave the way for more accurate modeling and simulations of HCl-HCl systems.
Collapse
Affiliation(s)
- Waqas Amber Gill
- Departamento de Química Física, Universidad de Valencia Avda Dr Moliner, 50, Burjassot E-46100 Valencia Spain
| | - Muhammad Tariq Aziz
- Department of Chemistry, Government College University Faisalabad Faisalabad 38000 Pakistan
| | - Hany W Darwish
- Department of Pharmaceutical Chemistry, College of Pharmacy, King Saud University P.O. Box 2457 Riyadh 11451 Saudi Arabia
| | | |
Collapse
|
3
|
Mao M, Ji X, Wang Q, Lin Z, Li M, Liu T, Wang C, Hu YS, Li H, Huang X, Chen L, Suo L. Anion-enrichment interface enables high-voltage anode-free lithium metal batteries. Nat Commun 2023; 14:1082. [PMID: 36841872 DOI: 10.1038/s41467-023-36853-x] [Citation(s) in RCA: 29] [Impact Index Per Article: 29.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/17/2022] [Accepted: 02/20/2023] [Indexed: 02/27/2023] Open
Abstract
Aggressive chemistry involving Li metal anode (LMA) and high-voltage LiNi0.8Mn0.1Co0.1O2 (NCM811) cathode is deemed as a pragmatic approach to pursue the desperate 400 Wh kg-1. Yet, their implementation is plagued by low Coulombic efficiency and inferior cycling stability. Herein, we propose an optimally fluorinated linear carboxylic ester (ethyl 3,3,3-trifluoropropanoate, FEP) paired with weakly solvating fluoroethylene carbonate and dissociated lithium salts (LiBF4 and LiDFOB) to prepare a weakly solvating and dissociated electrolyte. An anion-enrichment interface prompts more anions' decomposition in the inner Helmholtz plane and higher reduction potential of anions. Consequently, the anion-derived interface chemistry contributes to the compact and columnar-structure Li deposits with a high CE of 98.7% and stable cycling of 4.6 V NCM811 and LiCoO2 cathode. Accordingly, industrial anode-free pouch cells under harsh testing conditions deliver a high energy of 442.5 Wh kg-1 with 80% capacity retention after 100 cycles.
Collapse
|
4
|
Dabrowska A, Lindner S, Schwaighofer A, Lendl B. Mid-IR dispersion spectroscopy - A new avenue for liquid phase analysis. Spectrochim Acta A Mol Biomol Spectrosc 2023; 286:122014. [PMID: 36323085 DOI: 10.1016/j.saa.2022.122014] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/22/2022] [Revised: 10/14/2022] [Accepted: 10/16/2022] [Indexed: 06/16/2023]
Abstract
Mid-IR dispersion spectroscopy is an attractive, novel approach to liquid phase analysis that extends the possibilities of traditional methods based on the detection of absorption via intensity attenuation. This technique detects inherent refractive index changes (phase shifts) induced by IR light interaction with absorbing matter. In contrast to classic absorption spectroscopy, it provides extended dynamic range, baseline-free detection, constant sensitivity, and inherent immunity to power fluctuation. In this paper, we provide a detailed experimental and theoretical characterization and verification of this method with special focus on broadband liquid sample analysis. For this purpose, we develop a compact benchtop dispersion spectroscopy setup based on an EC-QCL coupled to a Mach-Zehnder interferometer. Phase-locked interferometric detection enables to fully harness the advantages of the technique. By instrument operation in the quadrature point combined with balanced detection, the full immunity towards laser power fluctuations and the environmental noise can be achieved. On the example of ethanol (0.5-50% v/v) dissolved in water, it is experimentally demonstrated that changes of the refractive index function are linearly related to concentration also for strongly absorbing, highly concentrated samples beyond the validity of the Beer-Lambert law. Characterization of the sensitivity and noise behavior indicates that the optimum applicable pathlength for liquid analysis can be extended beyond the ones for absorption spectroscopy. Experimental demonstration of the advantages over classical absorption spectroscopy illuminates the potential of dispersion spectroscopy as upcoming robust and sensitive way of recording IR spectra of liquid samples.
Collapse
Affiliation(s)
- Alicja Dabrowska
- Research Division of Environmental Analytics, Process Analytics and Sensors, Institute of Chemical Technologies and Analytics, Technische Universität Wien, Getreidemarkt 9/164-UPA, 1060 Vienna, Austria
| | - Stefan Lindner
- Research Division of Environmental Analytics, Process Analytics and Sensors, Institute of Chemical Technologies and Analytics, Technische Universität Wien, Getreidemarkt 9/164-UPA, 1060 Vienna, Austria
| | - Andreas Schwaighofer
- Research Division of Environmental Analytics, Process Analytics and Sensors, Institute of Chemical Technologies and Analytics, Technische Universität Wien, Getreidemarkt 9/164-UPA, 1060 Vienna, Austria.
| | - Bernhard Lendl
- Research Division of Environmental Analytics, Process Analytics and Sensors, Institute of Chemical Technologies and Analytics, Technische Universität Wien, Getreidemarkt 9/164-UPA, 1060 Vienna, Austria.
| |
Collapse
|
5
|
Debevc A, Topič M, Krč J. High extinction ratio and an ultra-broadband polarization beam splitter in silicon integrated photonics by employing an all-dielectric metamaterial cladding. Opt Express 2022; 30:46693-46709. [PMID: 36558615 DOI: 10.1364/oe.476333] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/22/2022] [Accepted: 11/02/2022] [Indexed: 06/17/2023]
Abstract
In silicon and other photonic integrated circuit platforms many devices exhibit a large polarization dependency, therefore a polarization beam splitter (PBS) is an essential building block to split optical signal to transversal electric (TE) and transversal magnetic (TM) modes. In this paper we propose a concept of integrated silicon-based PBS exploiting unique properties of all dielectric metamaterial cladding to achieve a high extinction ratio (ER) and wide bandwidth (BW) polarization splitting characteristics. We start from a structure (PBS-1) based on a directional coupler with metamaterial cladding combined with a bent waveguide with metamaterial cladding at the outer side in the role of a TE polarizer at the Thru port of the device. To increase BW we propose the improved concept (PBS-2) - a metamaterial compact dual Mach-Zehnder Interferometer structure in combination with the TE polarizer. Numerical simulations reveal that an exceptionally high ER over 35 dB can be achieved in a BW of 263 nm with insertion loss (IL) below 1 dB in case of PBS-2. The designed device has a footprint of 82 µm. Measurement results reveal that an ER > 30 dB is achievable in a BW of at least 140 nm (limited by the laser tuning range).
Collapse
|
6
|
Moeinimaleki B, Kaatuzian H, Livani AM. Design and simulation of a plasmonic density nanosensor for polarizable gases. Appl Opt 2022; 61:4735-4742. [PMID: 36255954 DOI: 10.1364/ao.457454] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/03/2022] [Accepted: 04/22/2022] [Indexed: 06/16/2023]
Abstract
In this paper, an optical method of measuring the mass density of polarizable gases is proposed using a plasmonic refractive index nano-sensor. Plasmonic sensors can detect very small changes in the refracting index of arbitrary dielectric materials. However, attributing them to a specific application needs more elaboration of the material's refractive index unit's (RIU) relation with the introduced application. In a gaseous medium, the optical properties of molecules are related to their dipole moment polarizability. Hence, the theoretical index-density relation of Lorentz-Lorenz is applied in the proposed sensing mechanism to interpret changes in the gas' refractive index and to changes in its density. The proposed plasmonic mass density sensor shows a sensitivity of 348.8nm/(gr/cm3) for methane gas in the visible light region. This sensor can be integrated with photonic circuits for gas sensing purposes.
Collapse
|
7
|
Lian Z, Chen D, Li S. Investigation on the Correlation between Dispersion Characteristics at Terahertz Range and Dielectric Permittivity at Low Frequency of Epoxy Resin Nanocomposites. Polymers (Basel) 2022; 14:polym14040827. [PMID: 35215739 PMCID: PMC8879792 DOI: 10.3390/polym14040827] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/25/2022] [Revised: 02/11/2022] [Accepted: 02/18/2022] [Indexed: 12/10/2022] Open
Abstract
Despite the extensive research on nanocomposites, a fundamental theory on the interface region is still difficult to achieve. In the present paper, we chose epoxy resin and nano-SiO2, nano-SiC, nano-ZnO to prepare three kinds of nanocomposites. The dispersion characteristics at the terahertz range and dielectric permittivity at 1 Hz of epoxy resin-based nanocomposites were investigated. The reduction of the permittivity of nanocomposites at a slight filler concentration was absent at the terahertz range. The measurement results at 1 Hz show that the interaction between nano-SiO2, nano-SiC particles and epoxy resin was strong with the modification of the silane coupling agent. However, the modification of nano-ZnO particles was invalid. The Lorentz harmonic oscillator model was employed to fit the dispersion characteristics. The relevance between the damping constant and the dielectric permittivity at low frequency was established, indicating that the increase in the damping coefficient results from the restriction of the molecular chain motion by the interfacial region. The present results in this paper reveal a bright prospect of terahertz time-domain spectroscopy in establishing the theory of nanocomposite dielectric.
Collapse
Affiliation(s)
- Ze Lian
- State Grid Shanxi Electric Power Research Institute, Taiyuan 030001, China;
- State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an 710049, China;
- Correspondence: or ; Tel.: +86-15333662660
| | - Danyang Chen
- State Grid Shanxi Electric Power Research Institute, Taiyuan 030001, China;
| | - Shengtao Li
- State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an 710049, China;
| |
Collapse
|
8
|
Zhang J, Xiang Y, Wang C, Chen Y, Tjin SC, Wei L. Recent Advances in Optical Fiber Enabled Radiation Sensors. Sensors (Basel) 2022; 22:s22031126. [PMID: 35161870 PMCID: PMC8840197 DOI: 10.3390/s22031126] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/30/2021] [Revised: 01/23/2022] [Accepted: 01/27/2022] [Indexed: 02/07/2023]
Abstract
Optical fibers are being widely utilized as radiation sensors and dosimeters. Benefiting from the rapidly growing optical fiber manufacturing and material engineering, advanced optical fibers have evolved significantly by using functional structures and materials, promoting their detection accuracy and usage scenarios as radiation sensors. This paper summarizes the current development of optical fiber-based radiation sensors. The sensing principles of both extrinsic and intrinsic optical fiber radiation sensors, including radiation-induced attenuation (RIA), radiation-induced luminescence (RIL), and fiber grating wavelength shifting (RI-GWS), were analyzed. The relevant advanced fiber materials and structures, including silica glass, doped silica glasses, polymers, fluorescent and scintillator materials, were also categorized and summarized based on their characteristics. The fabrication methods of intrinsic all-fiber radiation sensors were introduced, as well. Moreover, the applicable scenarios from medical dosimetry to industrial environmental monitoring were discussed. In the end, both challenges and perspectives of fiber-based radiation sensors and fiber-shaped radiation dosimeters were presented.
Collapse
Affiliation(s)
- Jing Zhang
- School of Mechanical Engineering and Electronic Information, China University of Geosciences, 388 Lumo Road, Wuhan 430074, China; (Y.X.); (C.W.); (Y.C.)
- Correspondence: (J.Z.); (L.W.)
| | - Yudiao Xiang
- School of Mechanical Engineering and Electronic Information, China University of Geosciences, 388 Lumo Road, Wuhan 430074, China; (Y.X.); (C.W.); (Y.C.)
| | - Chen Wang
- School of Mechanical Engineering and Electronic Information, China University of Geosciences, 388 Lumo Road, Wuhan 430074, China; (Y.X.); (C.W.); (Y.C.)
| | - Yunkang Chen
- School of Mechanical Engineering and Electronic Information, China University of Geosciences, 388 Lumo Road, Wuhan 430074, China; (Y.X.); (C.W.); (Y.C.)
| | - Swee Chuan Tjin
- School of Electrical and Electronic Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore;
| | - Lei Wei
- School of Electrical and Electronic Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore;
- Correspondence: (J.Z.); (L.W.)
| |
Collapse
|
9
|
Yadav A, Kumari R, Varshney SK, Lahiri B. Tunable phonon-plasmon hybridization in α-MoO 3-graphene based van der Waals heterostructures. Opt Express 2021; 29:33171-33183. [PMID: 34809134 DOI: 10.1364/oe.434993] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/11/2023]
Abstract
The plasmon-phonon hybridization behavior between anisotropic phonon polaritons (APhP) of orthorhombic phase Molybdenum Trioxide (α - MoO3) and the plasmon-polaritons of Graphene layer - forming a van der Waals (vdW) heterostructure is investigated theoretically in this paper. It is found that in-plane APhP shows strong interaction with graphene plasmons lying in their close vicinity, leading to large Rabi splitting. Anisotropic behavior of biaxial MoO3 shows the polarization-dependent response with strong anti-crossing behavior at 0.55 eV and 0.3 eV of graphene's Fermi potential for [100] and [001] crystalline directions, respectively. Numerical results reveal unusual electric field confinement for the two arms of enhanced hybrid modes: the first being confined in the graphene layer representing plasmonic-like behavior. The second shows volume confined zigzag pattern in hyperbolic MoO3. It is also found that the various plasmon-phonon hybridized modes could be wavelength tuned, simply by varying the Fermi potential of the graphene layer. The coupling response of the hybrid structure is studied analytically using the coupled oscillator model. Furthermore, we also infer upon the coupling strength and frequency splitting between the two layers with respect to their structural parameters and interlayer spacing. Our work will provide an insight into the active tunable property of hybrid van der Waals (vdW) structure for their potential application in sensors, detectors, directional spontaneous emission, as well as for the tunable control of the propagating polaritons in fields of flat dispersion where strong localization of photons can be achieved, popularly known as the flatband optics.
Collapse
|
10
|
Abstract
Enhanced optical absorption in two-dimensional (2D) materials has recently moved into the focus of nanophotonics research. In this work, we present a gain-assisted method to achieve critical coupling and demonstrate the maximum absorption in undoped monolayer graphene in the near-infrared. In a two-port system composed of photonic crystal slab loaded with graphene, the gain medium is introduced to adjust the dissipative rate to match the radiation rate for the critical coupling, which is accessible without changing the original structural geometry. The appropriate tuning of the gain coefficient also enables the critical coupling absorption within a wide wavelength regime for different coupling configurations. This work provides a powerful guide to manipulate light-matter interaction in 2D materials and opens up a new path to design ultra-compact and high-performance 2D material optical devices.
Collapse
Affiliation(s)
- Tingting Liu
- Laboratory of Millimeter Wave and Terahertz Technology, School of Physics and Electronics Information, Hubei University of Education, Wuhan 430205, People's Republic of China
| | - Chaobiao Zhou
- College of Mechanical and Electronic Engineering, Guizhou Minzu University, Guiyang 550025, People's Republic of China
| | - Shuyuan Xiao
- Institute for Advanced Study, Nanchang University, Nanchang 330031, People's Republic of China
- Jiangxi Key Laboratory for Microscale Interdisciplinary Study, Nanchang University, Nanchang 330031, People's Republic of China
| |
Collapse
|
11
|
Luo X. Subwavelength Artificial Structures: Opening a New Era for Engineering Optics. Adv Mater 2019; 31:e1804680. [PMID: 30468525 DOI: 10.1002/adma.201804680] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/21/2018] [Revised: 08/17/2018] [Indexed: 06/09/2023]
Abstract
In the past centuries, the scale of engineering optics has evolved toward two opposite directions: one is represented by giant telescopes with apertures larger than tens of meters and the other is the rapidly developing micro/nano-optics and nanophotonics. At the nanoscale, subwavelength light-matter interaction is blended with classic and quantum effects in various functional materials such as noble metals, semiconductors, phase-change materials, and 2D materials, which provides unprecedented opportunities to upgrade the performance of classic optical devices and overcome the fundamental and engineering difficulties faced by traditional optical engineers. Here, the research motivations and recent advances in subwavelength artificial structures are summarized, with a particular emphasis on their practical applications in super-resolution and large-aperture imaging systems, as well as highly efficient and spectrally selective absorbers and emitters. The role of dispersion engineering and near-field coupling in the form of catenary optical fields is highlighted, which reveals a methodology to engineer the electromagnetic response of complex subwavelength structures. Challenges and tentative solutions are presented regarding multiscale design, optimization, fabrication, and system integration, with the hope of providing recipes to transform the theoretical and technological breakthroughs on subwavelength hierarchical structures to the next generation of engineering optics, namely Engineering Optics 2.0.
Collapse
Affiliation(s)
- Xiangang Luo
- State Key Laboratory of Optical Technologies on Nano-Fabrication and Micro-Engineering, Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu, 610209, China
- School of Optoelectronics, University of Chinese Academy of Sciences, Beijing, 100049, China
| |
Collapse
|
12
|
He Y, Luo J, Li K, Luo B, Zhang J, Yin H, Wu W. Influence of CH4–Ar ratios on the composition, microstructure and optical properties of Be2C films synthesized by DC reactive magnetron sputtering. RSC Adv 2016. [DOI: 10.1039/c6ra02141g] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
XPS results revealed that CH content increased with the increasing of CH4–Ar ratios, meanwhile, Be2C was the main component in films with CH4–Ar ratios < 5% and hydrocarbon films were obtained when ratios exceed 15%.
Collapse
Affiliation(s)
- Yudan He
- Research Center of Laser Fusion
- China Academy of Engineering Physics
- Mianyang
- China
| | - Jiangshan Luo
- Research Center of Laser Fusion
- China Academy of Engineering Physics
- Mianyang
- China
| | - Kai Li
- Research Center of Laser Fusion
- China Academy of Engineering Physics
- Mianyang
- China
| | - Bingchi Luo
- Research Center of Laser Fusion
- China Academy of Engineering Physics
- Mianyang
- China
- Science and Technology on Plasma Physics Laboratory
| | - Jiqiang Zhang
- Research Center of Laser Fusion
- China Academy of Engineering Physics
- Mianyang
- China
| | - Hongbu Yin
- Research Center of Laser Fusion
- China Academy of Engineering Physics
- Mianyang
- China
| | - Weidong Wu
- Research Center of Laser Fusion
- China Academy of Engineering Physics
- Mianyang
- China
- IFSA Collaborative Innovation Center
| |
Collapse
|
13
|
Alavikia B, Kabiri A, Ramahi OM. Poynting theorem constraints on the signs of the imaginary parts of the electromagnetic constitutive parameters. J Opt Soc Am A Opt Image Sci Vis 2015; 32:522-532. [PMID: 26366761 DOI: 10.1364/josaa.32.000522] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
In time harmonic analysis, media composed of sub-wavelength metallic or dielectric inclusions are described by complex and dispersive effective constitutive parameters. A study of such parameters based on the conservation law of energy and causality is presented. We derive a set of general constraints on the real and imaginary parts of the constitutive parameters for lossy and lossless media in terms of electric and magnetic loss tangents. It is shown that a passive medium can indeed have a negative imaginary part of either the permeability or permittivity over a range of frequencies. These findings are consistent with the principles of causality and energy conservation.
Collapse
|
14
|
Abstract
We propose and simulate the characteristics of optical filters based on subwavelength gratings. In particular, we demonstrate through numerical simulations the feasibility of implementing SWG Bragg gratings in silicon-on-insulator (SOI). We also propose SWG ring resonators in SOI and verify their operation using numerical simulations and experiments. The fabricated devices exhibit an extinction ratio as large as 30 dB and a Q-factor as high as ~20,000. These fundamental SWG filters can serve as building blocks for more complex devices.
Collapse
|
15
|
Abstract
We present a theoretical study of the optical properties of a strongly coupled metallic dimer when an ensemble of molecules is placed in the inter-particle cavity. The linking molecules are characterized by an excitonic transition which couples to the Bonding Dimer Plasmon (BDP) and the Bonding Quadrupolar Plasmon (BQP) resonances, arising from the hybridization of the dipolar and quadrupolar modes of the individual nanoparticles, respectively. As a consequence, both modes split into two coupled plasmon-exciton modes, so called plexcitons. The Charge Transfer Plasmon (CTP) resonance, involving plasmonic oscillations of the dimer as a whole, arises when the conductance of the excitonic junction is above a threshold value. The possibility of exploiting plexcitonic resonances for sensing is explored in detail. We find high sensitivity to the environment when different dielectric embedding media are considered. Contrary to standard methods, we propose a new framework for effective sensing based on the relative intensity of plexcitonic peaks.
Collapse
Affiliation(s)
- Olalla Pérez-González
- Department of Electricity and Electronics, University of Basque Country (UPV/EHU), 48080 Bilbao, Spain
| | | | | |
Collapse
|
16
|
Abstract
The evolution of the pulse centroid velocity of the Poynting vector for both ultrawideband rectangular and ultrashort Gaussian envelope pulses is presented as a function of the propagation distance in a dispersive, absorptive dielectric material. The index of refraction of the material is described by the Lorentz-Lorenz formula in which a single-resonance Lorentz model is used to describe the mean molecular polarizability. The results show that, as the propagation distance increases above a value that is on the order of an absorption depth at the pulse carrier frequency, the centroid velocity of an ultrawideband/ultrashort pulse tends toward the rate at which the Brillouin precursor travels through the medium. For small propagation distances when the carrier frequency of the optical pulse lies in the absorption band of the material, the centroid velocity can take on superluminal and negative values.
Collapse
Affiliation(s)
- Natalie A Cartwright
- College of Engineering and Mathematics, University of Vermont, Burlington, Vermont 05405, USA.
| | | |
Collapse
|