Delivery of sub-100fs pulses through 8m of hollow-core fiber using soliton compression

Ultralow loss hollow-core negative curvature fibers with nested elliptical antiresonance tubes

Hollow-core negative curvature fibers can confine light within air core and have small nonlinearity and dispersion and high damage threshold, thereby attracting a great deal of interest in the field of hollow core fibers. However, reducing the loss of hollow-core negative curvature fibers is a serious problem. On this basis, three new types of fibers with different nested tube structures are proposed in the near-infrared spectral regions and compared in detail with a previously proposed hollow-core negative curvature fiber. We used finite-element method for numerical simulation studies of their transmission loss, bending loss, and single-mode performance, and then the transmission performance of various structural fibers is compared. We found that the nested elliptical antiresonant fiber 1 has better transmission performance than that of the three other types of fibers in the spectral range of 0.72-1.6 µm. Results show that the confinement loss of the LP₀₁ mode is as low as 6.45×10^-6 dB/km at λ = 1.06 µm. To the best of our knowledge, the record low level of confinement loss of hollow-core antiresonant fibers with nested tube structures was created. In addition, the nested elliptical antiresonant fiber 1 has better bending resistance, and its bending loss was below 2.99×10^-2 dB/km at 5 cm bending radius.

Tapered hollow-core photonic crystal fibers

In this communication, we will first review the recent advances of hollow-core photonic crystal fibers. Then, the possibility offered to tailor their optical properties by making tapers will be discussed.

Wideband low confinement loss anti-resonant hollow core fiber with nested U-shape tube

We propose a nested U-shape tube anti-resonant hollow core fiber (UARF) that can effectively reduce the confinement loss (CL) as well as the loss oscillations. The key parameters of UARF have been optimized via numerical analysis. Simulation results show that the CL of proposed UARF is lower than 0.01dB/km over a 550 nm operational bandwidth range from 1.3 µm to 1.85 µm. This CL is nearly one order of magnitude lower than the nested anti-resonant nodeless fiber (NANF). Moreover, the loss ratio between higher-order modes to the fundamental mode is verified to be more than 100,000 over a ultrawide bandwidth of 1000 nm, which indicates its excellent single mode performance. The tolerance towards the structure deformation of UARF has been evaluated for the purpose of practical fiber fabrication. Thus, the proposed UARF has potential application in large capacity data transmission, nonlinear optics, gas sensing and so on.

Design guidelines for normal-dispersion fiber optical parametric chirped-pulse amplifiers

We theoretically investigate methods of controlling pulse generation in normal-dispersion fiber optical parametric chirped-pulse amplifiers. We focus on high-energy, ultrashort pulses at wavelengths widely separated from that of the pump, and find that within this regime, a number of simple properties describe the essential phase and gain dynamics. Of primary importance are the relationships between the chirps of the pump, seed, and parametric gain, which we theoretically predict and then experimentally validate. By properly arranging these parameters, the signal and idler waves can be widely customized to fulfill a remarkable range of application requirements, spanning from narrowband to few-cycle.

Single-mode, low loss hollow-core anti-resonant fiber designs

In this paper, we numerically investigate various hollow-core anti-resonant (HC-AR) fibers towards low propagation and bend loss with effectively single-mode operation in the telecommunications window. We demonstrate how the propagation loss and higher-order mode modal contents are strongly influenced by the geometrical structure and the number of the anti-resonant cladding tubes. We found that 5-tube nested HC-AR fiber has a wider anti-resonant band, lower loss, and larger higher-order mode extinction ratio than designs with 6 or more anti-resonant tubes. A loss ratio between the higher-order modes and fundamental mode, as high as 12,000, is obtained in a 5-tube nested HC-AR fiber. To the best of our knowledge, this is the largest higher-order mode extinction ratio demonstrated in a hollow-core fiber at 1.55 μm. In addition, we propose a modified 5-tube nested HC-AR fiber, with propagation loss below 1 dB/km from 1330 to 1660 nm. This fiber also has a small bend loss of ~15 dB/km for a bend radius of 1 cm.

A Method to Process Hollow-Core Anti-Resonant Fibers into Fiber Filters

Hollow-Core Anti-Resonant Fiber (HC-ARF) shows promising applications. Nevertheless, there has been a persistent problem when it comes to all-fiber integration due to a lack of HC-ARF-based fiber components. In response to this remaining challenge, we investigate a reliable, versatile and efficient method to convert an HC-ARF into a fiber filter. By locally heating an HC-ARF with a CO2 laser, the fiber structure becomes deformed, and cladding capillaries shrink to produce a thicker wall. This process is analogous to “writing” a new fiber with a thicker wall on the original fiber, resulting in creating new high loss regions in the original transmission bands. Thus, the construction of a fiber filter is realized by “writing” a new fiber on the original fiber. The feasibility of this method is confirmed through experiments, adopting both one- and two-layer HC-ARF. The HC-ARF-based fiber filters are found to have transmission spectra consistent with simulation prediction. Both band pass and band reject fiber filters with more than a 20-dB extinction ratio are obtainable without extra loss. Thus, an in-fiber HC-ARF filter is demonstrated by the CO2 writing process. Its versatile approach promises controlled band selection and would find interesting applications to be discussed.

Several new directions for ultrafast fiber lasers [Invited]

Ultrafast fiber lasers have the potential to make applications of ultrashort pulses widespread - techniques not only for scientists, but also for doctors, manufacturing engineers, and more. Today, this potential is only realized in refractive surgery and some femtosecond micromachining. The existing market for ultrafast lasers remains dominated by solid-state lasers, primarily Ti:sapphire, due to their superior performance. Recent advances show routes to ultrafast fiber sources that provide performance and capabilities equal to, and in some cases beyond, those of Ti:sapphire, in compact, versatile, low-cost devices. In this paper, we discuss the prospects for future ultrafast fiber lasers built on new kinds of pulse generation that capitalize on nonlinear dynamics. We focus primarily on three promising directions: mode-locked oscillators that use nonlinearity to enhance performance; systems that use nonlinear pulse propagation to achieve ultrashort pulses without a mode-locked oscillator; and multimode fiber lasers that exploit nonlinearities in space and time to obtain unparalleled control over an electric field.

Low-loss single-mode hollow-core fiber with anisotropic anti-resonant elements

A hollow-core fiber using anisotropic anti-resonant tubes in the cladding is proposed for low loss and effectively single-mode guidance. We show that the loss performance and higher-order mode suppression is significantly improved by using symmetrically distributed anisotropic anti-resonant tubes in the cladding, elongated in the radial direction, when compared to using isotropic, i.e. circular, anti-resonant tubes. The effective single-mode guidance of the proposed fiber is achieved by enhancing the coupling between the cladding modes and higher-order-core modes by suitably engineering the anisotropic anti-resonant elements. With a silica-based fiber design aimed at 1.06 µm, we show that the loss extinction ratio between the higher-order core modes and the fundamental core mode can be more than 1000 in the range 1.0-1.65 µm, while the leakage loss of the fundamental core mode is below 15 dB/km in the same range.

Strong Raman-induced noninstantaneous soliton interactions in gas-filled photonic crystal fibers

We have developed an analytical model based on the perturbation theory to study the optical propagation of two successive solitons in hollow-core photonic crystal fibers filled with Raman-active gases. Based on the time delay between the two solitons, we have found that the trailing soliton dynamics can experience unusual nonlinear phenomena, such as spectral and temporal soliton oscillations and transport toward the leading soliton. The overall dynamics can lead to a spatiotemporal modulation of the refractive index with a uniform temporal period and a uniform or chirped spatial period.

Low-loss hollow-core silica fibers with adjacent nested anti-resonant tubes

We report on numerical design optimization of hollow-core anti-resonant fibers with the aim of reducing transmission losses. We show that re-arranging the nested anti-resonant tubes in the cladding to be adjacent has the effect of significantly reducing leakage as well as bending losses, and for reaching high loss extinction ratios between the fundamental mode and higher order modes. We investigate two versions of the proposed design, one optimized for the mid-IR and another scaled down version for the near-IR and compare them in detail with previously proposed anti-resonant fiber designs including nested elements. Our proposed design is superior with respect to obtaining the lowest leakage losses and the bend losses are also much lower than for the previous designs. Leakage losses as low as 0.0015 dB/km and bending losses of 0.006 dB/km at 5 cm bending radius are predicted at the ytterbium lasing wavelength 1.06 µm. When optimizing the higher-order-mode extinction ratio, the low leakage loss is sacrificed to get an effective single-mode behavior of the fiber. We show that the higher-order-mode extinction ratio is more than 1500 in the range 1.0-1.1 µm around the ytterbium lasing wavelength, while in the mid-IR it can be over 100 around λ = 2.94 μm. This is higher than the previously considered structures in the literature using nested tubes.

Fiber-coupled high-speed asynchronous optical sampling with sub-50 fs time resolution

We present a fiber-coupled pump-probe system with a sub-50 fs time resolution and a nanosecond time window, based on high-speed asynchronous optical sampling. By use of a transmission grism pulse compressor, we achieve pump pulses with a pulse duration of 42 fs, an average power of 300 mW and a peak power exceeding 5 kW at a pulse repetition rate of 1 GHz after 6 m of optical fiber. With this system we demonstrate thickness mapping of soft X-ray mirrors at a sub-nm thickness resolution on a cm(2) scan area. In addition, terahertz field generation with resolved spectral components of up to 3.5 THz at a GHz frequency resolution is demonstrated.

Pulse quality analysis on soliton pulse compression and soliton self-frequency shift in a hollow-core photonic bandgap fiber

A numerical investigation of low-order soliton evolution in a proposed seven-cell hollow-core photonic bandgap fiber is reported. In the numerical simulation, we analyze the pulse quality evolution in soliton pulse compression and soliton self-frequency shift in three fiber structures with different cross-section sizes. In the simulation, we consider unchirped soliton pulses (of 400 fs) at the wavelength of 1060 nm. Our numerical results show that the seven-cell hollow-core photonic crystal fiber, with a cross-section size reduction of 2%, promotes the pulse quality on the soliton pulse compression and soliton self-frequency shift. For an input soliton pulse of order 3 (which corresponds to an energy of 1.69 μJ), the pulse gets compressed with a factor of up to 5.5 and a quality factor of 0.73, in a distance of 12 cm. It also experiences a soliton-self frequency shift of up to 28 nm, in a propagation length of 6 m, with a pulse shape quality of ≈ 0.80.

Coherent supercontinuum generation in photonic crystal fiber with all-normal group velocity dispersion

We demonstrate supercontinuum generation in a photonic crystal fiber with all-normal group velocity dispersion. Pumping a short section of this fiber with compressed pulses from a compact amplified fiber laser generates a 200 nm bandwidth continuum with typical self-phase-modulation characteristics. We demonstrate that the supercontinuum is compressible to a duration of 26 fs. It therefore has a high degree of coherence between all the frequency components, and is a single pulse in the time domain. A smooth, flat spectrum spanning 800 nm is achieved using a longer piece of fiber.

Ultrashort pulse compression and delivery in a hollow-core photonic crystal fiber at 540 nm wavelength

We have fabricated a bandgap-guiding hollow-core photonic crystal fiber (PCF) capable of transmitting and compressing ultrashort pulses in the green spectral region around 532 nm. When propagating subpicosecond pulses through 1 m of this fiber, we have observed soliton-effect temporal compression by up to a factor of 3 to around 100 fs. This reduces the wavelength at which soliton effects have been observed in hollow-core PCF by over 200 nm. We have used the pulses delivered at the output of the fiber to machine micrometer-scale features in copper.

Matched cascade of bandgap-shift and frequency-conversion using stimulated Raman scattering in a tapered hollow-core photonic crystal fibre

We report on a novel means which lifts the restriction of the limited optical bandwidth of photonic bandgap hollow-core photonic crystal fiber on generating high order stimulated Raman scattering in gaseous media. This is based on H(2)-filled tapered HC-PCF in which the taper slope is matched with the effective length of Raman process. Raman orders outside the input-bandwidth of the HC-PCF are observed with more than 80% quantum-conversion using a compact, low-power 1064 nm microchip laser. The technique opens prospects for efficient sources in spectral regions that are poorly covered by currently existing lasers such as mid-IR.

Simplified hollow-core photonic crystal fiber

An original design of hollow-core photonic crystal fiber composed of a thin silica ring suspended in air by six silica struts is proposed. This structure can be viewed as a simplified Kagomé-lattice fiber reduced to one layer of air holes. By working on the core surround parameters, an efficient antiresonant air guiding was successfully demonstrated. Two large low-loss windows (visible/IR) were measured with a minimum attenuation less than 0.2 dB radicalm at yellow wavelengths, comparable with state-of-the-art designs. The curvature behavior was also studied, showing low bending loss sensitivity for the fundamental transmission band. These relevant features might open a new route to propose original hollow-core fiber designs while making their production simpler and faster than previously.

Theory of adiabatic pressure-gradient soliton compression in hollow-core photonic bandgap fibers

Adiabatic soliton compression by means of a pressure gradient in a hollow-core photonic bandgap fiber is investigated theoretically and numerically. It is shown that the duration of the compressed pulse is limited mainly by the interplay between third-order dispersion and the Raman-induced soliton frequency shift. Analytical expressions for this limit are derived and compared with results of detailed numerical simulations for a realistic fiber structure.

Chirped multilayer hollow waveguides with broadband transmission

We show that a genetic algorithm can be used to optimize the layer thicknesses of a hollow waveguide with a multilayer dielectric cladding. It is shown that in such "chirped" hollow waveguide low loss over a wavelength range with more than one octave width can be achieved. We show that dispersion control is possible in such waveguides.

Dispersive pulse compression in hollow-core photonic bandgap fibers

Compression of linearly chirped picosecond pulses in hollow-core photonic bandgap fibers is investigated numerically. The modal properties of the fibers are modeled using the finite-element technique, whereas nonlinear propagation is described by a generalized nonlinear Schrödinger equation, which accounts both for the composite nature of the nonlinearity and the strong mode profile dispersion. Power limits for compression with more than 90% of the pulse energy in the main peak of the compressed pulse are investigated as a function of fiber design, and the temporal and spectral widths of the input pulse. The validity of approximate scaling rules is investigated, and figures of merit for fiber design are discussed.