Double-angle multilayer mirrors with smooth dispersion characteristics

Few-cycle pulse compression and white light generation in cascaded multipass cells

We report supercontinuum generation and pulse compression in two stacked multipass cells based on dielectric mirrors. The 230 fs pulses at 1 MHz containing 12 µJ are compressed by a factor of 33 down to 7 fs, corresponding to 1.0 GW peak power and overall transmission of 84%. The source is particularly interesting for such applications as time-resolved angle-resolved photoemission spectroscopy (ARPES), photoemission electron microscopy, and nonlinear spectroscopy.

Complementary dispersive mirror pair produced in one coating run based on desired non-uniformity

We report a novel one-coating-run method for producing an octave-spanning complementary dispersive mirror (DM) pair. The anti-phase group delay dispersion (GDD) oscillations are realized by two mirrors of the DM pair due to the certain thickness difference. Both mirrors are deposited within a single coating run enabled by the non-uniformity of the ion beam sputtering coating plant, which is obtained by tuning the distance between the source target and coating substrates. Since the DM pair is produced in a single deposition run, the GDD performance is more robust against deposition errors than that of the conventional complementary DM pair, in which two separated coating runs are necessary. Moreover, the new DM pair is compatible for both laser polarizations under the same angle of incidence, which could effectively reduce the difficulties of alignment for their implementation in laser systems than the double angle DM pair. The new DM pair is successfully applied to compress pulses from a Ti: Sapphire laser system down to 4.26 fs in pulse duration.

Phase-locking of time-delayed attosecond XUV pulse pairs

We present a setup for the generation of phase-locked attosecond extreme ultraviolet (XUV) pulse pairs. The attosecond pulse pairs are generated by high harmonic generation (HHG) driven by two phase-locked near-infrared (NIR) pulses that are produced using an actively stabilized Mach-Zehnder interferometer compatible with near-single cycle pulses. The attosecond XUV pulses can be delayed over a range of 400 fs with a sub-10-as delay jitter. We validate the precision and the accuracy of the setup by XUV optical interferometry and by retrieving the energies of Rydberg states of helium in an XUV pump-NIR probe photoelectron spectroscopy experiment.

Slow light nanocoatings for ultrashort pulse compression

Transparent materials do not absorb light but have profound influence on the phase evolution of transmitted radiation. One consequence is chromatic dispersion, i.e., light of different frequencies travels at different velocities, causing ultrashort laser pulses to elongate in time while propagating. Here we experimentally demonstrate ultrathin nanostructured coatings that resolve this challenge: we tailor the dispersion of silicon nanopillar arrays such that they temporally reshape pulses upon transmission using slow light effects and act as ultrashort laser pulse compressors. The coatings induce anomalous group delay dispersion in the visible to near-infrared spectral region around 800 nm wavelength over an 80 nm bandwidth. We characterize the arrays' performance in the spectral domain via white light interferometry and directly demonstrate the temporal compression of femtosecond laser pulses. Applying these coatings to conventional optics renders them ultrashort pulse compatible and suitable for a wide range of applications.

Tracking Ultrafast Structural Dynamics by Time-Domain Raman Spectroscopy

In traditional Raman spectroscopy, narrow-band light is irradiated on a sample, and its inelastic scattering, i.e., Raman scattering, is detected. The energy difference between the Raman scattering and the incident light corresponds to the vibrational energy of the molecule, providing the Raman spectrum that contains rich information about the molecular-level properties of the materials. On the other hand, by using ultrashort optical pulses, it is possible to induce Raman-active coherent nuclear motion of the molecule and to observe the molecular vibration in real time. Moreover, this time-domain Raman measurement can be combined with femtosecond photoexcitation, triggering chemical changes, which enables tracking ultrafast structural dynamics in a form of “time-resolved” time-domain Raman spectroscopy, also known as time-resolved impulsive stimulated Raman spectroscopy. With the advent of stable, ultrashort laser pulse sources, time-resolved impulsive stimulated Raman spectroscopy now realizes high sensitivity and a wide detection frequency window from THz to 3000 cm^–1, and has seen success in unveiling the molecular mechanisms underlying the efficient functions of complex molecular systems. In this Perspective, we overview the present status of time-domain Raman spectroscopy, particularly focusing on its application to the study of femtosecond structural dynamics. We first explain the principle and a brief history of time-domain Raman spectroscopy and then describe the apparatus and recent applications to the femtosecond dynamics of complex molecular systems, including proteins, molecular assemblies, and functional materials. We also discuss future directions for time-domain Raman spectroscopy, which has reached a status allowing a wide range of applications.

Ultrabroadband 2D electronic spectroscopy with high-speed, shot-to-shot detection

Two-dimensional electronic spectroscopy (2DES) is an incisive tool for disentangling excited state energies and dynamics in the condensed phase by directly mapping out the correlation between excitation and emission frequencies as a function of time. Despite its enhanced frequency resolution, the spectral window of detection is limited to the laser bandwidth, which has often hindered the visualization of full electronic energy relaxation pathways spread over the entire visible region. Here, we describe a high-sensitivity, ultrabroadband 2DES apparatus. We report a new combination of a simple and robust setup for increased spectral bandwidth and shot-to-shot detection. We utilize 8-fs supercontinuum pulses generated by gas filamentation spanning the entire visible region (450 - 800 nm), which allows for a simultaneous interrogation of electronic transitions over a 200-nm bandwidth, and an all-reflective interferometric delay system with angled nanopositioner stages achieves interferometric precision in coherence time control without introducing wavelength-dependent dispersion to the ultrabroadband spectrum. To address deterioration of detection sensitivity due to the inherent instability of ultrabroadband sources, we introduce a 5-kHz shot-to-shot, dual chopping acquisition scheme by combining a high-speed line-scan camera and two optical choppers to remove scatter contributions from the signal. Comparison of 2D spectra acquired by shot-to-shot detection and averaged detection shows a 15-fold improvement in the signal-to-noise ratio. This is the first direct quantification of detection sensitivity on a filamentation-based ultrabroadband 2DES apparatus.

Development of a 10 kHz high harmonic source up to 140 eV photon energy for ultrafast time-, angle-, and phase-resolved photoelectron emission spectroscopy on solid targets

We present a newly developed high harmonic beamline for time-, angle-, and carrier-envelope phase-resolved extreme ultraviolet photoemission spectroscopy on solid targets for the investigation of ultrafast band structure dynamics in the low-fs to sub-fs time regime. The source operates at a repetition rate of 10 kHz and is driven by 5 fs few-cycle near-infrared laser pulses generating high harmonic radiation with photon energies up to 120 eV at a feasible flux. The experimental end station consists of a complementary combination of photoelectron detectors which are able to spectroscopically address electron dynamics both in real and in k-space. The versatility of the source is completed by a phase-meter which allows for tracking the carrier-envelope phase for each pulse and which is synchronized to the photoelectron detectors, thus enabling phase sensitive measurements on the one hand and the selection of single attosecond pulses for ultimate time resolution in pump-probe experiments on the other hand. We demonstrate the applicability of the source by an angle- and carrier-envelope phase-resolved photoemission measurement on a tungsten (110) surface with 95 eV extreme ultraviolet radiation.

Generating high-contrast, near single-cycle waveforms with third-order dispersion compensation

Femtosecond laser pulses lasting only a few optical periods hold the potential for probing and manipulating the electronic degrees of freedom within matter. However, the generation of high-contrast, few-cycle pulses in the high power limit still remains nontrivial. In this Letter, we present the application of ammonium dihydrogen phosphate (ADP) as an optical medium for compensating for the higher-order dispersion of a carrier-envelope stable few-cycle waveform centered at 735 nm. The ADP crystal is capable of removing the residual third-order dispersion present in the spectral phase of an input pulse, resulting in near-transform-limited 2.9 fs pulses lasting only 1.2 optical cycles in duration. By utilizing these high-contrast, few-cycle pulses for high-harmonic generation, we are able to produce nanojoule-scale, isolated attosecond pulses.

Dispersive mirror for the mid-infrared spectral range of 9-11.5 μm

A dispersive multilayer interference mirror with a group delay dispersion (GDD) of +1500  fs² for the spectral range of 9-11.5 μm is presented. It is designed to compensate the GDD of an ultrashort light pulse gained when transmitting 1 mm of a zinc selenide substrate. The coating process for the mirror manufacturing is described. The optical properties of the mirror are fully characterized by measuring the group delay, the GDD, the reflectance, and the transmittance.

Broadband 7-fs diffractive-optic-based 2D electronic spectroscopy using hollow-core fiber compression

We demonstrate noncollinear coherent two-dimensional (2D) electronic spectroscopy for which broadband pulses are generated in an argon-filled hollow-core fiber pumped by a 1-kHz Ti:Sapphire laser. Compression is achieved to 7 fs duration (TG-FROG) using dispersive mirrors. The hollow fiber provides a clean spatial profile and smooth spectral shape in the 500-700 nm region. The diffractive-optic-based design of the 2D spectrometer avoids directional filtering distortions and temporal broadening from time smearing. For demonstration we record data of cresyl-violet perchlorate in ethanol and use phasing to obtain broadband absorptive 2D spectra. The resulting quantum beating as a function of population time is consistent with literature data.

High dispersive mirrors for erbium-doped fiber chirped pulse amplification system

We report on the development of near-infrared high dispersive mirrors (HDM) with a group delay dispersion (GDD) of -2000 fs². A HDM pair based on one optimized result at two reference wavelengths (1550 nm and 1560 nm) can reduce the total oscillation of the GDD effectively in the wavelength range of 1530-1575 nm. This HDM pair is designed and fabricated in a single coating run by means of the nonuniformity in film deposition. For the first time, near-infrared HDMs with two different reference wavelengths have been successfully applied in an erbium-doped fiber chirped pulse amplification system for the compression of 4.73 ps laser pulses to 380 fs.

Octave spanning wedge dispersive mirrors with low dispersion oscillations

A novel concept for octave spanning dispersive mirrors with low spectral dispersion oscillations is presented. The key element of the so-called wedge dispersive mirror is a slightly wedged layer which is coated on a specially optimized dispersive multilayer stack by a common sputter coating process. The group delay dispersion (GDD) of a pulse reflected on a wedge dispersive mirror is nearly free of oscillations. Fabricated mirrors with negative GDD demonstrate the compression of a pulse down to 3.8 fs as good as double angled mirrors optimized for the same bandwidth.

Visualization of bond rearrangements in acetylene using near single-cycle laser pulses

The migration of hydrogen atoms resulting in the isomerization of hydrocarbons is an important process which can occur on ultrafast timescales. Here, we visualize the light-induced hydrogen migration of acetylene to vinylidene in an ionic state using two synchronized 4 fs intense laser pulses. The first pulse induces hydrogen migration, and the second is used for monitoring transient structural changes via Coulomb explosion imaging. Varying the time delay between the pulses reveals the migration dynamics with a time constant of 54 ± 4 fs as observed in the H⁺ + H⁺ + CC⁺ channel. Due to the high temporal resolution, vibrational wave-packet motions along the CC- and CH-bonds are observed. Even though a maximum in isomerization yield for kinetic energy releases above 16 eV is measured, we find no indication for a backwards isomerization — in contrast to previous measurements. Here, we propose an alternative explanation for the maximum in isomerization yield, namely the surpassing of the transition state to the vinylidene configuration within the excited dication state.

Broadband thin-film polarizer for 12 fs applications

A broadband non-dispersive thin-film polarizer for ultrafast applications is presented. The polarizer has a controllable flat-phase and a high extinction ratio of 23:1 in the working bandwidth from 680 nm to 900 nm. This bandwidth allows supporting laser pulses down to 12 fs. The unavoidable mechanical stress of the interference coating is completely compensated by a specially designed antireflection coating on the second side of the substrate, allowing the use of thin substrates.

Carrier-envelope-phase insensitivity in high-order harmonic generation driven by few-cycle laser pulses

We present evidence for self-stabilization of the relative spectral phase of high-order harmonic emission against intensity variations of the driving field. Our results demonstrate that, near the laser focus, phase matching of the harmonic field from a macroscopic target can compensate for the intensity dependence of the intrinsic phase of the harmonics emitted by a single radiator. As a consequence, we show experimentally and theoretically the insensitivity of the harmonic spectra produced at the laser focus against variations of the carrier-envelope phase (CEP) of a sub-two-cycle driving field. In addition, the associated attosecond pulse trains exhibit phase locking against CEP changes of the few-cycle driver.

High-power multi-megahertz source of waveform-stabilized few-cycle light

Waveform-stabilized laser pulses have revolutionized the exploration of the electronic structure and dynamics of matter by serving as the technological basis for frequency-comb and attosecond spectroscopy. Their primary sources, mode-locked titanium-doped sapphire lasers and erbium/ytterbium-doped fibre lasers, deliver pulses with several nanojoules energy, which is insufficient for many important applications. Here we present the waveform-stabilized light source that is scalable to microjoule energy levels at the full (megahertz) repetition rate of the laser oscillator. A diode-pumped Kerr-lens-mode-locked Yb:YAG thin-disk laser combined with extracavity pulse compression yields waveform-stabilized few-cycle pulses (7.7 fs, 2.2 cycles) with a pulse energy of 0.15 μJ and an average power of 6 W. The demonstrated concept is scalable to pulse energies of several microjoules and near-gigawatt peak powers. The generation of attosecond pulses at the full repetition rate of the oscillator comes into reach. The presented system could serve as a primary source for frequency combs in the mid infrared and vacuum UV with unprecedented high power levels.

Frequency combs have revolutionized the study of electronic structures and dynamics of matter but currently used lasers systems are limited in terms of achievable pulse energies. Here, Pronin et al. demonstrate few cycle pulse emission from a thin-disk laser with 150 nJ pulse energy and 7.7 fs pulse duration.

Compressing μJ-level pulses from 250 fs to sub-10 fs at 38-MHz repetition rate using two gas-filled hollow-core photonic crystal fiber stages

Compression of 250-fs, 1-μJ pulses from a KLM Yb:YAG thin-disk oscillator down to 9.1 fs is demonstrated. A kagomé-PCF with a 36-μm core-diameter is used with a pressure gradient from 0 to 40 bar of krypton. Compression to 22 fs is achieved by 1200  fs² group-delay-dispersion provided by chirped mirrors. By coupling the output into a second kagomé-PCF with a pressure gradient from 0 to 25 bar of argon, octave spanning spectral broadening via the soliton-effect is observed at 18-W average output power. Self-compression to 9.1 fs is measured, with compressibility to 5 fs predicted. Also observed is strong emission in the visible via dispersive wave generation, amounting to 4% of the total output power.

Simultaneous compression, characterization and phase stabilization of GW-level 1.4 cycle VIS-NIR femtosecond pulses using a single dispersion-scan setup

We have temporally characterized, dispersion compensated and carrier-envelope phase stabilized 1.4-cycle pulses (3.2 fs) with 160 µJ of energy at 722 nm using a minimal and convenient dispersion-scan setup. The setup is all inline, does not require interferometric beamsplitting, and uses components available in most laser laboratories. Broadband minimization of third-order dispersion using propagation in water enabled reducing the compressed pulse duration from 3.8 to 3.2 fs with the same set of chirped mirrors. Carrier-envelope phase stabilization of the octave-spanning pulses was also performed by the dispersion-scan setup. This unprecedentedly simple and reliable approach provides reproducible CEP-stabilized pulses in the single-cycle regime for applications such as CEP-sensitive spectroscopy and isolated attosecond pulse generation.

Conversion of chirp in fiber compression

Focusing positively chirped femtosecond pulses into nonlinear fibers provides significant spectral broadening and compression at higher pulse energies than achievable conventionally because self-focusing and damage are avoided. Here, we investigate the transfer of input to output chirp in such an arrangement. Our measurements show that the group delay dispersion of the output pulse, originating from the nonlinearities, is considerably reduced as compared to the initial value, by about a factor of 10. The mechanism of chirp reduction is understood by an interplay of self-phase modulation with initial chirp within the fiber. A simple model calculation based on this picture yields satisfactory agreement with the observations and predicts significant chirp reduction for input pulses up to the μJ regime. In practice, the reduction of chirp observed here allows for compressing the spectrally broadened intense pulses by ultrabroadband dispersive multilayer mirrors of quite moderate dispersion.

Plasma-ion-assisted coatings for 15 femtosecond laser systems

Large-aperture deposition of high-laser-damage-threshold, low-dispersion optical coatings for 15 femtosecond pulses have been developed using plasma-ion-assisted electron-beam evaporation. Coatings are demonstrated over 10 in. aperture substrates.

Reverse engineering of multilayer coatings for ultrafast laser applications

We propose a reliable reverse engineering approach for a postproduction characterization of complicated optical coatings for ultrafast laser applications. We perform the postproduction characterization on the basis of in situ broadband monitoring data and validate the results using ex situ transmittance data and group delay measurements.

Empirical study of the group delay dispersion achievable with multilayer mirrors

With the help of the most advanced algorithms we obtained many dozens of multilayer dispersive mirror designs to empirically find limits for the maximum achievable negative value of the group delay dispersion (GDD). This value depends on the total thickness of coatings and layer material combination. Nb(2)O(5)/SiO(2) and Ta(2)O(50/SiO(2) combinations are studied in detail, for combinations HfO(2)/SiO(2) and TiO(2)/SiO(2) we obtained estimations for two bandwidths. We also show that reasonable values of third-order dispersion have no significant impact on the obtained results. Current state-of-the-art technology allows to produce designs with total physical thicknesses slightly higher than 10 µm and to achieve maximum negative GDD values corresponding to this total design thickness. Designs with total physical thickness of 15 µm and 20 µm are not realized yet due to high sensitivity to deposition errors.

Measurements of the group delay and the group delay dispersion with resonance scanning interferometer

We developed a method for group delay and group delay dispersion measurements, based on location of interference resonance peaks. Such resonance peaks can be observed in transmittance or in reflectance when two mirrors are placed parallel to each other and separated by a thin air spacer. By using a novel approach, based on simultaneous processing of the data acquired for different spacer distances we obtained reliable results with high resolution. Measurements were performed both in transmittance and reflectance layouts depending on the reflectivity of the mirror to be measured. The developed method allows dispersion measurements of ultraviolet mirrors and ultra-broadband mirrors spanning more than one optical octave to be performed.

Pump-seed synchronization for MHz repetition rate, high-power optical parametric chirped pulse amplification

We report on an active synchronization between two independent mode-locked lasers using a combined electronic-optical feedback. With this scheme, seed pulses at MHz repetition rate were amplified in a non-collinear optical parametric chirped pulse amplifier (OPCPA). The amplifier was seeded with stretched 1.5 nJ pulses from a femtosecond Ti:Sapphire oscillator, while pumped with the 1 ps, 2.9 µJ frequency-doubled output of an Yb:YAG thin-disk oscillator. The residual timing jitter between the two oscillators was suppressed to 120 fs (RMS), allowing for an efficient and broadband amplification at 11.5 MHz to a pulse energy of 700 nJ and an average power of 8 W. First compression experiment with 240 nJ amplified pulse energy resulted in a pulse duration of ~10 fs.

High-dispersive mirrors for high power applications

We report on the development and manufacturing of two different types of high-dispersive mirrors (HDM). One of them provides a record value for the group delay dispersion (GDD) of -4000 fs2 and covers the wavelength range of 1027-1033 nm, whereas the other one provides -3000 fs2 over the wavelength range of 1020-1040 nm. Both of the fabricated mirrors exhibit a reflectance of >99.9% and are well suited for intracavity applications. Mirrors of the second type have been successfully employed in a Kerr-lens mode-locked Yb:YAG thin-disk oscillator for the generation of 200-fs pulses with multi-10-W average power.

16 fs, 350 nJ pulses at 5 MHz repetition rate delivered by chirped pulse compression in fibers

We demonstrate a simple approach for broadening and compression of intense pulses at megahertz repetition rates by self-phase modulation in nonlinear photonic crystal fibers. In order to avoid damage by self-focusing, we positively chirp the input pulses, which allows coupling of significantly more energy into the fiber, while maintaining the same spectral bandwidth and compression as compared to the Fourier-limited case at lower energy. Using a commercial long-cavity Ti:sapphire oscillator with 55 fs, 400 nJ pulses at 5 MHz, we generate 16 fs, 350 nJ pulses, which is a factor of 4 more energy than possible with unchirped input pulses. Self-phase-modulated spectra supporting 11 fs duration are also shown with 350 nJ pulse energy. Excellent stability is recorded over at least 1 h.

Group delay dispersion measurement of a dispersive mirror by spectral interferometry: comparison of different signal processing algorithms

We built a dispersive white-light spectral interferometer for precisely measuring the dispersion properties of a multilayer thin-film structure. A novel algorithm with improved robustness to measurement errors is presented by combining a windowed Fourier transformation with wavelet-based differentiation. Compared with previously published algorithms, this method shows substantial resistance to measurement errors. The group delay dispersion properties of bulk materials and a homemade chirped mirror are measured by our apparatus, and the measurement result manifests considerable accuracy and robustness. The technique shows reasonable potential for the characterization of ultrabroadband chirped mirrors.

Recent development and new ideas in the field of dispersive multilayer optics

A dispersive-mirror-based laser permits a dramatic simplification of high-power femtosecond and attosecond systems and affords promise for their further development toward shorter pulse durations, higher peak powers, and higher average powers with user-friendly systems. The result of the continuous development of dispersive mirrors permits pulse compression down to almost single cycle pulses of 3 fs duration. These design approaches together with the existing modern deposition technology pave the way for the manufacture of dielectric multilayer coatings able to compress pulses of tens of picoseconds duration down to a few femtoseconds.

Single-electron pulses for ultrafast diffraction

Visualization of atomic-scale structural motion by ultrafast electron diffraction and microscopy requires electron packets of shortest duration and highest coherence. We report on the generation and application of single-electron pulses for this purpose. Photoelectric emission from metal surfaces is studied with tunable ultraviolet pulses in the femtosecond regime. The bandwidth, efficiency, coherence, and electron pulse duration are investigated in dependence on excitation wavelength, intensity, and laser bandwidth. At photon energies close to the cathode's work function, the electron pulse duration shortens significantly and approaches a threshold that is determined by interplay of the optical pulse width and the acceleration field. An optimized choice of laser wavelength and bandwidth results in sub-100-fs electron pulses. We demonstrate single-electron diffraction from polycrystalline diamond films and reveal the favorable influences of matched photon energies on the coherence volume of single-electron wave packets. We discuss the consequences of our findings for the physics of the photoelectric effect and for applications of single-electron pulses in ultrafast 4D imaging of structural dynamics.

Pneumatic photonic crystals

We theoretically study a 1D elastic photonic crystal containing air voids as an opto-pneumatic medium. This medium is sensitive to weak deviations of the external pressure and, owing to its elasticity, can vary its geometry depending on the external conditions. We show that the reflectivity can be drastically changed at a chosen working frequency near the photonic band-gap edge or the reflection window. The resonance properties of such pneumatic photonic crystals made of glass, silicon, and mica with directly excited eigenmodes in the infrared region of frequencies are analyzed. The ways to determine small changes in the pressure on the micro- and nanobar scale are discussed.

Chirped-pulse amplification of laser pulses with dispersive mirrors

We report a novel implementation of chirped-pulse amplification (CPA) by dominantly using dispersive multilayer mirrors for chirp control. Our prototyp dispersive-mirror (DMC) compressor has been designed for a kHz Ti:sapphire amplifier and yielded--in a proof-of-concept study--millijoule-energy, sub-20-fs, 790-nm laser pulses with an overall throughput of approximately 90% and unprecedented spatio-temporal quality. Dispersive-mirror-based CPA permits a dramatic simplification of high-power lasers and affords promise for their advancement to shorter pulse durations, higher peak powers, and higher average powers with user-friendly systems.