Frequency-selective excitation of guided acoustic modes in a photonic crystal fiber

Brillouin Interaction between Two Optical Modes Selectively Excited in Weakly Guiding Multimode Optical Fibers

A multimode optical fiber supports excitation and propagation of a pure single optical mode, i.e., the field pattern that satisfies the boundary conditions and does not change along the fiber. When two counterpropagating pure optical modes are excited, they could interact through the stimulated Brillouin scattering (SBS) process. Here, we present a simple theoretical formalism describing SBS interaction between two individual optical modes selectively excited in an acoustically isotropic multimode optical fiber. Employing a weakly guiding step-index fiber approach, we have built an analytical expression for the spatial distribution of the sound field amplitude in the fiber core and explored the features of SBS gain spectra, describing the interaction between modes of different orders. In this way, we give a clear insight into the sound propagation effects accompanying SBS in multimode optical fibers, and demonstrate their specific contributions to the SBS gain spectrum.

High Resolution Brillouin Sensing of Micro-Scale Structures

Brillouin distributed measurement techniques have been extensively developed for structural health monitoring using fibre optic nerve systems. The recent advancement in the spatial resolution capabilities of correlation-based Brillouin distributed technique have reached the sub-mm regime, making this approach a suitable candidate for monitoring and characterizing integrated photonic devices. The small dimension associated with the short length of these devices—on the order of the cm- and mm-scale—requires high sensitivity detection techniques and sub-mm spatial resolution. In this paper, we provide an overview of the different Brillouin sensing techniques in various micro-scale structures such as photonic crystal fibres, microfibres, and on-chip waveguides. We show how Brillouin sensing is capable of detecting fine transverse geometrical features with the sensitivity of a few nm and also extremely small longitudinal features on the order of a few hundreds of μ m . We focus on the technique of Brillouin optical correlation domain analysis (BOCDA), which enables such high spatial resolution for mapping the opto-acoustic responses of micro-scale waveguides.

Plasmonic waveguide design for the enhanced forward stimulated brillouin scattering in diamond

We propose a scheme of metal/dielectric/metal waveguide for the enhanced forward stimulated Brillouin scattering (FSBS) in diamond that is mediated by gap surface plasmons. Numerical results based on finite-element method show that the maximum Brillouin gain in the small gap (~100 nm) can exceed 10⁶ W⁻¹ m⁻¹, which is three orders of magnitude higher than that in diamond-only waveguides. It is found that the radiation pressure that exists at the boundaries of metal and diamond plays a dominant role in contributing to the enhanced forward stimulated Brillouin gain, although electrostrictive forces interfere destructively. Detailed study shows that high FSBS gain can still be obtained regardless of the photoelastic property of the dielectric material in the proposed plasmonic waveguide. The strong photon-phonon coupling in this gap-surface-plasmon waveguide may make our design useful in the development of phonon laser, RF wave generation and optomechanical information processing in quantum system.

Surface Brillouin scattering in photonic crystal fibers

We report, to the best of our knowledge, the first experimental observation of surface Brillouin scattering in silica-based photonic crystal fibers, arising from the interaction between guided light and surface acoustic waves. This was achieved using small-core and high air-filling fraction microstructured fibers that enable a strong opto-acoustic coupling near the air holes while mitigating the acoustic leakages in the microstructured cladding. It is further shown that this new type of light scattering is highly sensitive to the fiber air-hole microstructure, thus providing a passive and efficient way to control it. Our observations are confirmed through numerical simulations of the elastodynamics equation.

Analysis of acousto-optic interaction based on forward stimulated Brillouin scattering in hybrid phononic-photonic waveguides

We present the generation of forward stimulated Brillouin scattering (FSBS) in hybrid phononic-photonic waveguides. To confine the optical and acoustic waves simultaneously, a hybrid waveguide is designed by embedding the silicon line defect in the silicon nitride phononic crystal slab. By taking into account three kinds hybrid waveguide, the appropriate structural parameters are obtained to enhance the acousto-optic interaction. We fabricate the honeycomb hybrid waveguide with a CMOS compatible technology. The forward Brillouin frequency shift is measured up to 2.425 GHz and the acoustic Q-factor of the corresponding acoustic mode is 1100. The influences of pump power, acoustic loss, nonlinear optical loss and lattice constant on the acousto-optic interaction in FSBS are analyzed and discussed. The proposed approach has important potential applications in on-chip all-optical signal processing.

Depolarized guided acoustic wave Brillouin scattering in hollow-core photonic crystal fibers

By performing quantum-noise-limited optical heterodyne detection, we observe polarization noise in light after propagation through a hollow-core photonic crystal fiber (PCF). We compare the noise spectrum to the one of a standard fiber and find an increase of noise even though the light is mainly transmitted in air in a hollow-core PCF. Combined with our simulation of the acoustic vibrational modes in the hollow-core PCF, we are offering an explanation for the polarization noise with a variation of guided acoustic wave Brillouin scattering (GAWBS). Here, instead of modulating the strain in the fiber core as in a solid core fiber, the acoustic vibrations in hollow-core PCF influence the effective refractive index by modulating the geometry of the photonic crystal structure. This induces polarization noise in the light guided by the photonic crystal structure.

Brillouin light scattering from surface acoustic waves in a subwavelength-diameter optical fibre

Brillouin scattering in optical fibres is a fundamental interaction between light and sound with important implications ranging from optical sensors to slow and fast light. In usual optical fibres, light both excites and feels shear and longitudinal bulk elastic waves, giving rise to forward-guided acoustic wave Brillouin scattering and backward-stimulated Brillouin scattering. In a subwavelength-diameter optical fibre, the situation changes dramatically, as we here report with the first experimental observation of Brillouin light scattering from surface acoustic waves. These Rayleigh-type surface waves travel the wire surface at a specific velocity of 3,400 m s⁻¹ and backscatter the light with a Doppler shift of about 6 GHz. As these acoustic resonances are sensitive to surface defects or features, surface acoustic wave Brillouin scattering opens new opportunities for various sensing applications, but also in other domains such as microwave photonics and nonlinear plasmonics.

In optical fibres, stimulated Brillouin scattering is a fundamental interaction where light generates bulk elastic waves and it is backward scattered by them. Here, Beugnot et al. demonstrate the generation of backward-propagating surface acoustic wave Brillouin scattering in subwavelength-diameter optical fibres.

Reduction and control of stimulated Brillouin scattering in polymer-coated chalcogenide optical microwires

We investigate the onset of nonlinear effects in hybrid polymer-chalcogenide optical microwires and show that they provide an enhanced Kerr nonlinearity while simultaneously mitigating stimulated Brillouin scattering as compared to both chalcogenide and silica optical fibers. It is shown in particular that the polymer cladding surrounding the microwire significantly broadens the Brillouin linewidth and increases the threshold, thus enabling Kerr nonlinear applications. We also study the influence of the wire diameter on the Brillouin dynamics and demonstrate that the Brillouin frequency shift can be finely tuned over a wide radio-frequency range.

Observation of acoustically induced modulation instability in a Brillouin photonic crystal fiber laser

We report the experimental observation of self-induced modulation instability (MI) in a Brillouin fiber laser made with a solid-core photonic crystal fiber (PCF) with strong anomalous dispersion. We identify this MI as the result of parametric amplification of optical sidebands generated by guided acoustic modes within the core of the PCF. It is further shown that MI leads to passive harmonic mode locking and to the generation of a picosecond pulse train at a repetition rate of 1.15 GHz which matches the acoustic frequency of the fundamental acoustic mode of the PCF.

Temperature coefficient of the high-frequency guided acoustic mode in a photonic crystal fiber

High-frequency guided acoustic Brillouin modes have recently been observed in small-core silica photonic crystal fibers. In this paper, we investigate the temperature dependence of the optical sideband frequency generated by one of these guided acoustic waves. The experimental results show a temperature coefficient of 100 kHz/°C at an acoustic resonance frequency of 1.15 GHz and are in very good agreement with the theoretical predictions. This coefficient demonstrates a temperature sensitivity 10 times larger than that previously reported in conventional single-mode fibers, which is promising in view of potential applications to optical fiber sensors.