Hitless wavelength-selective switch based on quantum well second-order series-coupled microring resonators

Time-Resolved Stark Spectroscopy in CdSe Nanoplatelets: Exciton Binding Energy, Polarizability, and Field-Dependent Radiative Rates

We present a study of the application potential of CdSe nanoplatelets (NPLs), a model system for colloidal 2D materials, as field-controlled emitters. We demonstrate that their emission can be changed by 28% upon application of electrical fields up to 175 kV/cm, a very high modulation depth for field-controlled nanoemitters. From our experimental results we estimate the exciton binding energy in 5.5 monolayer CdSe nanoplatelets to be E_B = 170 meV; hence CdSe NPLs exhibit highly robust excitons which are stable even at room temperature. This opens up the possibility to tune the emission and recombination dynamics efficiently by external fields. Our analysis further allows a quantitative discrimination of spectral changes of the emission energy and changes in PL intensity related to broadening of the emission line width as well as changes in the intrinsic radiative rates which are directly connected to the measured changes in the PL decay dynamics. With the developed field-dependent population model treating all occurring field-dependent effects in a global analysis, we are able to quantify, e.g., the ground state exciton transition dipole moment (3.0 × 10^-29 Cm) and its polarizability, which determine the radiative rate, as well as the (static) exciton polarizability (8.6 × 10^-8 eV cm²/kV²), all in good agreement with theory. Our results show that an efficient field control over the exciton recombination dynamics, emission line width, and emission energy in these nanoparticles is feasible and opens up application potential as field-controlled emitters.

Electroabsorption by 0D, 1D, and 2D nanocrystals: a comparative study of CdSe colloidal quantum dots, nanorods, and nanoplatelets

This work presents a comprehensive study of electroabsorption in CdSe colloidal quantum dots, nanorods, and nanoplatelets. We experimentally demonstrate that the exposure of the nanoplatelets to a dc electric field leads to strong broadening of their lowest-energy heavy-hole absorption band and drastically reduces the absorption efficiency within the band. These are results of the quantum-confined Stark and Franz–Keldysh effects. The field-induced change in the nanoplatelets’ absorption is found to be more than 10 times the change in the absorption by the quantum dots. We also demonstrate that the electroabsorption by the nanorods is weaker than that by the quantum dots and nanoplatelets and reveal an unusual dependence of the differential absorption changes on the nanoplatelet thickness: the thicker the nanoplatelet, the smaller the change.

A tunable notch filter using microelectromechanical microring with gap-variable busline coupler

A microelectromechanical tunable notch filter using silicon-photonic freestanding waveguides is proposed, and the basic characteristics are experimentally investigated. The proposed filter is composed of a wavelength-tunable silicon microring resonator and a busline switch. The tunable microring consists of freestanding single-mode waveguides and air-gap directional waveguide couplers. The optical path length of the microring is varied physically by a displacement of electrostatic comb-drive actuator. The busline switch consists of a gap-variable waveguide coupling mechanism, which enables coupling the tunable microring with the busline by another electrostatic comb-drive actuator. During the wavelength tuning of microring, the busline can be disconnected from the microring. Therefore, the proposed device operates as a hitless wavelength-selective switch if they are connected in series. The waveguides are 320 nm in width and 340 nm in thickness. The resonant wavelength shift of the microring is 9.96 nm at the voltage of 26 V with the actuator displacement of 1.0 μm. The coupling to busline is adjusted from the switch-off state at the gap of 600 nm to the switch-on state corresponding to the critical coupling condition at the gap of 383 nm. The whole size of the wavelength-tunable filter with hitless mechanism is about 150 μm by 80 μm. Due to the capacitive operation of the comb-drive actuators, the power consumption is negligibly small.

Hitless wavelength-selective switch with quadruple series-coupled microring resonators using multiple-quantum-well waveguides

We demonstrate a hitless wavelength-selective switch (WSS) based on InGaAs/InAlAs five-layer asymmetric coupled quantum well (FACQW) quadruple series-coupled microring resonators. The WSS is driven by the electric-field-induced change in refractive index in the FACQW core layer caused by the quantum-confined Stark effect (QCSE) for high-speed operation. The WSS with high-mesa waveguides is fabricated on a molecular beam epitaxy-grown wafer by dry etching. The fabricated WSS consists of four microrings, each with a round-trip length of 350 μm and five directional couplers with shallow grooves. A boxlike spectral response and hitless switching with higher extinction ratios than a double series-coupled microring resonator are successfully demonstrated. In addition, we propose the improvement of switching characteristics by controlling the coupling efficiencies at the directional couplers.

Opto-VLSI-based N × M wavelength selective switch

In this paper, we propose and experimentally demonstrate a novel N × M wavelength selective switch (WSS) architecture based on the use of an Opto-VLSI processor. Through a two-stage beamsteering process, wavelength channels from any input optical fiber port can be switched into any output optical fiber port. A proof-of-concept 2 × 3 WSS structure is developed, demonstrating flexible wavelength selective switching with an insertion loss around 15 dB.