Hypocycloid-shaped hollow-core photonic crystal fiber Part I: arc curvature effect on confinement loss

Design and optimization of GI-PCF supporting the orbital angular momentum modes based on negative curvature structure

Based on the negative curvature structure, we design a graded-index photonic crystal fiber (GI-PCF) supporting the orbital angular momentum (OAM) mode transmission and discuss its optimization strategy. The core of the designed GI-PCF is sandwiched by three-layer inner air-hole arrays with gradually decreasing air-hole radii and a single outer air-hole array, where the inner side of the annular core forms a graded refractive index distribution. All these structures are clad with negative-curvature tubes. By optimizing characteristic structural parameters, including the air-filling fraction of the outer array, the air-hole radii of the inner arrays, and the thickness of the tubes, the GI-PCF can support 42 OAM modes and most of them have a purity greater than 85%. Compared with conventional structures, the present design of GI-PCF has better properties on an overall level, which can stably transmit multiple OAM modes with high mode purity. These results inject new interest in the flexible design of PCF and have potential applications in various fields, including but not limited to the mode division multiplexing system and terabit data transmission.

Surface Plasmon Resonance-Based Gold-Coated Hollow-Core Negative Curvature Optical Fiber Sensor

The hollow-core fiber-based sensor has garnered high interest due to its simple structure and low transmission loss. A new hollow-core negative-curvature fiber (HC-NCF) sensor based on the surface plasmon resonance (SPR) technique is proposed in this work. The cladding region is composed of six circular silica tubes and two elliptical silica tubes to reduce fabrication complexity. Chemically stable gold is used as a plasmonic material on the inner wall of the sensor structure to induce the SPR effect. The proposed sensor detects a minor variation in the refractive indices (RIs) of the analyte placed in the hollow core. Numerical investigations are carried out using the finite element method (FEM). Through the optimization of structural parameters, the maximum wavelength sensitivity of 6000 nm/RIU and the highest resolution of 2.5 × 10^-5 RIU are achieved in the RI range of 1.31 to 1.36. In addition, an improved figure of merit (FOM) of 2000 RIU^-1 for Y-polarization and 857.1 RIU^-1 for X-polarization is obtained. Because of its simple structure, high sensitivity, high FOM, and low transmission loss, the proposed sensor can be used as a temperature sensor, a chemical sensor, and a biosensor.

Optimization method for low-loss single-mode bending negative curvature anti-resonant hollow-core fiber designed by mode modification

A method of designing negative curvature anti-resonant hollow-core fibers (NC-AR-HCFs) with bending resistance is proposed, by which the fundamental mode (FM) and higher-order mode (HOM) can be adjusted. An asymmetric double-ring negative curvature hollow-core fiber (ADR-NC-HCF) is proposed to verify the method. The ADR-NC-HCF achieves the FM loss of 0.8 dB/km at 1550 nm under the bending radius of 20 mm. The coupling relation between the modes in ADR-NC-HCFs is analyzed revealing the physical principle of the design method. Based on the principle, the fiber can be directionally optimized to achieve a lower loss of the FM or higher-order mode extinction ratio.

Preparation of Biocompatible Poly(2-(methacryloyloxy)ethyl phosphorylcholine) Hollow Particles Using Silica Particles as a Template

Hydrophilic poly(2-(methacryloyloxy)ethyl phosphorylcholine) (PMPC) shows biocompatibility because the pendant phosphorylcholine group has the same chemical structure as the hydrophilic part of phospholipids that form cell membranes. Hollow particles can be used in various fields, such as a carrier in drug delivery systems because they can encapsulate hydrophilic drugs. In this study, vinyl group-decorated silica particles with a radius of 150 nm were covered with cross-linked PMPC based on the graft-through method. The radius of PMPC-coated silica particles increased compared to that of the original silica particles. The PMPC-coated silica particles were immersed in a hydrogen fluoride aqueous solution to remove template silica particles to prepare the hollow particles. The PMPC hollow particles were characterized by dynamic light scattering, infrared spectroscopy, thermogravimetric analysis, and transmission electron microscopy observations. The thickness of the hollow particle shell can be controlled by the polymerization solvent quality. When a poor solvent for PMPC was used for the polymerization, PMPC hollow particles with thick shells can be obtained. The PMPC hollow particles can encapsulate hydrophilic guest molecules by immersing the hollow particles in a high-concentration guest molecule solution. The biocompatible PMPC hollow particles can be used in a drug carrier.

Integration of an anti-resonant hollow-core fiber with a multimode Yb-doped fiber for high power near-diffraction-limited laser operation

We proposed and demonstrated mode cleaning in a high-power fiber laser by integrating an anti-resonant hollow-core fiber (AR-HCF) into a multimode laser cavity of an ytterbium (Yb)-doped fiber (YDF). An in-house mode-matched AR-HCF was fusion-spliced to a commercial multimode LMA-YDF, ensuring efficient fundamental mode coupling. The AR-HCF inflicts a high propagation loss selectively on higher-order modes, facilitating fundamental mode operation. Thus, the AR-HCF works as an efficient spatial mode filter embedded in the multimode fiber laser cavity and reinforces preferential amplification of the fundamental mode. Beam quality factor enhancement was achieved from M² = 2.09 to 1.39 at an output power of 57.7 W (pump-power limited). The beam quality can be further improved by refining the AR-HCF fabrication. The proposed technique has a great potential to be exploited in other multimode fiber laser cavities involving erbium- or thulium-doped fibers and obviates the need for complicated specialty active fiber designs. Compared with the commonly used fiber bending technique, our method can achieve an efficient higher-order mode suppression without inducing mode-field deterioration.

Gas fiber lasers may represent a breakthrough in creating powerful radiation sources in the mid-IR

Continuous wave fiber laser created on the basis of silica glass negative curvature hollow core fiber filled with HBr make it possible to obtain efficient narrow linewidth mid-IR emission with a maximum laser power of about 500 mW at wavelength of 4200 nm. It is for the first time that emission from a continuous wave fiber laser have been achieved at a wavelength of 4496 nm with the largest tuning range of 686 nm.

Confinement loss of anti-resonant capillaries with curved boundaries

A systematic analysis of the dependence of the confinement loss of an anti-resonant capillary on the curvature of the core surround is presented. The core boundary is described by circular arcs and the construction allows for a wide range of core shapes to be considered. It is found that both negative and positive curvatures substantially reduce the confinement loss relative to that of a circular anti-resonant capillary and that this effect is insensitive to the size of the core relative to the wavelength and to the properties of the glass capillary wall. In contrast, for a solid core surround there is a small increase in the confinement loss with curvature. Results of scalar and vector calculations are shown to be similar. A qualitative explanation of the results is proposed based on azimuthal confinement of the wave fields generated by the curved boundaries.

Recent Advancement of Anti-Resonant Hollow-Core Fibers for Sensing Applications

Specialty fibers have enabled a wide range of sensing applications. Particularly, with the recent advancement of anti-resonant effects, specialty fibers with hollow structures offer a unique sensing platform to achieve highly accurate and ultra-compact fiber optic sensors with large measurement ranges. This review presents an overview of recent progress in anti-resonant hollow-core fibers for sensing applications. Both regular and irregular-shaped fibers and their performance in various sensing scenarios are summarized. Finally, the challenges and possible solutions are briefly presented with some perspectives toward the future development of anti-resonant hollow-core fibers for advanced sensing.

Impact of cladding elements on the loss performance of hollow-core anti-resonant fibers

Understanding the impact of the cladding tube structure on the overall guiding performance is crucial for designing a single-mode, wide-band, and ultra low-loss nested hollow-core anti-resonant fiber (HC-ARF). Here we thoroughly investigate on how the propagation loss is affected by the nested elements when their geometry is realistic (i.e., non-ideal). Interestingly, it was found that the size, rather than the shape, of the nested elements has a dominant role in the final loss performance of the regular nested HC-ARFs. We identify a unique 'V-shape' pattern for suppression of higher-order modes loss by optimizing free design parameters of the HC-ARF. We find that a 5-tube nested HC-ARF has wider transmission window and better single-mode operation than a 6-tube HC-ARF. We show that the propagation loss can be significantly improved by using anisotropic nested anti-resonant tubes elongated in the radial direction. Our simulations indicate that with this novel fiber design, a propagation loss as low as 0.11 dB/km at 1.55 μm can be achieved. Our results provide design insight toward fully exploiting a single-mode, wide-band, and ultra low-loss HC-ARF. In addition, the extraordinary optical properties of the proposed fiber can be beneficial for several applications such as future optical communication system, high energy light transport, extreme non-nonlinear optics and beyond.

Contaminant-free end-capped and single-mode acetylene photonic microcell for sub-Doppler spectroscopy

We report on the development of an acetylene-filled photonic microcell based on an assembly process that is contaminant free and requires no helium buffer gas nor gluing procedure. The microcell consists of a 7-m-long and 30 µm core-diameter inhibited-coupling guiding hollow-core photonic crystal fiber filled with acetylene gas at a pressure in the range of 80 µbar, sealed by capping its ends with fusion-collapsing a glass-tube sleeve, and mounted on FC connectors for integration. The microcell shows a robust single-mode behavior and a total insertion loss of ∼1.5dB. The spectroscopic merit of the formed microcell is tested by generating electromagnetic induced transparency and saturated absorption on R13 and P9 absorption lines, respectively. The sub-Doppler transparencies show a close to transit time limited linewidth of 17±3MHz. The latter was monitored for over 3 months. As a demonstration, the microcell was used to frequency stabilize a laser with fractional frequency instability improvement by a factor 50 at 100 s integration time compared to free running laser operation.

Analyzing mode index mismatch and field overlap for light guidance in negative-curvature fibers

We numerically investigate the role of cladding geometries in two widely used anti-resonant hollow-core fiber designs with negative curvatures, the tubular negative-curvature fiber and ice-cream-cone negative-curvature fiber. The confinement loss governed by the inhibited coupling between the modes in the core and cladding is thoroughly examined systematically against the core-cladding curvature for both types. We show that, in addition to the mode-index mismatch, the mode-field overlap also plays a key role in determining the loss. Simultaneously, we find the ice-cream-cone negative-curvature fiber can exhibit better loss performance than the tubular design within a specific range of the curvature. This enhancement is achieved without sacrificing the transmission bandwidth and is relatively robust against the fabrication error.

Quantitative analysis of anti-resonance in single-ring, hollow-core fibres

The dependence of the confinement loss of unjacketed and jacketed single-ring fibres on structural parameters and the wavelength is analysed with reference to an anti-resonant model for which an analytic expression for the loss is available. Provided leakage through the gaps between the cladding capillaries is suppressed, the loss of unjacketed structures follows the prediction of the analytic model closely in terms of the scaling with respect to the radius and glass thickness of the capillaries, and the ratio of the wavelength to the core radius. The absolute value of the confinement loss and its dependence on the dielectric constant differ significantly from the analytic model; these differences are discussed in terms of the negative curvature of the core-cladding boundary. The loss of jacketed structures does not follow the anti-resonant model as closely, but there is sufficient similarity to conclude that anti-resonance in the glass and air regions of the cladding is key to understanding the guidance mechanism.

Double negative curvature anti-resonance hollow core fiber

We report on a double negative curvature anti-resonance hollow core fiber, in which, the cladding is constituted of 6 large tubes and 6 small tubes arranged in a staggered pattern. The simulation shows that the loss of the fiber can reach or even exceed the loss of double-clad negative curvature anti-resonance hollow core fibers in short wavelength band, due to the staggered arrangement of two kind of tubes and the double negative curvature on the core boundary. The best single mode performance with a loss ratio as high as 100,000 between LP₁₁ mode and LP₀₁ mode is obtained due to simultaneously inhibited LP₁₁ modes and LP₂₁ modes in the fiber structure. The reason for loss oscillations in long wavelength band and the fabrication feasibility of proposed fiber are also discussed.

Transporting Long-Lived Quantum Spin Coherence in a Photonic Crystal Fiber

Confining particles in hollow-core photonic crystal fibers has opened up new prospects to scale up the distance and time over which particles can be made to interact with light. However, maintaining long-lived quantum spin coherence and/or transporting it over macroscopic distances in a waveguide remain challenging. Here, we demonstrate coherent guiding of ground-state superpositions of ^{85}Rb atoms over a centimeter range and hundreds of milliseconds inside a hollow-core photonic crystal fiber. The decoherence is mainly due to dephasing from the residual differential light shift from the optical trap and the inhomogeneity of an ambient magnetic field. Our experiment establishes an important step towards a versatile platform that can lead to applications in quantum information networks and a matter wave circuit for quantum sensing.

Ultrashort pulse Kagome hollow-core photonic crystal fiber delivery for nonlinear optical imaging

We report ultrashort pulse delivery through a hypocycloid-core inhibited-coupling Kagome hollow-core photonic crystal fiber (HC-PCF). Undistorted 10 fs and 6.6 nJ pulses were launched through 1 m long fiber without fiber dispersion pre-compensation and 80% efficiency. The performance of this technology for biomedical imaging is demonstrated on a biological sample by incorporating the fiber into a two-photon excited fluorescence (TPEF) laser scanning microscope (LSM) achieving a pulse width of 15 fs at the sample location. To the best of our knowledge, this is the first report on undistorted TPEF imaging in a LSM with 15 fs pulses delivered through a 1 m long Kagome HC-PCF with high throughput.

Active engineering of four-wave mixing spectral correlations in multiband hollow-core fibers

We demonstrate theoretically and experimentally a high level of control of the four-wave mixing process in an inert gas-filled inhibited-coupling guiding hollow-core photonic crystal fiber. The specific multiple-branch dispersion profile in such fibers allows both correlated and separable bi-photon states to be produced. By controlling the choice of gas and its pressure and the fiber length, we experimentally generate various joint spectral intensity profiles in a stimulated regime that is transferable to the spontaneous regime. The generated profiles may cover both spectrally separable and correlated bi-photon states and feature frequency tuning over tens of THz, demonstrating a large dynamic control that will be very useful when implemented in the spontaneous regime as a photon pair source.

Hollow-Core Fiber Technology: The Rising of “Gas Photonics”

Since their inception, about 20 years ago, hollow-core photonic crystal fiber and its gas-filled form are now establishing themselves both as a platform in advancing our knowledge on how light is confined and guided in microstructured dielectric optical waveguides, and a remarkable enabler in a large and diverse range of fields. The latter spans from nonlinear and coherent optics, atom optics and laser metrology, quantum information to high optical field physics and plasma physics. Here, we give a historical account of the major seminal works, we review the physics principles underlying the different optical guidance mechanisms that have emerged and how they have been used as design tools to set the current state-of-the-art in the transmission performance of such fibers. In a second part of this review, we give a nonexhaustive, yet representative, list of the different applications where gas-filled hollow-core photonic crystal fiber played a transformative role, and how the achieved results are leading to the emergence of a new field, which could be coined “Gas photonics”. We particularly stress on the synergetic interplay between glass, gas, and light in founding this new fiber science and technology.

Single-mode, low loss hollow-core anti-resonant fiber designs

In this paper, we numerically investigate various hollow-core anti-resonant (HC-AR) fibers towards low propagation and bend loss with effectively single-mode operation in the telecommunications window. We demonstrate how the propagation loss and higher-order mode modal contents are strongly influenced by the geometrical structure and the number of the anti-resonant cladding tubes. We found that 5-tube nested HC-AR fiber has a wider anti-resonant band, lower loss, and larger higher-order mode extinction ratio than designs with 6 or more anti-resonant tubes. A loss ratio between the higher-order modes and fundamental mode, as high as 12,000, is obtained in a 5-tube nested HC-AR fiber. To the best of our knowledge, this is the largest higher-order mode extinction ratio demonstrated in a hollow-core fiber at 1.55 μm. In addition, we propose a modified 5-tube nested HC-AR fiber, with propagation loss below 1 dB/km from 1330 to 1660 nm. This fiber also has a small bend loss of ~15 dB/km for a bend radius of 1 cm.

Mid IR hollow core fiber gas laser emitting at 4.6 μm

Emission at 4.6 μm was observed from an N₂O filled hollow core fiber laser. 8-ns pump pulses at 1.517 μm excited a vibrational overtone resulting in lasing on an R and P branch fundamental transition from the upper pump state. At optimum gas pressure of 80 Torr, photon conversion efficiency of 9% and slope efficiency of 3% were observed from a mirrorless laser. The laser threshold occurred at absorbed pump energy of 150 nJ in a 45-cm long fiber with 85 μm core diameter. The observed dependence of the laser output on gas pressure was shown to be a result of line broadening and relaxation rates.

Hollow Core Optical Fibers for Industrial Ultra Short Pulse Laser Beam Delivery Applications

Hollow core fibers were introduced many years ago but are now starting to be used regularly in more demanding applications. While first experiments mainly focused on the characterization and analysis of the fibers themselves, they are now implemented as a tool in the laser beam delivery. Owing to their different designs and implementations, different tasks can be achieved, such as flexible beam delivery, wide spectral broadening up to supercontinuum generation or intense gas-laser interaction over long distances. To achieve a constant result in these applications under varying conditions, many parameters of these fibers have to be controlled precisely during fabrication and implementation. A wide variety of hollow core fiber designs have been analyzed and implemented into a high-power industrial beam delivery and their performance has been measured.

Geometry of Chalcogenide Negative Curvature Fibers for CO2 Laser Transmission

We study the impact of geometry on leakage loss in negative curvature fibers made with As 2 Se 3 chalcogenide and As 2 S 3 chalcogenide glasses for carbon dioxide (CO 2 ) laser transmission. The minimum leakage loss decreases when the core diameter increases both for fibers with six and for fibers with eight cladding tubes. The optimum gap corresponding to the minimum loss increases when the core diameter increases for negative curvature fibers with six cladding tubes. For negative curvature fibers with eight cladding tubes, the optimum gap is always less than 20 μ m when the core diameter ranges from 300 μ m to 500 μ m. The influence of material loss on fiber loss is also studied. When material loss exceeds 10 2 dB/m, it dominates the fiber leakage loss for negative curvature fiber at a wavelength of 10.6 μ m.

Nonlinear dynamic of picosecond pulse propagation in atmospheric air-filled hollow core fibers

Atmospheric air-filled hollow core (HC) fibers, representing the simplest yet reliable form of gas-filled hollow core fiber, show remarkable nonlinear properties and have several interesting applications such as pulse compression, frequency conversion and supercontinuum generation. Although the propagation of sub-picosecond and few hundred picosecond pulses are well-studied in air-filled fibers, the nonlinear response of air to pulses with a duration of a few picoseconds has interesting features that have not yet been explored fully. Here, we experimentally and theoretically study the nonlinear propagation of ~6 ps pulses in three different types of atmospheric air-filled HC fiber. With this pulse length, we were able to explore different nonlinear characteristics of air at different power levels. Using in-house-fabricated, state-of-the-art HC photonic bandgap, HC tubular and HC Kagomé fibers, we were able to associate the origin of the initial pulse broadening process in these fibers to rotational Raman scattering (RRS) at low power levels. Due to the broadband and low loss transmission window of the HC Kagomé fiber we used, we observed the transition from initial pulse broadening (by RRS) at lower powers, through long-range frequency conversion (2330 cm^-1) with the help of vibrational Raman scattering, to broadband (~700 nm) supercontinuum generation at high power levels. To model such a wide range of nonlinear processes in a unified approach, we have implemented a semi-quantum model for air into the generalized nonlinear Schrodinger equation, which surpasses the limits of the common single damping oscillator model in this pulse length regime. The model has been validated by comparison with experimental results and provides a powerful tool for the design, modeling and optimization of nonlinear processes in air-filled HC fibers.

Optimized inhibited-coupling Kagome fibers at Yb-Nd:Yag (8.5 dB/km) and Ti:Sa (30 dB/km) ranges

We report on the development of hypocycloid core-contour inhibited-coupling (IC) Kagome hollow-core photonic crystal fibers (HC-PCFs) with record transmission loss and spectral coverage that include the common industrial laser wavelengths. Using the scaling of the confinement loss with the core-contour negative curvature and the silica strut thickness, we fabricated an IC Kagome HC-PCF for Yb and Nd:Yag laser guidance with record loss level of 8.5 dB/km associated with a 225-nm-wide 3-dB bandwidth. A second HC-PCF is fabricated with reduced silica strut thickness while keeping the hypocycloid core contour. It exhibits a fundamental transmission window spanning down to the Ti:Sa spectral range and a loss figure of 30 dB/km at 750 nm. The fibers' modal properties and bending sensitivity show these HC-PCFs to be ideal for ultralow-loss, flexible, and robust laser beam delivery.

An atom interferometer inside a hollow-core photonic crystal fiber

Coherent interactions between electromagnetic and matter waves lie at the heart of quantum science and technology. However, the diffraction nature of light has limited the scalability of many atom-light-based quantum systems. We use the optical fields in a hollow-core photonic crystal fiber to spatially split, reflect, and recombine a coherent superposition state of free-falling ⁸⁵Rb atoms to realize an inertia-sensitive atom interferometer. The interferometer operates over a diffraction-free distance, and the contrasts and phase shifts at different distances agree within one standard error. The integration of phase coherent photonic and quantum systems here shows great promise to advance the capability of atom interferometers in the field of precision measurement and quantum sensing with miniature design of apparatus and high efficiency of laser power consumption.

Inhibited coupling guiding hollow fibers for label-free DNA detection

The potentialities in using hollow core tube lattice fibers based on inhibited coupling wave-guiding for label-free DNA detection are numerically investigated and discussed here. The proposed sensing approach does not require any additional transducer component such as Bragg gratings, amplifying techniques such as nanoparticles nor coherent sources. It simply consists of the measurement of the transmittance of a piece of fiber some ten centimeters long. In case of matching DNA sequence, an additional bio-layer is laid down the dielectric-air interface causing a red shift of the transmission spectrum of the fiber. Results show a spectral sensitivity on the bio-layer with shift as high as 42 nm for every 10 nm of bio-layer and robustness against imperfect fiber coupling. The proposed approach can be easily applied to sensing of other complex molecular structures where the presence/absence of analyte can generate or not an additional layer.

Spectral-temporal dynamics of high power Raman picosecond pulse using H2-filled Kagome HC-PCF

We report on the spectral-temporal characterization of a 1.8 μm wavelength and high power picosecond pulse Raman source. It is generated via frequency conversion to the first-order Stokes of a 27 ps chirped pulse Yb-doped fiber laser inside a molecular hydrogen-filled Kagome hollow-core photonic crystal fiber (HC-PCF). Depending on the average power and chirp of the pump laser, the average power of this Raman source can be as high as 9.3 W, and its pulse duration can be as short as ∼17  ps. In agreement with stimulated Raman scattering under the very high gain transient regime, the experimental results show the Stokes spectral structure to change following a three-stage sequence when the average pump power is increased. For a pump with a chirp corresponding to a bandwidth of 200 GHz, we found that for a pump power lower than 7 W, the Stokes spectrum is generated from the blue side of the pump spectrum, and then it exhibits a spectral replica of the pump spectrum for 7-14 W pump power range. Finally,the Stokes spectrum is chiefly generated from the red side of the pump spectrum when the pump power is further increased. Conversely, the Stokes pulse temporal profile shows a strong dependence with the pump power. For a low pump power range, the Stokes pulse exhibits a single peak with a full width at half-maximum of ∼17  ps. For higher pump powers, the Stokes pulse presents a double-peak structure with each peak having a duration of less than 15 ps. The present results can be used to develop compact and efficient frequency down-convertors to the increasingly widespread Yb-based picosecond lasers.

Attenuation of model hollow-core, anti-resonant fibres

An analytic expression is obtained for the confinement loss of model anti-resonant fibres consisting of concentric regions of air and glass. Hankel functions in the regions surrounding the air core are approximated by their asymptotic form; apart from this, results are correct to leading order in the small parameter 1/(k₀rc), where rc is the core radius and k₀ the free space wavenumber. The results extend and generalise previous solutions for propagation in a hollow glass tube and a thin-walled capillary. Comparison with exact numerical calculations shows that the analytic expression provides an accurate description of the loss, including its dependence on the mode, the core radius and the widths of the surrounding glass and air regions. The relevance of the results to the recent generation of hollow-core, anti-resonant photonic crystal fibres is discussed.

Low-loss Kagome hollow-core fibers operating from the near- to the mid-IR

We report the fabrication and characterization of Kagome hollow-core antiresonant fibers, which combine low attenuation (as measured at ∼30  cm bend diameter) with a wide operating bandwidth and high modal purity. Record low attenuation values are reported: 12.3 dB/km, 13.9 dB/km, and 9.6 dB/km in three different fibers optimized for operation at 1 μm, 1.55 μm, and 2.5 μm, respectively. These fibers are excellent candidates for ultra-high power delivery at key laser wavelengths including 1.064 μm and 2.94 μm, as well as for applications in gas-based sensing and nonlinear optics.

Near diffraction-limited performance of an OPA pumped acetylene-filled hollow-core fiber laser in the mid-IR

We investigate the mid-IR laser beam characteristics from an acetylene-filled hollow-core optical fiber gas laser (HOFGLAS) system. The laser exhibits near-diffraction limited beam quality in the 3 μm region with M² = 1.15 ± 0.02 measured at high pulse energy, and the highest mid-IR pulse energy from a HOFGLAS system of 1.4 μJ is reported. Furthermore, the effects of output saturation with pump pulse energy are reduced through the use of longer fibers with low loss. Finally, the slope efficiency is shown to be nearly independent of gas pressure over a wide range, which is encouraging for further output power increase.

Hollow polymer particles: a review

Herein, the basic principles, such as the definitions, classifications, and properties, of hollow polymer particles (HPPs) are critically investigated.

Fusion splice between tapered inhibited coupling hypocycloid-core Kagome fiber and SMF

We report for the first time on tapering inhibited coupling (IC) hypocycloid-core shape Kagome hollow-core photonic crystal fibers whilst maintaining their delicate core-contour negative curvature with a down-ratio as large as 2.4. The transmission loss of down-tapered sections reaches a figure as low as 0.07 dB at 1550 nm. The tapered IC fibers are also spliced to standard SMF with a total insertion loss of 0.48 dB. These results show that all-fiber photonic microcells with the ultra-low loss hypocycloid core-contour Kagome fibers is now possible.

Bending loss characterization in nodeless hollow-core anti-resonant fiber

We report high performance nodeless hollow-core anti-resonant fibers (HARFs) with broadband guidance from 850 nm to >1700 nm and transmission attenuation of ~100 dB/km. We systematically investigate their bending loss behaviors using both theoretical and experimental approaches. While a low bending loss value of 0.2 dB/m at 5 cm bending radius is attained in the long wavelength side (LWS) of the spectrum, in this paper, we pursue light guidance in the short wavelength side (SWS) under tight bending, which is yet to be explored. We analytically predict and experimentally verify a sub transmission band in the SWS with a broad bandwidth of 110 THz and an acceptable loss of 4.5 dB/m at 2 cm bending radius, indicating that light can be simultaneously guided in LWS and SWS even under tight bending condition. This provides an unprecedented degree of freedom to tailor the transmission spectrum under a tight bending state and opens new opportunities for HARFs to march into practical applications where broadband guidance under small bending radius is a prerequisite.

Empirical formulas for calculating loss in hollow core tube lattice fibers

In this paper scaling laws governing loss in hollow core tube lattice fibers are numerically investigated and discussed. Moreover, by starting from the analysis of the obtained numerical results, empirical formulas for the estimation of the minimum values of confinement loss, absorption loss, and surface scattering loss inside the transmission band are obtained. The proposed formulas show a good accuracy for fibers designed for applications ranging from THz to ultra violet band.

Low-loss single-mode hollow-core fiber with anisotropic anti-resonant elements

A hollow-core fiber using anisotropic anti-resonant tubes in the cladding is proposed for low loss and effectively single-mode guidance. We show that the loss performance and higher-order mode suppression is significantly improved by using symmetrically distributed anisotropic anti-resonant tubes in the cladding, elongated in the radial direction, when compared to using isotropic, i.e. circular, anti-resonant tubes. The effective single-mode guidance of the proposed fiber is achieved by enhancing the coupling between the cladding modes and higher-order-core modes by suitably engineering the anisotropic anti-resonant elements. With a silica-based fiber design aimed at 1.06 µm, we show that the loss extinction ratio between the higher-order core modes and the fundamental core mode can be more than 1000 in the range 1.0-1.65 µm, while the leakage loss of the fundamental core mode is below 15 dB/km in the same range.

Hollow core anti-resonant fiber with split cladding

An improved design for hollow core anti-resonant fibers (HAFs) is presented. A split cladding structure is introduced to reduce the fabrication distortion within design tolerance. We use numerical simulations to compare the Kagome fibers (KFs) and the proposed split cladding fibers (SCFs) over two normalized transmission bands. It reveals that SCFs are able to maintain the desired round shape of silica cladding walls, hence improving the confinement loss (CL) compared to the KF and is comparable to that of the nested antiresonant nodeless fiber (NANF) with the same core size. In addition, the SCF allows stacking multiple layers of cladding rings to control the CL. The influences of the number of cladding layers and the cladding gap width on the CL of the SCFs have been studied. SCF with three cladding rings is fabricated by the stack-and-draw technique. A measured attenuation spectrum matches well with the calculation prediction. The measured near field mode patterns also prove the feasibility of our fiber design.

Higher-order mode suppression in chalcogenide negative curvature fibers

We find conditions for suppression of higher-order core modes in chalcogenide negative curvature fibers with an air core. An avoided crossing between the higher-order core modes and the fundamental modes in the tubes surrounding the core can be used to resonantly couple these modes, so that the higher-order core modes become lossy. In the parameter range of the avoided crossing, the higher-order core modes become hybrid modes that reside partly in the core and partly in the tubes. The loss ratio of the higher-order core modes to the fundamental core mode can be more than 50, while the leakage loss of the fundamental core mode is under 0.4 dB/m. We show that this loss ratio is almost unchanged when the core diameter changes and so will remain large in the presence of fluctuations that are due to the fiber drawing process.

Over-five octaves wide Raman combs in high-power picosecond-laser pumped H(2)-filled inhibited coupling Kagome fiber

We report on the generation of over 5 octaves wide Raman combs using inhibited coupling Kagome guiding hollow-core photonic crystal fiber filled with hydrogen and pumped with 22.7 W average power and 27 picosecond pulsed fiber laser. Combs spanning from ~321 nm in the UV to ~12.5 µm in the long-wavelength IR (i.e. from 24 THz to 933 THz) with different spectral content and with an output average power of up to ~10 W were generated. In addition to the clear potential of such a comb as a laser source emitting at spectral ranges, which existing technology poorly addresses like long-wavelength IR and UV, the combination of high Raman net gain and short pump-pulse duration makes these spectra an excellent candidate for intra-pulse waveform synthesis.

Nonlinear compression of high energy fiber amplifier pulses in air-filled hypocycloid-core Kagome fiber

We report on the generation of 34 fs and 50 µJ pulses from a high energy fiber amplifier system with nonlinear compression in an air-filled hypocycloid-core Kagome fiber. The unique properties of such fibers allow bridging the gap between solid core fibers-based and hollow capillary-based post-compression setups, thereby operating with pulse energies obtained with current state-of-the-art fiber systems. The overall transmission of the compression setup is over 70%. Together with Yb-doped fiber amplifier technologies, Kagome fibers therefore appear as a promising tool for efficient generation of pulses with durations below 50 fs, energies ranging from 10 to several hundreds of µJ, and high average powers.

CW hollow-core optically pumped I₂ fiber gas laser

Continuous wave lasing of a hollow-core fiber gas laser (HOFGLAS) is achieved with molecular iodine in the 1280-1340 nm region when optically pumped at 532 nm.

A strong-field driver in the single-cycle regime based on self-compression in a kagome fibre

Over the past decade intense laser fields with a single-cycle duration and even shorter, subcycle multicolour field transients have been generated and applied to drive attosecond phenomena in strong-field physics. Because of their extensive bandwidth, single-cycle fields cannot be emitted or amplified by laser sources directly and, as a rule, are produced by external pulse compression-a combination of nonlinear optical spectral broadening followed up by dispersion compensation. Here we demonstrate a simple robust driver for high-field applications based on this Kagome fibre approach that ensures pulse self-compression down to the ultimate single-cycle limit and provides phase-controlled pulses with up to a 100 μJ energy level, depending on the filling gas, pressure and the waveguide length.

Anti-resonant hexagram hollow core fibers

Various simple anti-resonant, single cladding layer, hollow core fiber structures are examined. We show that the spacing between core and jacket glass and the shape of the support struts can be used to optimize confinement loss. We demonstrate the detrimental effect on confinement loss of thick nodes at the strut intersections and present a fabricated hexagram fiber that mitigates this effect in both straight and bent condition by presenting thin and radially elongated nodes. This fiber has loss comparable to published results for a first generation, multi-cladding ring, Kagome fiber with negative core curvature and has tolerable bend loss for many practical applications.

Efficient spectral broadening in the 100-W average power regime using gas-filled kagome HC-PCF and pulse compression

We present nonlinear pulse compression of a high-power SESAM-modelocked thin-disk laser (TDL) using an Ar-filled hypocycloid-core kagome hollow-core photonic crystal fiber (HC-PCF). The output of the modelocked Yb:YAG TDL with 127 W average power, a pulse repetition rate of 7 MHz, and a pulse duration of 740 fs was spectrally broadened 16-fold while propagating in a kagome HC-PCF containing 13 bar of static argon gas. Subsequent compression tests performed using 8.4% of the full available power resulted in a pulse duration as short as 88 fs using the spectrally broadened output from the fiber. Compressing the full transmitted power through the fiber (118 W) could lead to a compressed output of >100  W of average power and >100  MW of peak power with an average power compression efficiency of 88%. This simple laser system with only one ultrafast laser oscillator and a simple single-pass fiber pulse compressor, generating both high peak power >100  MW and sub-100-fs pulses at megahertz repetition rate, is very interesting for many applications such as high harmonic generation and attosecond science with improved signal-to-noise performance.

Analytic model for light guidance in single-wall hollow-core anti-resonant fibers

We report an analytic model for quantitatively calculating the transmission attenuation of single-wall hollow-core anti-resonant fibers. Our calculations unveil the light leakage dependences on azimuthal angle, polarization, and geometrical shape and have been examined in a variety of fiber geometries. Based on our model, a simple and clear picture about light guidance in hollow-core lattice fibers is presented. Formation of equiphase surface at fiber's outermost boundary and light emission ruled by Helmholtz equation in transverse plane constitute the basis of this picture. Using this picture, we explain how the geometrical shape of a single-wall hollow-core fiber influences its transmission properties.

Ultra low-loss hypocycloid-core Kagome hollow-core photonic crystal fiber for green spectral-range applications

We report on the development of a hypocycloidal-core Kagome hollow-core photonic crystal fiber guiding, with low transmission loss in the 450-650 nm visible spectral range. Transmission loss records have been achieved with 70  dB/km at 600 nm, and 130  dB/km at 532 nm. As a demonstration of the fiber potential applications, we report on a compact 600 THz wide Raman comb generator, centered around 532 nm, and on a 10 W average power frequency-doubled Yb-fiber picosecond laser beam delivery, along with its use for organic material laser micro-processing.

Nested antiresonant nodeless hollow core fiber

We propose a novel hollow core fiber design based on nested and non-touching antiresonant tube elements arranged around a central core. We demonstrate through numerical simulations that such a design can achieve considerably lower loss than other state-of-the-art hollow fibers. By adding additional pairs of coherently reflecting surfaces without introducing nodes, the Hollow Core Nested Antiresonant Nodeless Fiber (HC-NANF) can achieve values of confinement loss similar or lower than that of its already low surface scattering loss, while maintaining multiple and octave-wide antiresonant windows of operation. As a result, the HC-NANF can in principle reach a total value of loss - including leakage, surface scattering and bend contributions - that is lower than that of conventional solid fibers. Besides, through resonant out-coupling of high order modes they can be made to behave as effectively single mode fibers.

High Power Spark Delivery System Using Hollow Core Kagome Lattice Fibers

This study examines the use of the recently developed hollow core kagome lattice fibers for delivery of high power laser pulses. Compared to other photonic crystal fibers (PCFs), the hollow core kagome fibers have larger core diameter (~50 µm), which allows for higher energy coupling in the fiber while also maintaining high beam quality at the output (M² = 1.25). We have conducted a study of the maximum deliverable energy versus laser pulse duration using a Nd:YAG laser at 1064 nm. Pulse energies as high as 30 mJ were transmitted for 30 ns pulse durations. This represents, to our knowledge; the highest laser pulse energy delivered using PCFs. Two fiber damage mechanisms were identified as damage at the fiber input and damage within the bulk of the fiber. Finally, we have demonstrated fiber delivered laser ignition on a single-cylinder gasoline direct injection engine.

Damage-free single-mode transmission of deep-UV light in hollow-core PCF

Transmission of UV light with high beam quality and pointing stability is desirable for many experiments in atomic, molecular and optical physics. In particular, laser cooling and coherent manipulation of trapped ions with transitions in the UV require stable, single-mode light delivery. Transmitting even ~2 mW CW light at 280 nm through silica solid-core fibers has previously been found to cause transmission degradation after just a few hours due to optical damage. We show that photonic crystal fiber of the kagomé type can be used for effectively single-mode transmission with acceptable loss and bending sensitivity. No transmission degradation was observed even after >100 hours of operation with 15 mW CW input power. In addition it is shown that implementation of the fiber in a trapped ion experiment increases the coherence time of the internal state transfer due to an increase in beam pointing stability.

Lamb-Dicke spectroscopy of atoms in a hollow-core photonic crystal fibre

Unlike photons, which are conveniently handled by mirrors and optical fibres without loss of coherence, atoms lose their coherence via atom-atom and atom-wall interactions. This decoherence of atoms deteriorates the performance of atomic clocks and magnetometers, and also hinders their miniaturization. Here we report a novel platform for precision spectroscopy. Ultracold strontium atoms inside a kagome-lattice hollow-core photonic crystal fibre are transversely confined by an optical lattice to prevent atoms from interacting with the fibre wall. By confining at most one atom in each lattice site, to avoid atom-atom interactions and Doppler effect, a 7.8-kHz-wide spectrum is observed for the (1)S0-(3)P1(m=0) transition. Atoms singly trapped in a magic lattice in hollow-core photonic crystal fibres improve the optical depth while preserving atomic coherence time.

Multi-meter fiber-delivery and pulse self-compression of milli-Joule femtosecond laser and fiber-aided laser-micromachining

We report on damage-free fiber-guidance of milli-Joule energy-level and 600-femtosecond laser pulses into hypocycloid core-contour Kagome hollow-core photonic crystal fibers. Up to 10 meter-long fibers were used to successfully deliver Yb-laser pulses in robustly single-mode fashion. Different pulse propagation regimes were demonstrated by simply changing the fiber dispersion and gas. Self-compression to ~50 fs, and intensity-level nearing petawatt/cm(2) were achieved. Finally, free focusing-optics laser-micromachining was also demonstrated on different materials.