Monolithic fiber chirped pulse amplification system for millijoule femtosecond pulse generation at 1.55 µm

10-µJ-level femtosecond pulse generation in the erbium CPA fiber source with microstructured hollow-core fiber assisted delivery and nonlinear frequency conversion

We report on the development of a chirped pulse amplification (CPA) designed erbium fiber source with a hybrid high-power amplifier, which is composed of erbium-doped and erbium/ytterbium-co-doped double-clad large-mode-area fibers. Stretched pulses from the high-power amplifier with up to 21.9 µJ energy and 198.5 kHz repetition rate are dechirped in the transmission grating pair-based compressor with 73% efficiency, yielding as short as 742 fs duration with 15.8 µJ energy and ≈13M W peak power (maximum average power up to 3.14 W) at the central wavelength of 1.56 µm. Compressed pulses are coupled into microstructured negative-curvature hollow-core fibers with a single row capillary cladding and different core sizes of 34 µm and 75 µm in order to realize femtosecond pulse delivery with a diffraction-limited output beam (M 2≤1.09) and demonstrate ∼200n J Stokes pulse generation at 1712 nm via rotational SRS in pressurized hydrogen (H 2). We believe that the developed system may be a prospect for high-precision material processing and other high-energy and high-peak-power laser applications.

An Eye-Safe, SBS-Free Coherent Fiber Laser LIDAR Transmitter with Millijoule Energy and High Average Power

We report on an eye-safe, transform-limited, millijoule energy, and high average power fiber laser. The high gain and short length of the NP phosphate-glass fibers enable the SBS-free operation with kW level peak power. The output energy is up to 1.3 mJ, and the average power is up to 23 W at an 18 kHz repetition rate with 600 ns pulses (peak power > 2.1 kW). The PER is ≈16 dB and the M2 of the beam is 1.33 × 1.18. The coherent LIDAR Figure Of Merit (FOM) is 174 mJ*sqrt(Hz), which to our knowledge is the highest reported for a fiber laser. We also report 0.75 mJ energy and >3.7 kW peak power with down to 200 ns pulses and up to 1.21 mJ energy with a 3–5 kHz repetition rate operation of the current system.

Frequency-doubled femtosecond Er-doped fiber laser for two-photon excited fluorescence imaging

A femtosecond frequency-doubled erbium-doped fiber laser with an adjustable pulse repetition rate is developed and applied in two-photon excited fluorescence microscopy. The all-fiber laser system provides the fundamental pulse at 1560 nm wavelength with 22 fs duration for the second harmonic generation, resulting in 1.35 nJ, 60 fs pulses at 780 nm. The repetition rate is adjusted by a pulse picker unit built-in within the amplifier chain, directly providing transform-limited pulses for any chosen repetition rate between 1 and 12 MHz. We employed the laser source to drive a scanning two-photon excited fluorescence microscope for ex vivo rat skin and other samples' imaging at various pulse repetition rates. Due to compactness, ease of operation, and suitable pulse characteristics, the laser source can be considered as an attractive alternative for Ti:Sapphire laser in biomedical imaging.

Single frequency, 5 ns, 200 μJ, 1553 nm fiber laser using silica based Er-doped fiber

A 1553 nm Er-doped fiber master-oscillator-power-amplifier (MOPA) laser system providing pulses with a 6 kHz repetition rate, 5 ns duration, ~210 μJ energy, ~300 MHz linewidth, and with a near diffraction limited beam quality, was developed. A gain fiber as short as 0.7 m in length was utilized in order to relax the SBS effect. To the best of our knowledge, thus generated peak power of 40 kW is the highest one obtained from a single frequency Er-doped silica fiber laser. The pulse quality was verified by frequency conversion with a periodically poled lithium niobate nonlinear crystal (PPLN) for second harmonic generation. A pulse energy as high as ~100 μJ was achieved at 776.6 nm with a moderate incident energy of 133 μJ, indicating an energy conversion efficiency of 75%.

Monolithic polarization maintaining fiber chirped pulse amplification (CPA) system for high energy femtosecond pulse generation at 1.03 µm

A monolithic polarization maintaining fiber chirped pulse amplification system with 25 cm Yb(3+)-doped high efficiency media fiber that generates 62 µJ sub-400 fs pulses with 25 W at 1.03 µm has recently been demonstrated.

Focus issue introduction: Advanced Solid-State Lasers (ASSL) 2013

The editors introduce the focus issue on "Advanced Solid-State Lasers (ASSL) 2013," which is based on the topics presented at a congress of the same name held in Paris, France, from October 27 to November 1, 2013. This focus issue, jointly prepared by Optics Express and Optical Materials Express, includes 21 contributed papers (18 for Optics Express and 3 for Optical Materials Express) selected from the voluntary submissions from attendees who presented at the congress and have extended their work into complete research articles. We hope this focus issue offers a good snapshot of a variety of topical discussions held at the congress and will contribute to the further expansion of the associated research areas.