Silicon-organic hybrid (SOH) frequency comb sources for terabit/s data transmission

Electro-Optic Activity in Excess of 1000 pm V-1 Achieved via Theory-Guided Organic Chromophore Design

High performance organic electro-optic (OEO) materials enable ultrahigh bandwidth, small footprint, and extremely low drive voltage in silicon-organic hybrid and plasmonic-organic hybrid photonic devices. However, practical OEO materials under device-relevant conditions are generally limited to performance of ≈300 pm V^-1 (10× the EO response of lithium niobate). By means of theory-guided design, a new series of OEO chromophores is demonstrated, based on strong bis(4-dialkylaminophenyl)phenylamino electron donating groups, capable of EO coefficients (r₃₃ ) in excess of 1000 pm V^-1 . Density functional theory modeling and hyper-Rayleigh scattering measurements are performed and confirm the large improvement in hyperpolarizability due to the stronger donor. The EO performance of the exemplar chromophore in the series, BAY1, is evaluated neat and at various concentrations in polymer host and shows a nearly linear increase in r₃₃ and poling efficiency (r₃₃ /E_p , E_p is poling field) with increasing chromophore concentration. 25 wt% BAY1/polymer composite shows a higher poling efficiency (3.9 ± 0.1 nm² V^-2 ) than state-of-the-art neat chromophores. Using a high-ε charge blocking layer with BAY1, a record-high r₃₃ (1100 ± 100 pm V^-1 ) and poling efficiency (17.8 ± 0.8 nm² V^-2 ) at 1310 nm are achieved. This is the first reported OEO material with electro-optic response larger than thin-film barium titanate.

32QAM WDM transmission at 12 Tbit/s using a quantum-dash mode-locked laser diode (QD-MLLD) with external-cavity feedback

Chip-scale frequency comb generators lend themselves as multi-wavelength light sources in highly scalable wavelength-division multiplexing (WDM) transmitters and coherent receivers. Among different options, quantum-dash (QD) mode-locked laser diodes (MLLD) stand out due to their compactness and simple operation along with the ability to provide a flat and broadband comb spectrum with dozens of equally spaced optical tones. However, the devices suffer from strong phase noise, which impairs transmission performance of coherent links, in particular when higher-order modulation formats are to be used. Here we exploit coherent feedback from an external cavity to drastically reduce the phase noise of QD-MLLD tones, thereby greatly improving the transmission performance. In our experiments, we demonstrate 32QAM WDM transmission on 60 carriers derived from a single QD-MLLD, leading to an aggregate line rate (net data rate) of 12 Tbit/s (11.215 Tbit/s) at a net spectral efficiency (SE) of 7.5 bit/s/Hz. To the best of our knowledge, this is the first time that a QD-MLLD optical frequency comb has been used to transmit an optical 32QAM signal. Based on our experimental findings, we perform simulations that show that feedback-stabilized QD-MLLD should also support 64QAM transmission with a performance close to the theoretical optimum across a wide range of technically relevant symbol rates.

Performance of chip-scale optical frequency comb generators in coherent WDM communications

Optical frequency combs have the potential to become key building blocks of wavelength-division multiplexing (WDM) communication systems. The strictly equidistant narrow-band spectral lines of a frequency comb can serve either as carriers for parallel WDM transmission or as local-oscillator (LO) tones for parallel coherent reception. When it comes to highly scalable WDM transceivers with compact form factor, chip-sale comb sources are of particular interest, and recent experiments have demonstrated the viability of such devices for high-speed communications with line rates of tens of Tbit/s. However, the output power of chip-scale comb sources is generally lower than that of their conventional discrete-element counterparts, thus requiring additional amplifiers and impairing the optical signal-to-noise ratio (OSNR). In this paper, we investigate the influence of the power and optical carrier-to-noise ratio (OCNR) of the comb lines on the performance of the WDM link. We identify two distinctively different regimes, where the transmission performance is either limited by the comb source or by the link and the associated in-line amplifiers. We further investigate the impact of line-to-line power variations on the achievable OSNR and link capacity using a soliton Kerr frequency comb as a particularly interesting example. We believe that our findings will help to compare different comb generator types and to benchmark them with respect to the achievable transmission performance.

Frequency-tuning dual-comb spectroscopy using silicon Mach-Zehnder modulators

Dual-comb spectroscopy using a silicon Mach-Zehnder modulator is reported for the first time. First, the properties of frequency combs generated by silicon modulators are assessed in terms of tunability, coherence, and number of lines. Then, taking advantage of the frequency agility of electro-optical frequency combs, a new technique for fine resolution absorption spectroscopy is proposed, named frequency-tuning dual-comb spectroscopy, which combines dual-comb spectroscopy and frequency spacing tunability to measure optical spectra with detection at a unique RF frequency. As a proof of concept, a 24 GHz optical bandwidth is scanned with a 1 GHz resolution.

Coherent WDM transmission using quantum-dash mode-locked laser diodes as multi-wavelength source and local oscillator

Quantum-dash (QD) mode-locked laser diodes (MLLD) lend themselves as chip-scale frequency comb generators for highly scalable wavelength-division multiplexing (WDM) links in future data-center, campus-area, or metropolitan networks. Driven by a simple DC current, the devices generate flat broadband frequency combs, containing tens of equidistant optical tones with line spacings of tens of GHz. Here we show that QD-MLLDs can not only be used as multi-wavelength light sources at a WDM transmitter, but also as multi-wavelength local oscillators (LO) for parallel coherent reception. In our experiments, we demonstrate transmission of an aggregate net data rate of 3.9 Tbit/s (23 × 45 GBd PDM-QPSK, 7% FEC overhead) over 75 km standard single-mode fiber (SSMF). To the best of our knowledge, this represents the first demonstration of a coherent WDM link that relies on QD-MLLD both at the transmitter and the receiver.

Molecular Engineering of Structurally Diverse Dendrimers with Large Electro-Optic Activities

To boost electro-optic (EO) performance, a series of multichromophore dendrimers have been developed based on higher hyperpolarizability (CLD-type) chromophore cores that have been used previously (FTC-type dendrimers). The multichromophore dendrimers were molecularly engineered to have either three arms, two arms, or one arm; long or short linkers; and a fluorinated dendron (FD) or tert-butyldiphenylsilyl (TBDPS) shell. The EO performance obtained by FDSD (poling efficiency = 1.60 nm² V^-2), based on succinic diester linkers, was higher than the analogue with longer adipic diester linkers and higher than the analogs with fewer chromophore moieties. Due to the shorter succinic diester linker and improved site isolation, the dendrimer chromophore with TBDPS groups exhibited enhanced glass-transition temperature ( T_g = 108 °C) and comparable poling efficiency (1.62 nm² V^-2) to the FD-containing version. These neat EO dendrimers have a higher index of refraction ( n = 1.75-1.84 at 1310 nm) than guest-host polymeric EO materials ( n ≈ 1.6, 1310 nm) and FTC-type EO dendrimers ( n = 1.73, 1310 nm), which is important, because a key metric for Mach-Zehnder modulators is proportional to n³. In addition, binary chromophore organic glasses (BCOGs) were prepared by doping a secondary EO chromophore at 25 wt % into neat dendrimers. Enhancements of EO performance were found in all BCOG materials compared with neat dendrimers due to the effect of blending. As a result of increased chromophore density, the n values of the BCOGs improved to 1.81-1.92. One BOCG, in particular, displayed the highest poling efficiency (2.35 nm² V^-2) and largest EO coefficient ( r₃₃) value of 275 pm V^-1 at 1310 nm, which represents a high n³ r₃₃ figure-of-merit of 1946 pm V^-1. The high poling efficiencies and n³ r₃₃ figure-of-merit combined with excellent film forming confirm these neat dendrimers and BCOGs based on them as promising candidates for incorporation into photonic devices.

Fast high-precision distance metrology using a pair of modulator-generated dual-color frequency combs

We demonstrate fast high-precision non-contact distance measurements to technical surfaces using a pair of dual-color electro-optic frequency combs for synthetic-wavelength interferometry (SWI). The dual-color combs are generated from continuous-wave (cw) lasers at 1300 nm and 1550 nm, which are jointly fed to a pair of high-speed dual-drive Mach-Zehnder modulators. The dual-color approach is used for continuous and dead-zone-free compensation of temperature-induced fiber drift. We achieve standard deviations below 2 µm at an acquisition time of 9.1 µs for measurements through 7 m of single-mode fiber. Despite the technical simplicity of our scheme, our concept can well compete with other comb-based distance metrology approaches, and it can maintain its accuracy even under industrial operating conditions. The viability of the concept is demonstrated by attaching the fiber-coupled sensor head to an industrial coordinate measuring machine for acquisition of surface profiles of various technical samples. Exploiting real-time signal processing along with continuous fiber drift compensation, we demonstrate the acquisition of point clouds of up to 5 million data points during continuous movement of the sensor head.

Ultra-narrow linewidth quantum dot coherent comb lasers with self-injection feedback locking

We have used an external cavity self-injection feedback locking (SIFL) system to simultaneously reduce the optical linewidth of over 39 individual wavelength channels of an InAs/InP quantum dot (QD) coherent comb laser (CCL). Linewidth reduction from a few MHz to less than 200 kHz is observed. Measured phase noise spectra clearly indicate a significant decrease in phase noise in the frequency range above 2 kHz. The RF beating signal between two adjacent channels also shows a substantial reduction in 3-dB linewidth from 10 kHz to 300 Hz with the SIFL system, and a corresponding drop in baseline level (-27 dB to -50 dB).

High-order coherent communications using mode-locked dark-pulse Kerr combs from microresonators

Microresonator frequency combs harness the nonlinear Kerr effect in an integrated optical cavity to generate a multitude of phase-locked frequency lines. The line spacing can reach values in the order of 100 GHz, making it an attractive multi-wavelength light source for applications in fiber-optic communications. Depending on the dispersion of the microresonator, different physical dynamics have been observed. A recently discovered comb state corresponds to the formation of mode-locked dark pulses in a normal-dispersion microcavity. Such dark-pulse combs are particularly compelling for advanced coherent communications since they display unusually high power-conversion efficiency. Here, we report the first coherent-transmission experiments using 64-quadrature amplitude modulation encoded onto the frequency lines of a dark-pulse comb. The high conversion efficiency of the comb enables transmitted optical signal-to-noise ratios above 33 dB, while maintaining a laser pump power level compatible with state-of-the-art hybrid silicon lasers.

Dark-pulse combs may be useful for coherent communications since they display high power conversion efficiency. Here, the authors report the first demonstration of coherent wavelength division multiplexing using dark pulse microresonator combs high signal-to-noise while maintaining a low on-chip pump power.

Generation of tunable, high repetition rate optical frequency combs using on-chip silicon modulators

We experimentally demonstrate tunable, highly-stable frequency combs with high repetition-rates using a single, charge injection based silicon PN modulator. In this work, we demonstrate combs in the C-band with over eight lines in a 20-dB bandwidth. We demonstrate continuous tuning of the center frequency in the C-band and tuning of the repetition-rate from 7.5GHz to 12.5GHz. We also demonstrate through simulations the potential for bandwidth scaling using an optimized silicon PIN modulator. We find that the time varying free carrier absorption due to carrier injection, an undesirable effect in data modulators, assists here in enhancing flatness in the generated combs.

Frequency comb generation in a silicon ring resonator modulator

We report on the generation of an optical comb of highly uniform in power frequency lines (variation less than 0.7 dB) using a silicon ring resonator modulator. A characterization involving the measurement of the complex transfer function of the ring is presented and five frequency tones with a 10-GHz spacing are produced using a dual-frequency electrical input at 10 and 20 GHz. A comb shape comparison is conducted for different modulator bias voltages, indicating optimum operation at a small forward-bias voltage. A time-domain measurement confirmed that the comb signal was highly coherent, forming 20.3-ps-long pulses.

High performance InAs/InP quantum dot 34.462-GHz C-band coherent comb laser module

We have developed an InAs/InP quantum dot (QD) C-band coherent comb laser (CCL) module with actively stabilized absolute wavelength and power, and channel spacing of 34.462 GHz with ± 100 ppm accuracy. The total output power is up to 46 mW. The integrated average relative intensity noise (RIN) values of the lasing spectrum and a filtered single channel at 1540.19 nm were -165.6 dB/Hz and -130.3 dB/Hz respectively in the frequency range from 10 MHz to 10 GHz. The optical linewidth of the 45 filtered individual channels between 1531.77 nm to 1543.77 nm ranged from 850 kHz to 2.16 MHz. We have also analyzed the noise behaviors of each individual channel.

Silicon photonic integrated circuit for fast and precise dual-comb distance metrology

We demonstrate an optical distance sensor integrated on a silicon photonic chip with a footprint of well below 1 mm². The integrated system comprises a heterodyne receiver structure with tunable power splitting ratio and on-chip photodetectors. The functionality of the device is demonstrated in a synthetic-wavelength interferometry experiment using frequency combs as optical sources. We obtain accurate and fast distance measurements with an unambiguity range of 3.75 mm, a root-mean-square error of 3.4 µm and acquisition times of 14 µs.

Long-haul coherent communications using microresonator-based frequency combs

Microresonator-based frequency combs are strong contenders as light sources for wavelength-division multiplexing (WDM). Recent experiments have shown the potential of microresonator combs for replacing a multitude of WDM lasers with a single laser-pumped device. Previous demonstrations have however focused on short-distance few-span links reaching an impressive throughput at the expense of transmission distance. Here we report the first long-haul coherent communication demonstration using a microresonator-based comb source. We modulated polarization multiplexed (PM) quadrature phase-shift keying-data onto the comb lines allowing transmission over more than 6300 km in a single-mode fiber. In a second experiment, we reached beyond 700 km with the PM 16 quadrature amplitude modulation format. To the best of our knowledge, these results represent the longest fiber transmission ever achieved using an integrated comb source.

Multi-wavelength coherent transmission using an optical frequency comb as a local oscillator

Steadily increasing data rates of optical interfaces require spectrally efficient coherent transmission using higher-order modulation formats in combination with scalable wavelength-division multiplexing (WDM) schemes. At the transmitter, optical frequency combs (OFC) lend themselves to particularly precise multi-wavelength sources for WDM transmission. In this work we demonstrate that these advantages can also be leveraged at the receiver by using an OFC as a highly scalable multi-wavelength local oscillator (LO) for coherent detection. In our experiments, we use a pair of OFC that rely on gain switching of injection-locked semiconductor lasers both for WDM transmission and intradyne reception. We synchronize the center frequency and the free spectral range of the receiver comb to the transmitter, keeping the intradyne frequencies for all data channels below 15 MHz. Using 13 WDM channels, we transmit an aggregate line rate (net data rate) of 1.104 Tbit/s (1.032 Tbit/s) over a 10 km long standard single mode fiber at a spectral efficiency of 5.16 bit/s/Hz. To the best of our knowledge, this is the first demonstration of coherent WDM transmission using synchronized frequency combs as light source at the transmitter and as multi-wavelength LO at the receiver.

Single-section quantum well mode-locked laser for 400 Gb/s SSB-OFDM transmission

Successful use of a single-section quantum well (QW) passively mode-locked laser (MLL) as a comb source for optical interconnects is demonstrated for the first time. Sixteen comb lines spaced by 37.6 GHz are modulated using 25 Gb/s compatible single sideband orthogonal frequency division multiplexed (SSB-OFDM) signals and transmitted over 50 km of standard single-mode fiber with bit error ratio below the 7% forward error correction limit. The system performance, analyzed on the basis of the relative intensity noise of the device, reveal the suitability of single-section QW MLLs as inexpensive comb sources for inter- and intra-data center communication scenarios.

Demonstration of terabit-scale data transmission in silicon vertical slot waveguides

We design and fabricate silicon vertical slot waveguides for terabit-scale data transmission. The designed silicon photonic device is composed of apodized grating couplers, strip waveguides, strip-to-slot/slot-to-strip mode converters, and slot waveguide. Tight light confinement in the nano-scale air slot region is achieved in the silicon vertical slot waveguide which features relatively lower nonlinearity compared to silicon strip waveguide. Using the fabricated silicon photonic devices, we first demonstrate ultra-wide bandwidth 1.8-Tbit/s data transmission through a 2-mm-long silicon vertical slot waveguide using 161 wavelength-division multiplexing (WDM) channels each carrying 11.2-Gbit/s orthogonal frequency-division multiplexing (OFDM) 16-ary quadrature amplitude modulation (16-QAM) signal. All 161 WDM channels achieve bit-error rate (BER) less than 1e-3 after on-chip data transmission. We further demonstrate terabit-scale data transmission through four silicon vertical slot waveguides with different lengths (1 mm, 2 mm, 3.1 mm, 12.2 mm). The optical signal-to-noise ratio (OSNR) penalties of data transmission through four silicon vertical slot waveguides are 1, 2, 3.2 and 4.5 dB at a BER of 1e-3, respectively. The obtained results indicate that the presented silicon vertical slot waveguide might be an alternative promising candidate facilitating chip-scale high-speed optical interconnections.

Flexible terabit/s Nyquist-WDM super-channels using a gain-switched comb source

Terabit/s super-channels are likely to become the standard for next-generation optical networks and optical interconnects. A particularly promising approach exploits optical frequency combs for super-channel generation. We show that injection locking of a gain-switched laser diode can be used to generate frequency combs that are particularly well suited for terabit/s super-channel transmission. This approach stands out due to its extraordinary stability and flexibility in tuning both center wavelength and line spacing. We perform a series of transmission experiments using different comb line spacings and modulation formats. Using 9 comb lines and 16QAM signaling, an aggregate line rate (net data rate) of 1.296 Tbit/s (1.109 Tbit/s) is achieved for transmission over 150 km of standard single mode fiber (SSMF) using a spectral bandwidth of 166.5 GHz, which corresponds to a (net) spectral efficiency of 7.8 bit/s/Hz (6.7 bit/s/Hz). The line rate (net data rate) can be boosted to 2.112 Tbit/s (1.867 Tbit/s) for transmission over 300 km of SSMF by using a bandwidth of 300 GHz and QPSK modulation on the weaker carriers. For the reported net data rates and spectral efficiencies, we assume a variable overhead of either 7% or 20% for forward- error correction depending on the individual sub-channel quality after fiber transmission.

Recent advances in polymer electro-optic modulators

Development of polymer EO modulators.

Bandwidth scaling of a phase-modulated continuous-wave comb through four-wave mixing in a silicon nano-waveguide

We demonstrate an on-chip four-wave mixing (FWM) scheme in a silicon nanowaveguide to scale the bandwidth of a frequency comb generated by phase modulation of continuous-wave (CW) lasers. The FWM process doubles the bandwidth of the initial comb generated by the modulation of a CW laser. For example, a wavelength-tunable frequency comb with >100 comb lines spaced by 10 GHz within a bandwidth of 5 dB is generated.