High-power parametric conversion from near-infrared to short-wave infrared

Design and fabrication of dispersion controlled highly nonlinear fibers for far-detuned four-wave mixing frequency conversion

We report on the conception, fabrication and characterization of a new concept of optical fiber enabling a precise control of the ratio between the 2^nd and 4^th-order of chromatic dispersion (respectively β₂ and β₄) at 1.55 µm which is at the heart of the Four-Wave-Mixing (FWM) generation. For conventional highly nonlinear fiber the sensitivity of this ratio to fiber geometry fluctuations is very critical, making the fabrication process challenging. The new design fiber reconciles the accurate control of chromatic dispersion properties and fabrication by standard stack and draw method, allowing a robust and reliable method against detrimental fluctuations parameters during the fabrication process. Experimental frequency conversion with FWM in the new design fiber is demonstrated.

Polarization selective ultra-broadband wavelength conversion in silicon nitride waveguides

We experimentally demonstrate broadband degenerate continuous-wave four-wave mixing in long silicon nitride (Si₃N₄) waveguides for operation both in the telecommunication L-band and the thulium band near 2 µm by leveraging polarization dependence of the waveguide dispersion. Broadband conversion is typically demonstrated in short milimeter long waveguides as the bandwidth is linked to the interaction length. This makes it challenging to simultaneously push bandwidth and efficiency, imposing stringent constraints on dispersion engineering. In this work, we show conversion bandwidths larger than 150 nm in the L-band when pumping in the transverse magnetic (TM) mode and larger than 120 nm at 2 µm when using transverse electric excitation, despite the use of 0.5 m long waveguides. In addition, we also show how extreme polarization selectivity can be leveraged in a single waveguide to enable switchable distant phase-matching based on higher-order dispersion. Relying on this approach, we demonstrate the selective conversion of light from the telecom band to the O-band for TM polarization or to the mid-infrared light up to 2.5 µm in TE. Our experiments are in excellent agreement with simulations, showing the high potential of the platform for broadband and distant conversion beyond the telecom band.

Gain-switched monolithic fiber laser with ultra-wide tuning range at 2 μm

We demonstrate a gain-switched thulium-doped fiber laser (TDFL) built in an all-fiber format producing nanosecond pulses with variable wavelength in the 2 μm waveband. The laser features tunable operation in an ultra-wide spectral region of 1765 - 2055 nm (24 THz). The nearly 300 nm tunability doubles the record tuning range of existing gain-switched fiber lasers, and to the best of our knowledge, presents the broadest tuning range that has been reported for a monolithic pulsed rare earth doped fiber laser to date. The TDFL can operate at a repetition rate of 2.5 - 100 kHz with a pulse width as short as ~200 ns. Influences of various system parameters on the laser performance are investigated in detail.

High-power widely tunable all-fiber thulium-assisted optical parametric oscillator at SWIR band

A novel short-wave infrared (SWIR) all-fiber thulium-assisted optical parametric oscillator (TAOPO) that exploits jointly optical parametric conversion and thulium amplification in a highly nonlinear fiber (HNLF) and thulium-doped fiber (TDF) is demonstrated. This is implemented through constructing a joint fiber line by directly fusion splicing 50 m HNLF with 1.5 m TDF. Incorporating a bidirectional-pumping scheme, i.e., forward-pumped by a step-tuned C-band pulsed laser, and simultaneously backward-pumped by an L-band continuous-wave laser, this TAOPO produces a pulsed SWIR laser at output power higher than 200 mW, signal-to-noise ratio over 40 dB, and wavelength tuning range beyond 150 nm from 1815 to 1968 nm. Via separate characterization of the HNLF and TDF joint fiber line, the tunability of the current TAOPO to shorter wavelength is only limited by the employed fiber components, while higher power could be realized by increasing the backward pump power. This TAOPO could be a promising platform for the generation of a highly functional SWIR source that facilitates applications such as bond-selective imaging of deep tissue.

Passively synchronized Q-switched and mode-locked dual-band Tm3+:ZBLAN fiber lasers using a common graphene saturable absorber

Dual-band fiber lasers are emerging as a promising technology to penetrate new industrial and medical applications from their dual-band properties, in addition to providing compactness and environmental robustness from the waveguide structure. Here, we demonstrate the use of a common graphene saturable absorber and a single gain medium (Tm³⁺:ZBLAN fiber) to implement (1) a dual-band fiber ring laser with synchronized Q-switched pulses at wavelengths of 1480 nm and 1840 nm, and (2) a dual-band fiber linear laser with synchronized mode-locked pulses at wavelengths of 1480 nm and 1845 nm. Q-switched operation at 1480 nm and 1840 nm is achieved with a synchronized repetition rate from 20 kHz to 40.5 kHz. For synchronous mode-locked operation, pulses with full-width at half maximum durations of 610 fs and 1.68 ps at wavelengths of 1480 nm and 1845 nm, respectively, are obtained at a repetition rate of 12.3 MHz. These dual-band pulsed sources with an ultra-broadband wavelength separation of ~360 nm will add new capabilities in applications including optical sensing, spectroscopy, and communications.

A two-stage photonic crystal fiber / silicon photonic wire short-wave infrared wavelength converter/amplifier based on a 1064 nm pump source

We demonstrate a two-stage wavelength converter that uses compact near-infrared sources to amplify and convert short-wave infrared signals. The first stage consists of a photonic crystal fiber wavelength converter pumped by a Q-switched 1064 nm pump source, while the second stage consists of a silicon photonic wire waveguide wavelength converter. The system enables on-chip amplification and conversion of up to 30 dB . We demonstrate amplification in a broad wavelength range around 2344 nm using temporally long pulses (>300ps).

Broadly tunable source around 2050 nm based on wideband parametric conversion and thulium-holmium amplification cascade

We report the design of a short-wave infrared continuous-wave light source featuring a 20 mW average output power, and with a wavelength that can be freely selected in the 2000-2100 nm range amid a low power ripple. The operating principle relies on the simultaneous broadband parametric conversion of two seeds in a highly nonlinear silica fiber pumped in the L-band followed by amplification and equalization in an appended thulium- and holmium- doped fiber cascade directly pumped by their respective previous stage.