Optical side scattering radiometry for high resolution, wide dynamic range longitudinal assessment of optical fibers

Polarization sensitive optical side leakage radiometry for distributed characterization of anti-resonant hollow-core fibers

A novel technique referred to as optical side leakage radiometry is proposed and experimentally demonstrated for non-destructive and distributed characterization of anti-resonant hollow-core optical fibers with high spatial resolution. Through in-depth analysis of the leakage light collection, we discover a unique polarization dependence, which is validated by our experiment. By leveraging this effect and employing Fourier filtering, this method enables accurate quantification of propagation attenuations for fundamental and higher order modes (with the uncertainty of <1 dB/km), identification of localized defects (with the resolution of ∼5 cm), and measurement of ultra-low spectral phase birefringence (at the level of 10-7) in two in-house-fabricated nested antiresonant nodeless hollow-core fibers. Such a fiber characterization approach, boasting unprecedently high accuracy and a potentially wide dynamic range, holds the potential to become an indispensable diagnosis tool for monitoring and assisting the manufacture of high-quality anti-resonant hollow-core fiber.

Selectively gas-filled anti-resonant hollow-core fibers for broadband high-purity LP11 mode guidance

An anti-resonant hollow-core fiber capable of propagating the LP₁₁ mode with high purity and over a wide wavelength range is proposed and demonstrated. The suppression of the fundamental mode relies on the resonant coupling with specific gas selectively filled into the cladding tubes. After a length of 2.7 m, the fabricated fiber shows a mode extinction ratio of over 40 dB at 1550 nm and above 30 dB in a wavelength range of 150 nm. The loss of the LP₁₁ mode is measured to be 2.46 dB/m at 1550 nm. We discuss the potential application of such fibers in high-fidelity high-dimensional quantum state transmission.

Novel method for manufacturing optical fiber: extrusion and drawing of microstructured polymer optical fibers from a 3D printer

Microstructured polymer optical fibers (MPOFs) have long attracted great interest due to their wide range of applications in biological and chemical sensing. In this manuscript, we demonstrate a novel technique of manufacturing MPOF via a single-step procedure by means of a 3D printer. A suspended-core polymer optical fiber has been extruded and directly drawn from a micro-structured 3D printer nozzle by using an acrylonitrile butadiene styrene (ABS) polymer. Near-field imaging at the fiber facet performed at the wavelength λ~1550 nm clearly indicates guidance in the fiber core. The propagation loss has been experimentally demonstrated to be better than α = 1.1 dB/cm. This work points toward direct MPOFs manufacturing of varieties of materials and structures of optical fibers from 3D printers using a single manufacturing step.

Low-loss Kagome hollow-core fibers operating from the near- to the mid-IR

We report the fabrication and characterization of Kagome hollow-core antiresonant fibers, which combine low attenuation (as measured at ∼30  cm bend diameter) with a wide operating bandwidth and high modal purity. Record low attenuation values are reported: 12.3 dB/km, 13.9 dB/km, and 9.6 dB/km in three different fibers optimized for operation at 1 μm, 1.55 μm, and 2.5 μm, respectively. These fibers are excellent candidates for ultra-high power delivery at key laser wavelengths including 1.064 μm and 2.94 μm, as well as for applications in gas-based sensing and nonlinear optics.