High-energy few-cycle Yb-doped fiber amplifier source based on a single nonlinear compression stage

Broadband spectral combining of three pulse-shaped fiber amplifiers with 42fs compressed pulse duration

We demonstrate ultra-broadband spectral combining of ultrashort pulses from Yb-doped fiber amplifiers, with coherently spectrally synthesized pulse shaping, to achieve tens-of-fs pulses. This method can fully compensate for gain narrowing and high order dispersion over broad bandwidth. We produce 42fs pulses by spectrally synthesizing three chirped-pulse fiber amplifiers and two programmable pulse shapers across an 80nm overall bandwidth. To the best of our knowledge, this is the shortest pulse duration achieved from a spectrally combined fiber system at one-micron wavelength. This work provides a path toward high-energy, tens-of-fs fiber chirped-pulse amplification systems.

Generation of few-cycle pulses from a mode-locked Tm-doped fiber laser

We report a compact, self-starting dispersion-managed mode-locked thulium-doped fiber oscillator that delivers 2.6 nJ pulses at 2 µm with a repetition rate of 250 MHz. The average output power and spectral bandwidth of the pulses reach impressive values of 648 mW and 103 nm, respectively. The generated pulses are near linearly chirped, capable of linearly compressing to 74 fs in a normal dispersion fiber after power attenuation. Using a nonlinear fiber compression scheme can even compress the pulses to 29 fs (4.3-cycle). The remaining pulse energy is 1.15 nJ, and the corresponding peak power is estimated as 39.4 kW. To the best of our knowledge, this is the first demonstration of nonlinearly compressing the pulse of a 2 µm fiber oscillator to the sub-5 cycle regime. Such a few-cycle fiber laser could be an ideal candidate source for short-wavelength mid-infrared frequency metrology and molecular spectroscopy applications.

High-power sub-15 fs nonlinear pulse compression at 515 nm of an ultrafast Yb-doped fiber amplifier

We present an efficient and robust scheme to produce energetic sub-15 fs pulses centered at 515 nm with a peak power exceeding 3 GW. Combining efficient second-harmonic generation of a 135 fs, 50 W Yb-doped fiber amplifier with a low-loss capillary-based visible pulse compression stage, we reach an overall efficiency higher than >20%. The system is also designed to take advantage of the repetition rate flexibility of the fiber amplifier, leading sub-15 fs pulse generation from 166 to 500 kHz with an average power exceeding the 10 watt level. The combined reduction of the laser wavelength and pulse duration is expected to highly improve the yield of high-order harmonic generation to provide high photon flux of ultrashort extreme ultraviolet radiation.

Overcoming gas ionization limitations with divided-pulse nonlinear compression

We simulate Kerr and plasma nonlinearities in a hollow-core fiber to show how plasma effects degrade the output pulse. Our simulations predict the plasma effects can be avoided entirely by implementing divided-pulse nonlinear compression. In divided-pulse nonlinear compression, a high-energy pulse is divided into multiple low-energy pulses, which are spectrally broadened in the hollow-core fiber and then recombined into a high-energy, spectrally broadened pulse. With the plasma effects overcome, spectral broadening can be scaled to larger broadening factors and higher pulse energies. We anticipate this method will also be useful to scale spectral broadening in gas-filled multipass cells.

Spectral compression in a multipass cell

Starting from a femtosecond ytterbium-doped fiber amplifier, we demonstrate the generation of near Fourier transform-limited high peak power picosecond pulses through spectral compression in a nonlinear solid-state-based multipass cell. Input 260 fs pulses negatively chirped to 2.4 ps are spectrally compressed from 6 nm down to 1.1 nm, with an output energy of 13.5 µJ and near transform-limited pulses of 2.1 ps. A pulse shaper included in the femtosecond source provides some control over the output spectral shape, in particular its symmetry. The spatial quality and spatio-spectral homogeneity are conserved in this process. These results show that the use of multipass cells allows energy scaling of spectral compression setups while maintaining the spatial properties of the laser beam.

Ultrafast Fiber Lasers: An Expanding Versatile Toolbox

Ultrafast fiber lasers have gained rapid advances in last decades for their intrinsic merits such as potential of all-fiber format, excellent beam quality, superior power scalability, and high single-pass gain, which opened widespread applications in high-field science, laser machining, precision metrology, optical communication, microscopy and spectroscopy, and modern ophthalmology, to name a few. Performance of an ultrafast fiber laser is well defined by the laser parameters including repetition rate, spectral bandwidth, pulse duration, pulse energy, wavelength tuning range, and average power. During past years, these parameters have been pushed to an unprecedented level. In this paper, we review these enabling technologies and explicitly show that the nonlinear interaction between ultrafast pulses and optical fibers plays the essential role. As a result of rapid development in both active and passive fibers, the toolbox of ultrafast fiber lasers will continue to expand and provide solutions to scientific and industrial problems.

Nonlinear pulse compression to 22 fs at 15.6 µJ by an all-solid-state multipass approach

We demonstrate nonlinear compression of pulses at 1.03 µm and repetition rate of 200 kHz generated by a ytterbium fiber laser using two cascaded all-solid-state multipass cells. The pulse duration has been compressed from 460 to 22 fs, corresponding to a compression factor of ∼21. The compressed pulse energy is 15.6 µJ, corresponding to an average power of 3.1 W, and the overall transmission of the two compression stages is 76%. The output beam quality factor is M² ∼1.2 and the excess intensity noise introduced by nonlinear broadening is below 0.05%. These results show that nonlinear pulse compression down to ultrashort durations can be achieved with an all-solid-state approach, at pulse energies much higher than previously reported, while preserving the spatial characteristics of the laser.

CEP-stable high-energy ytterbium-doped fiber amplifier

We report on the carrier-envelope phase (CEP) stabilization of a Yb-doped fiber amplifier system delivering 30 μJ pulses at 100 kHz repetition rate. A single-shot, every-shot measurement of the CEP stability based on a simple f-2f interferometer is performed, yielding a CEP standard deviation of 320 mrad rms over 1 s. Long-term stability is also assessed, with 380 mrad measured over 1 h. This level of performance is allowed by a hybrid architecture, including a passively CEP-stabilized front-end based on difference frequency generation and an active CEP stabilization loop for the fiber amplifier system, acting on a telecom-grade integrated LiNbO3 phase modulator. Together with recent demonstrations of temporal compression down to the few-cycle regime, the presented results demonstrate the relevance of the Yb-doped high repetition rate laser for attoscience.

Cascaded harmonic generation from a fiber laser: a milliwatt XUV source

Recent progresses in femtosecond ytterbium-doped fiber laser technology are opening new perspectives in strong field physics and attosecond science. High-order harmonic generation from these systems is particularly interesting because it provides high flux beams of ultrashort extreme ultraviolet radiation. A great deal of effort has been devoted to optimize the macroscopic generation parameters. Here we investigate the possibility of enhancing the single-atom response by producing high-order harmonics from the second, third and fourth harmonics of a turnkey 50 W, 166 kHz femtosecond Yb-fiber laser providing 135 fs pulses at 1030 nm. We show that the harmonic efficiency is optimal when the process is driven by the third harmonic, producing 6.6 ± 1.3 × 10¹⁴ photons/s at 18 eV in argon, which corresponds to 1.9 ± 0.4 mW average power.

Influence of the spatial confinement on the self-focusing of ultrashort pulses in hollow-core fibers

The collapse of a laser beam propagating inside a hollow-core fiber is investigated by numerically solving different nonlinear propagation models. We have identified that the fiber confinement favors the spatial collapse, especially in case of pulses with the input peak power close to the critical value. We have also observed that when using pulses in the femtosecond range, the temporal dynamics plays an important role, activating the spatial collapse even for pulses with input peak powers below the critical value. The complex self-focusing dynamics observed in the region below the critical power depends on the temporal evolution of the pulse and, also, on the interaction between the different spatial modes of the hollow-core fiber.

Greater than 50 times compression of 1030 nm Yb:KGW laser pulses to single-cycle duration

Generation of octave-spanning spectrum that spans from 570 nm to 1300 nm utilizing 1030 nm 170 fs pulses from a Yb:KGW laser and a two-stage multiple-plate arrangement is demonstrated. 3.21 fs sub-single-cycle pulses are obtained after dispersion compensation. The high compression ratio of more than 50 times is achieved for two scenarios with widely different parameters including high input peak power at 1 kHz repetition rate and modest peak power at a high repetition rate of 100 kHz. The output pulses have good spatial mode quality and exhibit long-term stability. The achieved compression ratio and flexibility are unprecedented in ultrafast pulse compression to single-cycle regime. The experiments demonstrate that the technique of multiple-plate pulse compression is versatile and applicable for a wide range of laser pulse parameters.

High-power two-cycle ultrafast source based on hybrid nonlinear compression

We demonstrate a hybrid dual-stage nonlinear compression scheme, which allows the temporal compression of 330 fs-pulses down to 6.8 fs-pulses, with an overall transmission of 61%. This high transmission is obtained by using a first compression stage based on a gas-filled multipass cell, and a second stage based on a large-core gas-filled capillary. The source output is fully characterized in terms of spectral, temporal, spatial, and short- and long-term stability properties. The system's compactness, stability, and high average power makes it ideally suited to drive high photon flux XUV sources through high harmonic generation.

Molecular gases for pulse compression in hollow core fibers

We introduce hydrofluorocarbon molecules as an alternative medium to noble gases with low ionization potential like krypton or xenon to compress ultrashort pulses of relatively low energy in a conventional hollow core fiber with subsequent dispersion compensation. Spectral broadening of pulses from two different laser systems exceeded those achieved with argon and krypton. Initially 40 fs, 800 nm, 120 μJ pulses were compressed to few optical cycles duration. With the same approach a compression factor of more than 10 was demonstrated for an ytterbium-based laser (1030 nm, 170 fs, 200 μJ) leading to 15.6 fs.

Continuous every-single-shot carrier-envelope phase measurement and control at 100 kHz

With the emergence of high-repetition-rate few-cycle laser pulse amplifiers aimed at investigating ultrafast dynamics in atomic, molecular, and solid-state science, the need for ever faster carrier-envelope phase (CEP) detection and control has arisen. Here we demonstrate a high-speed, continuous, every-single-shot measurement and fast feedback scheme based on a stereo above-threshold ionization time-of-flight spectrometer capable of detecting the CEP and pulse duration at a repetition rate of up to 400 kHz. This scheme is applied to a 100 kHz optical parametric chirped pulse amplification few-cycle laser system, demonstrating improved CEP stabilization and allowing for CEP tagging.

Pulse propagation in hollow-core fiber at high-pressure regime: application to compression of tens of μJ pulses and determination of nonlinear refractive index of xenon at 1.03 μm

Classical expression for the propagation constant and absorption coefficient derived by Narcatilli and Schmeltzer for hollow-core fiber (HCF) has been slightly modified to account for noble gas material dispersion at high gas pressure. As a proof of concept, the nonlinear refractive index of xenon (Xe) gas has been investigated by numerically fitting to experimentally obtained spectral broadening in HCF under intense high repetition rate pulses. By varying the Xe pressure inside the HCF, a pressure-dependent nonlinear refractive index value of κ₂=(50.1±0.3)×10^-20  cm²/W atm at 1.03 μm is obtained, which compares favorably with literature reported values. Finally, temporal compression of 50 μJ, 320 fs pulses at 0.6 MHz repetition rate to 61 fs with 0.29 GW peak power in a HCF filled with 5 bars of Xe gas has been demonstrated using a single HCF compression stage.

Nonlinear pulse compression based on a gas-filled multipass cell

We demonstrate nonlinear temporal compression of a high-energy Yb-doped fiber laser source in a multipass cell filled with argon. The 160 μJ 275 fs input pulses are compressed down to 135 μJ 33 fs at the output, corresponding to an overall transmission of 85%. We also analyze the output beam, revealing essentially no space-time couplings. We believe this technique can be scalable to higher pulse energies and shorter pulse durations, enabling access to a wider parameter range for a large variety of ultrafast laser sources.

Generation of coherent extreme ultraviolet radiation from α-quartz using 50 fs laser pulses at a 1030 nm wavelength and high repetition rates

Coherent extreme ultraviolet (EUV) radiation using high-harmonic generation (HHG) in α-quartz is demonstrated from 10 to 200 kHz, using 50 fs laser pulses at the center wavelength of 1030 nm. The EUV radiation extends beyond 25 eV in the nondamaging regime. The number of photons generated in a single harmonic order at 15.6 eV is measured to be ≈(3.5±2.5)×10¹⁰ per second which, to the best of our knowledge, is a first and record value reported to date using EUV HHG from solids. This Letter demonstrates one of the first all-solid-state EUV sources based on industrial-grade fiber lasers, enabling the possibility of bringing reliable EUV sources to the mass market.

Compression of picosecond pulses from a thin-disk laser to 30fs at 4W average power

We investigate two approaches for the spectral broadening and compression of 1-ps long pulses of a thin-disk laser amplifier running at 50 kHz repetition rate at 1030 nm wavelength. We find that with a single, 2.66-m long stretched flexible hollow fiber filled with xenon gas, Fourier transform limited output pulse duration of 66 fs can be directly reached. For larger pulse shortening, we applied a hybrid cascaded approach involving a BBO-based pre-compressor and a long hollow fiber. We could achieve 33-times temporal shortening of 1-ps pulses down to a duration of 30 fs at an overall efficiency of ~29% with an output power level of 3.7 W. These results demonstrate the potential of stretched flexible fibers with their free length scalability for shortening laser pulses of moderate peak power.