Robust label-free biosensing using microdisk laser arrays with on-chip references

Simultaneous temperature and pressure sensing based on a single optical resonator

We propose a dual-parameter sensor for the simultaneous detection of temperature and pressure based on a single packaged microbubble resonator (PMBR). The ultrahigh-quality (∼10⁷) PMBR sensor exhibits long-term stability with the maximum wavelength shift about 0.2056 pm. Here, two resonant modes with different sensing performance are selected to implement the parallel detection of temperature and pressure. The temperature and pressure sensitivities of resonant Mode-1 are -10.59 pm/°C and 0.1059 pm/kPa, while the sensitivities of Mode-2 are -7.69 pm/°C and 0.1250 pm/kPa, respectively. By adopting a sensing matrix, the two parameters are precisely decoupled and the root mean square error of measurement are ∼ 0.12 °C and ∼ 6.48 kPa, respectively. This work promises the potential for the multi-parameters sensing in a single optical device.

Integrated refractive index sensor based on an AlN-PSiO2 hybrid plasmonic microdisk resonator

In this paper, a microdisk resonator (MDR) based on an AlN-PSiO₂ hybrid plasmonic waveguide (HPW) and its refractive index (RI) sensing characteristics are investigated. The plasmonic characteristics of the MDR based on the AlN-PSiO₂ HPW (APHPW-MDR) in near-infrared wavelengths are studied by using the finite element method. Through the structure parameter optimizations, the propagation length (L_prop) of the APHPW-MDR is ∼165µm, which is ∼2.5 times as long as that of the MDR based on the AlN HPW (AHPW-MDR). The simulation results show that the quality factor (Q) and extinction rate (ER) of the APHPW-MDR are ∼621.3 and ∼30dB, respectively. The RI sensing sensitivity (S) of the RI sensor based on the APHPW-MDR is ∼276.6nm/RIU. The RI sensor based on the APHPW-MDR has wide application prospects in high-performance biochemical sensing, and it can also be used in integrated optical filters, modulators, switches, routers, and delay circuits.

Differential Polymer Chain Scission Enables Free-Standing Microcavity Laser Arrays

Control over material architectures is essential to the performance of photonic devices and systems. Optical isolation of the photonic materials from substrates can significantly enhance their performance but suffers from complicated fabrication processes and limited applications. Here a differential polymer chain scission strategy is proposed to fabricate free-standing photonic structures based on one-step electron-beam direct writing on polymer bilayers (EOB). The polymer molecular mass-dependent sensitivity to electron beam enables differential patterning of the two layers of polymers, leading to the direct formation of suspended optical microcavities. The EOB technique features high materials compatibility and design flexibility for the optical microcavities, which significantly expands the application scope of the suspended optical microcavities. As well as providing a versatile strategy for building high-performance photonic materials, the results provide a promising platform for innovative applications of optical microstructures.

Continuous tuning of unidirectional emission wavelength by bending a notched-elliptical polymer microdisk

An approach of continuously tunable unidirectional emission through bending a notched-elliptical polymer microdisk is proposed. The characteristics of the bending-dependent action are carefully analyzed, and the resonance wavelength for unidirectional emission can be tuned continuously through bending the device. Such a whispering-gallery-mode microresonator enables unidirectional emission with ultra-low divergence, of which the emission efficiency and Q factor are stabilized, demonstrating the whole structure is robust and relatively insensitive within a certain bending angle range. A maximum resonance wavelength shift of ∼100 nm and Q factor of 1500 can be achieved with the total size of the microdisk less than 10 μm. This kind of microresonator is promising for applications in multilevel integrated photonics circuits and may open the door to new functionalities of resonator devices, from sensing to optical amplification.

Ink-jet printed, blended polymer-based microdisk resonators for controlling non-specific adsorption of biomolecules

A blended FC-V-50 and TZ-001 polymer-based microdisk laser was fabricated by the ink-jet printing method and used for biosensing applications. The FC-V-50 polymer has a negative charge due to the presence of carboxyl functional groups, and the TZ-001 polymer has a positive charge due to the tertiary amine group at a pH of seven. In biosensing applications, non-specific adsorption due to opposite charges of biomolecules and microdisk surfaces can adversely affect the performance of the biosensor. By mixing FC-V-50 and TZ-001 polymers in different ratios, the microdisk surface charge was controlled, and the non-specific adsorption of bovine serum albumin and lysozyme was studied. In addition, the label-free biosensing of streptavidin was demonstrated using a blended polymer-based microdisk laser. This work reports, to the best of our knowledge, the first demonstration of a blended polymer microdisk laser for controlling the non-specific adsorption of biomolecules.

Vapor-deposited functional polymer thin films in biological applications

Functional polymer coatings have become ubiquitous in biological applications, ranging from biomaterials and drug delivery to manufacturing-scale separation of biomolecules using functional membranes. Recent advances in the technology of chemical vapor deposition (CVD) have enabled precise control of the polymer chemistry, coating thickness, and conformality. That comprehensive control of surface properties has been used to elicit desirable interactions at the interface between synthetic materials and living organisms, making vapor-deposited functional polymers uniquely suitable for biological applications. This review captures the recent technological development in vapor-deposited functional polymer coatings, highlighting their biological applications, including membrane-based bio-separations, biosensing and bio-MEMS, drug delivery, and tissue engineering. The conformal nature of vapor-deposited coatings ensures uniform coverage over micro- and nano-structured surfaces, allowing the independent optimization of surface and bulk properties. The substrate-independence of CVD techniques enables facile transfer of surface characteristics among different applications. The vapor-deposited functional polymer thin films tend to be biocompatible because they are free of remnant toxic solvents and precursor molecules, potentially lowering the barrier to clinical success.

On-demand inkjet-printed microdisk laser with air cladding by liquid flow microetching

We have novelly, to the best of our knowledge, developed the liquid flow microetching method that can treat a single microdisk in a microregion with precise position control for inkjet-printed microdisk lasers. The injection-drain wet etching setup consisted of two microneedles that successfully performed a formation of a fine undercut structure of an inkjet-printed microdisk on a pre-pedestal layer through the individual wet etching process. Then measurement of the undercut structure using scanning electron microscopy and lasing characteristics with whispering gallery modes were carried out to demonstrate performance of the etched microdisks. The measured lasing threshold decreased by half compared with that of the unetched microdisk directly printed on a fluorine-type film. A point to note is that this etching method exhibits an excellent undercut and lasing characteristics even when using a clad pre-pedestal layer having a refractive index higher than that of core microdisks. This technique, combined with inkjet printing, offers a powerful tool for individually designing a microdisk and can help develop novel devices that comprise several inkjet-printed microdisks being evanescently coupled.

Ultrasensitive optofluidic enzyme-linked immunosorbent assay by on-chip integrated polymer whispering-gallery-mode microlaser sensors

Optical whispering-gallery-mode (WGM) microcavities offer great promise in ultrasensitive biosensors because of their unique ability to enable resonant recirculation of light to achieve strong light-matter interactions in microscale volumes. However, it remains a challenge to develop cost-effective, high-performance WGM microcavity-based biosensing devices for practical disease diagnosis applications. In this paper, we present an optofluidic chip that is integrated with directly-printed, high-quality-factor (Q) polymer WGM microlaser sensors for ultrasensitive enzyme-linked immunosorbent assay (ELISA). Optical 3D μ-printing technology based on maskless ultraviolet lithography is developed to rapidly fabricate high-Q suspended-disk WGM microcavities. After deposition with a thin layer of optical gain material, low-threshold WGM microlasers are fabricated and then integrated together with optical fibres upon a microfluidic chip to achieve an optofluidic device. With flexible microfluidic technology, on-chip, integrated, WGM microlasers are further modified in situ with biomolecules on surface for highly selective biomarker detection. It is demonstrated that such an optofluidic biochip can measure horseradish peroxidase (HRP)-streptavidin, which is a widely used catalytic molecule in ELISA, via chromogenic reaction at the concentration level of 0.3 ng mL-1. Moreover, it enables on-chip optofluidic ELISA of the disease biomarker vascular endothelial growth factor (VEGF) at the extremely low concentration level of 17.8 fg mL-1, which is over 2 orders of magnitude better than the ability of current commercial ELISA kits.

Hyperboloid-Drum Microdisk Laser Biosensors for Ultrasensitive Detection of Human IgG

Whispering gallery mode (WGM) microresonators have been used as optical sensors in fundamental research and practical applications. The majority of WGM sensors are passive resonators that require complex systems, thereby limiting their practicality. Active resonators enable the remote excitation and collection of WGM-modulated fluorescence spectra, without requiring complex systems, and can be used as alternatives to passive microresonators. This paper demonstrates an active microresonator, which is a microdisk laser in a hyperboloid-drum (HD) shape. The HD microdisk lasers are a combination of a rhodamine B-doped photoresist and a silica microdisk. These HD microdisk lasers can be utilized for the detection of label-free biomolecules. The biomolecule concentration can be as low as 1 ag mL^-1 , whereas the theoretical detection limit of the biosensor for human IgG in phosphate buffer saline is 9 ag mL^-1 (0.06 a_M ). Additionally, the biosensors are able to detect biomolecules in an artificial serum, with a theoretical detection limit of 9 ag mL^-1 (0.06 a_M ). These results are approximately four orders of magnitude more sensitive than those for the typical active WGM biosensors. The proposed HD microdisk laser biosensors show enormous detection potential for biomarkers in protein secretions or body fluids.

Plasmonic Metasensors Based on 2D Hybrid Atomically Thin Perovskite Nanomaterials

In this work, we have designed highly sensitive plasmonic metasensors based on atomically thin perovskite nanomaterials with a detection limit up to 10⁻¹⁰ refractive index units (RIU) for the target sample solutions. More importantly, we have improved phase singularity detection with the Goos–Hänchen (GH) effect. The GH shift is known to be closely related to optical phase signal changes; it is much more sensitive and sharp than the phase signal in the plasmonic condition, while the experimental measurement setup is much more compact than that of the commonly used interferometer scheme to exact the phase signals. Here, we have demonstrated that plasmonic sensitivity can reach a record-high value of 1.2862 × 10⁹ µm/RIU with the optimum configurations for the plasmonic metasensors. The phase singularity-induced GH shift is more than three orders of magnitude larger than those achievable in other metamaterial schemes, including Ag/TiO₂ hyperbolic multilayer metamaterials (HMMs), metal–insulator–metal (MIM) multilayer waveguides with plasmon-induced transparency (PIT), and metasurface devices with a large phase gradient. GH sensitivity has been improved by more than 10⁶ times with the atomically thin perovskite metasurfaces (1.2862 × 10⁹ µm/RIU) than those without (918.9167 µm/RIU). The atomically thin perovskite nanomaterials with high absorption rates enable precise tuning of the depth of the plasmonic resonance dip. As such, one can optimize the structure to reach near zero-reflection at the resonance angle and the associated sharp phase singularity, which leads to a strongly enhanced GH lateral shift at the sensor interface. By integrating the 2D perovskite nanolayer into a metasurface structure, a strong localized electric field enhancement can be realized and GH sensitivity was further improved to 1.5458 × 10⁹ µm/RIU. We believe that this enhanced electric field together with the significantly improved GH shift would enable single molecular or even submolecular detection for hard-to-identify chemical and biological markers, including single nucleotide mismatch in the DNA sequence, toxic heavy metal ions, and tumor necrosis factor-α (TNFα).

Reconfigurable Integrated Optofluidic Droplet Laser Arrays

Optofluidic lasers are an emerging technology for the development of miniaturized light sources and biological and chemical sensors. However, most optofluidic lasers demonstrated to date are operated at the single optical cavity level, which limits their applications in high-throughput biochemical sensing, high-speed wavelength switching, and on-chip spectroscopic analysis. Here, we demonstrated an optofluidic droplet laser array on a silicon chip with integrated microfluidics, in which four individual droplet optical cavities are generated and controlled by a 2 × 2 nozzle array. Arrays of droplets with a diameter ranging from 115 to 475 μm can be generated, removed, and regenerated on demand. The lasing threshold of the droplet laser array is in the range of 0.63-2.02 μJ/mm². An image-based lasing threshold analysis method is developed, which enables simultaneous lasing threshold measurement for all laser units within the laser array using a low-cost camera. Compared to the conventional spectrum-based threshold analysis method, the lasing threshold obtained from the image-based method showed consistent results. Our droplet laser array is a promising technology in the development of cost-effective and integrated coherent light source on a chip for point-of-care applications.

On-chip label-free biosensing based on active whispering gallery mode resonators pumped by a light-emitting diode

Biosensing based on whispering-gallery mode (WGM) resonators has been continuously studied with great attention due to its excellent sensitivity guaranteeing the label-free detection. However, its practical impact is insignificant to date despite notable achievements in academic research. Here, we demonstrate a novel practical platform of on-chip WGM sensors integrated with microfluidic channels. By placing silicon nanoclusters as a stable active compound in micro-resonators, the sensor chip can be operated with a remote pump and readout, which simplifies the chip integration and connection to the external setup. In addition, silicon nanoclusters having large absorption cross-section over broad wavelength range allow active sensing for the first time with an LED pump in a top-illumination scheme which significantly reduces the complexity and cost of the measurement setup. The nano-slot structure of 25 nm gap width is embedded in the resonator where the target bio-molecules are selectively detected with the sensitivity enhanced by strongly confined mode-field. The sensitivity confirmed by real-time measurements for the streptavidin-biotin complex is 0.012 nm/nM, improved over 20 times larger than the previously reported WGM sensors with remote readout.

Functional lasing microcapillaries for surface-specific sensing

Lasing-based sensors have several advantages over fluorescent devices, specifically related to the high light intensity and narrow mode linewidth that can improve the speed and accuracy of the sensor performance. In this work, a microcapillary-based lasing sensor is demonstrated, in which the lasing wavelengths are sensitive to the surface binding of specific materials. In order to achieve this, we utilized lasing into the "star" and "triangle" modes of a conventional microcapillary and tracked the mode positions after the deposition of a polyelectrolyte tri-layer and the subsequent amide binding of carboxy-functionalized polystyrene microspheres. While the lasing mode spectrum becomes increasingly complicated by the addition of the surface layers, careful mode selection can be used to monitor the layer-by-layer surface binding in a mechanically and optically robust device. For polystyrene microspheres, the detection limits were 9.75 nM based upon the lasing mode shift, which compares favorably with fluorescence-based devices. The methods presented in this work could readily be extended to other surface binding schemes and lasing wavelengths, showing that capillary microlasers could be used for many potential applications that capitalize on stable lasing-based detection methods.

On-Chip Real-Time Chemical Sensors Based on Water-Immersion-Objective Pumped Whispering-Gallery-Mode Microdisk Laser

Optical whispering-gallery-mode (WGM) microresonator-based sensors with high sensitivity and low detection limit down to single unlabeled biomolecules show high potential for disease diagnosis and clinical application. However, most WGM microresonator-based sensors, which are packed in a microfluidic cell, are a "closed" sensing configuration that prevents changing and sensing the surrounding liquid refractive index (RI) of the microresonator immediately. Here, we present an "open" sensing configuration in which the WGM microdisk laser is directly covered by a water droplet and pumped by a water-immersion-objective (WIO). This allows monitoring the chemical reaction progress in the water droplet by tracking the laser wavelength. A proof-of-concept demonstration of chemical sensor is performed by observing the process of salt dissolution in water and diffusion of two droplets with different RI. This WIO pumped sensing configuration provides a path towards an on-chip chemical sensor for studying chemical reaction kinetics in real time.