Video-rate centimeter-range optical coherence tomography based on dual optical frequency combs by electro-optic modulators

Electronic frequency shifting enables long, variable working distance optical coherence tomography

Increased imaging range is of growing interest in many applications of optical coherence tomography to reduce constraints on sample location, size, and topography. The design of optical coherence tomography systems with sufficient imaging range (e.g., 10s of centimeters) is a significant challenge due to the direct link between imaging range and acquisition bandwidth. We have developed a novel and flexible method to extend the imaging range in optical coherence tomography using electronic frequency shifting, enabling imaging in dynamic environments. In our approach, a laser with a quasi-linear sweep is used to limit the interferometric bandwidth, enabling decoupling of imaging range and acquisition bandwidth, while a tunable lens allows dynamic refocusing in the sample arm. Electronic frequency shifting then removes the need for high frequency digitization. This strategy is demonstrated to achieve high contrast morphological imaging over a > 21 cm working distance range, while maintaining high resolution and phase sensitivity. The system design is flexible to the application while requiring only a simple phase correction in post-processing. By implementing this approach in an auto-focusing paradigm, the proposed method demonstrates strong potential for the translation of optical coherence tomography into emerging applications requiring variable and centimeter-scale imaging ranges.

Dual-comb based time-stretch optical coherence tomography for large and segmental imaging depth

Optical coherence tomography based on time-stretch enables high frame rate and high-resolution imaging for the inertia-free wavelength-swept mechanism. The fundamental obstacle is still the acquisition bandwidth's restriction on imaging depth. By introducing dual-comb with slightly different repetition rates, the induced Vernier effect is found to be capable of relieving the problem. In our work, a dual-comb based time-stretch optical coherence tomography is proposed and experimentally demonstrated, achieving a 1.5-m imaging depth and 200-kHz A-scan rate. Moreover, about a 33.4-µm resolution and 25-µm accuracy are achieved. In addition, by adjusting the frequency detuning of the dual-comb, the A-scan rate can be further boosted to video-rate imaging. With enlarged imaging depth, this scheme is promising for a wide range of applications, including light detection and ranging.

Flat Optical Frequency Comb Generation Based on Monolithic Integrated LNOI Intensity and Phase Modulator

A flat optical frequency comb (OFC) is generated by using a monolithic integrated electro-optic intensity and phase modulator fabricated on lithium niobite on insulator (LNOI) platform. The LNOI-based modulation chip consists of a push–pull Mach–Zehnder modulator (MZM) and a U-shaped phase modulator (PM) connected by a curved optical waveguide. Microwave and optical packaging are implemented for the modulation chip, where the input and output pigtails of the packaged modulation device are polarization-maintaining fibers, with a core diameter of 6.5 μm. The packaged LNOI-based modulation device is featured by a fiber-to-fiber insertion loss as low as 6.97 dB. The half-wave voltages of the MZM and the PM are measured to be 3.6 V and 3.4 V at 5 GHz, respectively. By using the modulation device, an OFC with a tooth spacing of 5 GHz is generated, and the 13 comb teeth in the generated OFC are with a power flatness of 2.4 dB. The measured results of this device indicate that the tooth spacing of the generated OFC can be extended to tens of gigahertz by using a microwave source with a higher output frequency. In addition, the number of the comb teeth can be enhanced beyond 20 by increasing the power of the radio-frequency signal applied to the PM or by further reducing the half-wave voltage of the PM.

Deep learning for digital holography: a review

Recent years have witnessed the unprecedented progress of deep learning applications in digital holography (DH). Nevertheless, there remain huge potentials in how deep learning can further improve performance and enable new functionalities for DH. Here, we survey recent developments in various DH applications powered by deep learning algorithms. This article starts with a brief introduction to digital holographic imaging, then summarizes the most relevant deep learning techniques for DH, with discussions on their benefits and challenges. We then present case studies covering a wide range of problems and applications in order to highlight research achievements to date. We provide an outlook of several promising directions to widen the use of deep learning in various DH applications.

Rapid optical tomographic vibrometry using a swept multi-gigahertz comb

We propose a rapid tomographic vibrometer technique using an optical comb to measure internal vibrations, transient phenomena, and tomographic distributions in biological tissue and microelectromechanical system devices at high frequencies. This method allows phase-sensitive tomographic measurement in the depth direction at a multi-MHz scan rate using a frequency-modulated broadband electrooptic multi-GHz supercontinuum comb. The frequency spacing was swept instantaneously in time and axisymmetrically about the center wavelength via a dual-drive Mach-Zehnder modulator driven by a variable radio frequency signal. This unique sweeping method permits direct measurement of fringe-free interferometric amplitude and phase with arbitrarily changeable measurement range and scan rate. Therefore, a compressive measurement can be made in only the depth region where the vibration exists, reducing the number of measurement points. In a proof-of-principle experiment, the interferometric amplitude and phase were investigated for in-phase and quadrature phase-shifted interferograms obtained by a polarization demodulator. Tomographic transient displacement measurements were performed using a 0.12 mm thick glass film and piezo-electric transducer oscillating at 10-100 kHz with scan rates in the range 1-20 MHz. The depth resolution and precision of the vibrometer were estimated to be approximately 25 µm and 1.0 nm, respectively.

Hybrid integrated mode-locked laser diodes with a silicon nitride extended cavity

Integrated semiconductor mode-locked lasers have shown promise in many applications and are readily fabricated using generic InP photonic integration platforms. However, the passive waveguides offered in such platforms have relatively high linear and nonlinear losses that limit the performance of these lasers. By extending such lasers with, for example, an external cavity, the performance can be increased considerably. In this paper, we demonstrate for the first time that a high-performance mode-locked laser can be achieved with a butt-coupling integration technique using chip scale silicon nitride waveguides. A platform-independent SiN/SU8 coupler design is used to couple between the silicon nitride external cavity and the III/V active chip. Mode-locked lasers at 2.18 GHz and 15.5 GHz repetition rates are demonstrated with Lorentzian RF linewidths several orders of magnitude smaller than what has been demonstrated on monolithic InP platforms. The RF linewidth was 31 Hz for the 2.18 GHz laser.

Sub-100 fs all-fiber broadband electro-optic optical frequency comb at 1.5 µm

A sub-100 fs all-fiber broadband optical frequency comb seeded from a 12.5 GHz electro-optic modulated pulse is presented. Combining pulse reshaping, nonlinear mixing with dispersion compensation processes, a frequency comb with the main pulse width of 86 fs was achieved. The frequency comb has a 6 dB spectral bandwidth spanning over 150 nm which corresponding to more than 1500 comb tones. The measured average power of the broadband comb is over 550 mW, and the calculated average power of each comb line is roughly -4 dBm. To illustrate the whole spectral broadening process, a numerical investigation was also brought out, showing a very good match with the experiments. With a delayed self-heterodyne interferometer, the evolutions of the seed comb linewidths and the broadened comb linewidths were measured revealing the same parabolic trend. Specifically, the linewidths of the 20 seed comb lines are less than 10 kHz, while the linewidths of the 400 broadened comb lines are less than 1 MHz. The results also indicate that the nonlinear mixing led to an accumulation of the phase noise with respect to the comb line number, indicating that a low phase noise RF source or phase locking technique is essential to produce ultra-low phase noise broadband electro-optic combs.

Unveiling femtosecond rogue-wave structures in noise-like pulses by a stable and synchronized time magnifier

Mode-locked fiber lasers are an ideal platform for an ultrafast nonlinear physics study, and they have shown many intriguing, yet not fully understood, phenomena such as the optical rogue waves (ORWs) and noise-like pulses (NLPs). However, one of the major obstacles in the study of fiber laser dynamics is the lack of practical measurement techniques for round-trip tracking, and single-shot, real-time observation in the time domain at sub-picosecond (ps) resolution. Here we demonstrate an automatically synchronized characterization of NLPs using a parametric time magnifier. The round-trip evolution of ultrafast temporal structures in the noise-like pulses has been experimentally resolved at sub-ps resolution, to the best of our knowledge, for the first time, and ORWs have been identified.