Above and beyond: holographic tracking of axial displacements in holographic optical tweezers

Improving the Signal-to-Noise Ratio of Axial Displacement Measurements of Microspheres Based on Compound Digital Holography Microscopy Combined with the Reconstruction Centering Method

In 3D microsphere tracking, unlike in-plane motion that can be measured directly by a microscope, axial displacements are resolved by optical interference or a diffraction model. As a result, the axial results are affected by the environmental noise. The immunity to environmental noise increases with measurement accuracy and the signal-to-noise ratio (SNR). In compound digital holography microscopy (CDHM)-based measurements, precise identification of the tracking marker is critical to ensuring measurement precision. The reconstruction centering method (RCM) was proposed to suppress the drawbacks caused by installation errors and, at the same time, improve the correct identification of the tracking marker. The reconstructed center is considered to be the center of the microsphere, rather than the center of imaging in conventional digital holographic microscopy. This method was verified by simulation of rays tracing through microspheres and axial moving experiments. The axial displacements of silica microspheres with diameters of 5 μm and 10 μm were tested by CDHM in combination with the RCM. As a result, the SNR of the proposed method was improved by around 30%. In addition, the method was successfully applied to axial displacement measurements of overlapped microspheres with a resolution of 2 nm.

Aberration compensation for enhanced holographic particle characterization

Holographic particle characterization treats holographic microscopy of colloidal particles as an inverse problem whose solution yields the diameter, refractive index and three-dimensional position of each particle in the field of view, all with exquisite precision. This rich source of information on the composition and dynamics of colloidal dispersions has created new opportunities for fundamental research in soft-matter physics, statistical physics and physical chemistry, and has been adopted for product development, quality assurance and process control in industrial applications. Aberrations introduced by real-world imaging conditions, however, can degrade performance by causing systematic and correlated errors in the estimated parameters. We identify a previously overlooked source of spherical aberration as a significant source of these errors. Modeling aberration-induced distortions with an operator-based formalism identifies a spatially varying phase factor that approximately compensates for spherical aberration in recorded holograms. Measurements on model colloidal dispersions demonstrate that phase-only aberration compensation greatly improves the accuracy of holographic particle characterization without significantly affecting measurement speed for high-throughput applications.

Zero-order free holographic optical tweezers

Holographic optical tweezers (HOTs) use spatial light modulators (SLM) to modulate light beams, thereby enabling the dynamic control of optical trap arrays with complex intensity and phase distributions. This has provided exciting new opportunities for cell sorting, microstructure machining, and studying single molecules. However, the pixelated structure of the SLM will inevitably bring up the unmodulated zero-order diffraction possessing an unacceptably large fraction of the incident light beam power. This is harmful to optical trapping because of the bright, highly localized nature of the errant beam. In this paper and to address this issue, we construct a cost-effective, zero-order free HOTs apparatus, thanks to a homemade asymmetric triangle reflector and a digital lens. As there is no zero-order diffraction, the instrument performs excellently in generating complex light fields and manipulating particles.

Multi-angle holographic characterization of individual fractal aggregates

Holographic particle characterization uses quantitative analysis of holographic microscopy data to precisely and rapidly measure the diameter and refractive index of individual colloidal spheres in their native media. When this technique is applied to inhomogeneous or aspherical particles, the measured diameter and refractive index represent properties of an effective sphere enclosing each particle. Effective-sphere analysis has been applied successfully to populations of fractal aggregates, yielding an overall fractal dimension for the population as a whole. Here, we demonstrate that holographic characterization also can measure the fractal dimensions of an individual fractal cluster by probing how its effective diameter and refractive index change as it undergoes rotational diffusion. This procedure probes the structure of a cluster from multiple angles and thus constitutes a form of tomography. Here we demonstrate and validate this effective-sphere interpretation of aspherical particles' holograms through experimental studies on aggregates of silica nanoparticles grown under a range of conditions.

Dexterous holographic trapping of dark-seeking particles with Zernike holograms

The intensity distribution of a holographically-projected optical trap can be tailored to the physical properties of the particles it is intended to trap. Dynamic optimization is especially desirable for manipulating dark-seeking particles that are repelled by conventional optical tweezers, and even more so when dark-seeking particles coexist in the same system as light-seeking particles. We address the need for dexterous manipulation of dark-seeking particles by introducing a class of "dark" traps created from the superposition of two out-of-phase Gaussian modes with different waist diameters. Interference in the difference-of-Gaussians (DoG) trap creates a dark central core that is completely surrounded by light and therefore can trap dark-seeking particles rigidly in three dimensions. DoG traps can be combined with conventional optical tweezers and other types of traps for use in heterogeneous samples. The ideal hologram for a DoG trap being purely real-valued, we introduce a general method based on the Zernike phase-contrast principle to project real-valued holograms with the phase-only diffractive optical elements used in standard holographic optical trapping systems. We demonstrate the capabilities of DoG traps (and Zernike holograms) through experimental studies on high-index, low-index and absorbing colloidal particles dispersed in fluid media.

Spirally rotating particles with structured beams generated by phase-shifted zone plates

The emerging field of structured beams has led to optical manipulation with tremendous progress. Beyond various methods for structured beams, we use phase-shifted zone plates known as beam-shaping diffractive optical elements to generate beams whose phase exclusively or both phase and intensity are twisted along a curve. These beams can trap and guide particles on open curved trajectories for continuous motion, not necessarily requiring a closed symmetric intensity distribution. We show the feasibility and versatility of the proposed method as a promising technique in optical manipulation in which the trajectory of the spiral rotation and the rate of rotation of trapped particles can be controlled.

CATCH: Characterizing and Tracking Colloids Holographically Using Deep Neural Networks

In-line holographic microscopy provides an unparalleled wealth of information about the properties of colloidal dispersions. Analyzing one colloidal particle's hologram with the Lorenz-Mie theory of light scattering yields the particle's three-dimensional position with nanometer precision while simultaneously reporting its size and refractive index with part-per-thousand resolution. Analyzing a few thousand holograms in this way provides a comprehensive picture of the particles that make up a dispersion, even for complex multicomponent systems. All of this valuable information comes at the cost of three computationally expensive steps: (1) identifying and localizing features of interest within recorded holograms, (2) estimating each particle's properties based on characteristics of the associated features, and finally (3) optimizing those estimates through pixel-by-pixel fits to a generative model. Here, we demonstrate an end-to-end implementation that is based entirely on machine-learning techniques. Characterizing and Tracking Colloids Holographically (CATCH) with deep convolutional neural networks is fast enough for real-time applications and otherwise outperforms conventional analytical algorithms, particularly for heterogeneous and crowded samples. We demonstrate this system's capabilities with experiments on free-flowing and holographically trapped colloidal spheres.

Large depth-of-field tracking of colloidal spheres in holographic microscopy by modeling the objective lens

Holographic microscopy has developed into a powerful tool for 3D particle tracking, yielding nanometer-scale precision at high frame rates. However, current particle tracking algorithms ignore the effect of the microscope objective on the formation of the recorded hologram. As a result, particle tracking in holographic microscopy is currently limited to particles well above the microscope focus. Here, we show that modeling the effect of an aberration-free lens allows tracking of particles above, near, and below the focal plane in holographic microscopy, doubling the depth of field. Finally, we use our model to determine the conditions under which ignoring the effect of the lens is justified and in what conditions it leads to systematic errors.