Gain-switched semiconductor lasers with pulsed excitation and optical injection for dual-comb spectroscopy

Microresonator-based spectral translation of a gain-switched semiconductor laser comb

Gain-switched semiconductor laser technology provides a simple and low-cost method to generate optical frequency combs. However, the spectral coverage of these compact comb sources has been limited to the near-infrared range. Here, we combine a gain-switched laser comb with a continuous-wave translation laser within a periodically poled lithium niobate microresonator and demonstrate efficient and broadband sum-frequency conversion, spectrally translating the near-infrared comb to the visible domain. The broadband nature of the nonlinear conversion arises from a chirping of the domain inversion grating period along the microresonator circumference. We also validate the coherence of the visible-wavelength comb teeth which underlines the general applicability of this spectral translation approach.

Tunable dual optical frequency comb at 2 μm for CO2 sensing

In this article, we demonstrate a dual frequency comb (DFC) based on the gain-switching of mutually injection-locked semiconductor lasers in the 2 μm wavelength region with a tunable free spectral range (FSR) between 500 MHz and 3 GHz. Through the down-conversion process enabled by DFCs, the beating spectra of the optical frequency combs were captured in a 15 MHz electrical bandwidth with high resolution and millisecond acquisition times. A first experimental demonstration of sensing CO₂ with this architecture is also presented.

An Investigation of All Fiber Free-Running Dual-Comb Spectroscopy

A dual-comb spectroscopy (DCS) system uses two phase-locked optical frequency combs with a slight difference in the repetition frequency. The spectrum can be sampled in the optical frequency (OF) domain and reproduces the characteristics in the radio frequency (RF) domain through asynchronous optical sampling. Therefore, the DCS system shows great advantages in achieving precision spectral measurement. During application, the question of how to reserve the mutual coherence between the two combs is the key issue affecting the application of the DCS system. This paper focuses on a software algorithm used to realize the mutual coherence of the two combs. Therefore, a pair of free-running large anomalous dispersion fiber combs, with a center wavelength of approximately 1064 nm, was used. After the signal process, the absorption spectra of multiple species were simultaneously obtained (simulated using the reflective spectra of narrow-bandwidth fiber Bragg gratings, abbreviated as FBG). The signal-to-noise ratio (SNR) could reach 13.97 dB (25) during the 100 ms sampling time. In this study, the feasibility of the system was first verified through the simulation system; then, a principal demonstration experiment was successfully executed. The whole system was connected by the optical fiber without additional phase-locking equipment, showing promise as a potential solution for the low-cost and practical application of DCS systems.

Dual electro-optic comb spectroscopy using a single pseudo-randomly driven modulator

We present a dual-comb scheme based on a single intensity modulator driven by inexpensive board-level pseudo-random bit sequence generators. The result is a simplified architecture that exhibits a long mutual coherence time (up to 50 s) with no need of stabilization feedback loops or self-correction algorithms. Unlike approaches that employ ultrafast arbitrary waveform generators, our scheme makes it possible to produce long interferograms in the time domain, reducing the difference in the line spacing of the combs even below the hertz level. In order to check the system accuracy, we report two spectroscopic measurements with a frequency sampling of 140 MHz. All these results are analyzed and discussed to evaluate the potential of our scheme to implement a field-deployable dual-comb generator.

Gain-switched dual frequency comb at 2 µm

This article shows a dual frequency comb in the 2 µm wavelength region using mutually injection locked gain-switched semiconductor lasers. Strained InGaAs multi-quantum-well discrete mode lasers and gain switching were used to generate two optical frequency combs with repetition rates of 2 GHz and 2.0001 GHz respectively, centred at 2.002 µm. Each optical comb spanned approximately 100 GHz. Through mutual injection locking to an edge comb line common in both combs, a phase locked dual frequency comb was demonstrated with 44 beating tones unique to single comb line pair interactions. This scheme allows for the comb information to be compressed into a 5 MHz detection bandwidth and captured with millisecond acquisition times, which could be of benefit to a number of sensing applications.

Tailoring frequency combs through VCSEL polarization dynamics

We investigate experimentally the nonlinear polarization dynamics of a VCSEL subject to optical injection of a frequency comb. By tuning the polarization of the injected comb to be orthogonal to that of the VCSEL, we demonstrate the generation of either a single polarization or a dual polarization frequency comb. The injection parameters (injected power and detuning frequency) are then used either to generate harmonics of the initial comb spacing or to increase the number of total output frequency lines up to 15 times the number of injected comb lines. Optimisation of the injection parameters yields a comb extending over 60 GHz for a comb spacing of 2 GHz with a carrier to noise ratio (CNR) of up to 60 dB. Our technique allows us to separately control the comb spacing, comb bandwidth, CNR and polarization. Our finding can be used for spectroscopy measurement and also for polarization division multiplexing in optical data communications.

Generation of a dual optical frequency comb by large signal modulation of a semiconductor laser

In this paper, we present and theoretically investigate a simple and power efficient scheme for dual optical frequency comb generation residing on a single directly modulated semiconductor laser driven by two superimposed current waveforms. Our detailed model estimates dual combs comprising teeth pairs within 20 dB margin spanning up to 116 GHz with power per teeth pair up to 8.8 µW. In addition, we report dual combs with 40 GHz span comprising ultraflat teeth pairs, with flatness of the order of 1 dB.

Wideband and high-resolution spectroscopy based on an ultra-fine electro-optic frequency comb with seed lightwave selection via injection locking

The digital ultra-fine electro-optic frequency comb (UFEOFC) enables high-resolution spectroscopy in various applications with a limited bandwidth. In this Letter, we propose a novel, to the best of our knowledge, UFEOFC-based dual-comb spectroscopy to realize megahertz resolution and broadened bandwidth. An UFEOFC with 1 MHz line-spacing and 18 GHz bandwidth is generated and resolved in a dual-comb interferometer working in quasi-integer-ratio mode. One line selected from a master EOFC with 18 GHz line-spacing via optical injection locking serves as the seed lightwave. Successive selection of 20 lines realizes wideband measurement covering 360 GHz, and a reflectance spectrum of a phase-shift fiber Bragg grating is obtained in the demonstration. A spectrum with 360,000 lines is demodulated in 26 ms due to the low injection lock dead time set to be 300µs between adjacent lines, by which the figure of merit reaches 3.39×10⁷. The system promotes more prospects in practical spectroscopic and sensing applications.