Ultra-broadband and ultra-compact polarization beam splitter based on a tapered subwavelength-grating waveguide and slot waveguide

Polarization manipulation on step-index composite polymer beam splitters for photonics circuitry

This paper presents composite beam splitters realized with polymer materials for developing photonic integrated circuits. We used organic-inorganic hybrid polymer materials to form this composite beam splitter realized with step-index (SI) core profiles. We used the alternating direction implicit technique of the Rsoft CAD BeamPROP solver to design and analyze these beam splitters. We successfully examined and manipulated the beam splitter's polarization dependency to obtain a 99% output efficiency with a 50:50 splitting ratio. The SI beam splitter exhibits an excess loss of 0.014 dB. When we apply polarized light in this beam splitter, the excess loss increases to 2 dB, and this loss gradually decreases as the angle of incident light increases. The excess loss reduces to 0.05 dB at the 31-degree angles of the incident polarized light. We also investigated the crosstalk of this beam splitter by varying the wavelength, and it is evident that the lowest crosstalk is -19.77 dB at the polarized angle of 31°.

Compact reconfigurable on-chip polarization beam splitters enabled by phase change material

In this paper, we present the design of a compact reconfigurable polarization beam splitter (PBS) enabled by ultralow-loss phase-changing Sb2Se3. By harnessing the phase-change-mediated mode coupling in a directional coupler (DC), guided light with different polarizations could be routed into different paths and this routing could be dynamically switched upon the phase change of Sb2Se3. With an optimized DC region, the proposed PBS demonstrates efficient polarization splitting with crosstalk less than -21.3 dB and insertion loss less than 0.16 dB at 1550 nm for both phase states of Sb2Se3, and features energy efficient property benefitting from the nonvolatile phase change of Sb2Se3, which holds great potentials for on-chip applications involving polarization control, including polarization-division multiplexing system, quantum photonics, microwave photonics, etc.

Compact hybrid five-mode multiplexer based on asymmetric directional couplers with constant bus waveguide width

We experimentally demonstrate a hybrid mode division multiplexer (MDM) based on asymmetric directional couplers (ADCs) without transition tapers in between. The proposed MDM can couple five fundamental modes from access waveguides into the bus waveguide as the hybrid modes (TE₀, TE₁, TE₂, TM₀, and TM₁). To eliminate the transition tapers between cascaded ADCs as well as to enable arbitrary add-drop to the bus waveguide, we maintain the bus waveguide width to be the same, while a partially etched subwavelength grating is introduced to reduce the effective refractive index of the bus waveguide. The experimental results demonstrate a working bandwidth of up to 140 nm.

High extinction ratio and an ultra-broadband polarization beam splitter in silicon integrated photonics by employing an all-dielectric metamaterial cladding

In silicon and other photonic integrated circuit platforms many devices exhibit a large polarization dependency, therefore a polarization beam splitter (PBS) is an essential building block to split optical signal to transversal electric (TE) and transversal magnetic (TM) modes. In this paper we propose a concept of integrated silicon-based PBS exploiting unique properties of all dielectric metamaterial cladding to achieve a high extinction ratio (ER) and wide bandwidth (BW) polarization splitting characteristics. We start from a structure (PBS-1) based on a directional coupler with metamaterial cladding combined with a bent waveguide with metamaterial cladding at the outer side in the role of a TE polarizer at the Thru port of the device. To increase BW we propose the improved concept (PBS-2) - a metamaterial compact dual Mach-Zehnder Interferometer structure in combination with the TE polarizer. Numerical simulations reveal that an exceptionally high ER over 35 dB can be achieved in a BW of 263 nm with insertion loss (IL) below 1 dB in case of PBS-2. The designed device has a footprint of 82 µm. Measurement results reveal that an ER > 30 dB is achievable in a BW of at least 140 nm (limited by the laser tuning range).

Design of an ultra-broadband and low-loss 3 dB power splitter from the 1.25 to 2.04 µm wave band

As a key component of the beam splitting and combining in photonic integrated circuits, an optical power splitter requires the characteristics of compactness, broadband, and low loss. Here, we propose a 1×2 ultra-broadband 3 dB power splitter with a 5 µm long beam splitting area, based on the structure of a subwavelength grating. The 0.45 dB bandwidth of the TE mode achieves 790 nm from 1.25 to 2.04 µm. This power splitter has a large fabrication tolerance, exceeding more than 30 nm (±15n m) and obtains the desired power ratio. It is suitable for high-speed and large-capacity communication, wavelength division multiplexing systems, and other multi-wave interconnection applications.

Ultra-Broadband and Highly Efficient Beam Splitter Based on Quasi-Continuous Metasurface in the Near-Infrared Region

Beam splitters are vital components in several optical systems. It is highly desirable, and compact beam splitters with ultra-broadband performances, high efficiencies, and large split angles are still being sought. In this paper, we demonstrate and numerically investigate an ultra-broadband and highly efficient optical beam splitter based on a quasi-continuous metasurface. The proposed design is constructed of quasi-continuous triangle-shaped gallium phosphide nanoantennas on a silica substrate. The simple structure can achieve a conversion efficiency and an anomalous transmission intensity above 90% and 0.8 covering the wavelength range of 1537-1826 nm, respectively. The maximum beam split angle in the operating bandwidth reaches 131.84° at the wavelength of 1826 nm. Particularly, the operating bandwidth is still as high as 125 nm with the anomalous transmission intensity above 0.92 and the conversion efficiency exceeding 99%. Moreover, the results show that the performance of the metasurface-based optical beam splitter can be further enhanced by optimizing structural parameters. We also demonstrate the adjustability of the beam splitter by adding refractive index (RI) materials on the surface of the device. The results show that the incident plane wave can be divided into three beams with intensity adjustability. The presented metasurface is very promising in the fields of multiplexers, interferometers, and optical communications, owing to its advantages of ultra-broadband, highly efficient, and large split angle simultaneously.

Simulation of a High-Performance Polarization Beam Splitter Assisted by Two-Dimensional Metamaterials

It is challenging to simultaneously consider device dimension, polarization extinction ratio (PER), insertion loss (IL), and operable bandwidth (BW) to design a polarization beam splitter (PBS) that is extensively used in photonic integrated circuits. The function of a PBS is to separate polarizations of light, doubling the transmission bandwidth in optical communication systems. In this work, we report a high-performance PBS comprising two-dimensional subwavelength grating metamaterials (2D SWGMs) between slot waveguides. The 2D SWGMs exhibited biaxial permittivity by tailoring the material anisotropy. The proposed PBS showed PERs of 26.8 and 26.4 dB for TE and TM modes, respectively, and ILs of ~0.25 dB for both modes, with an unprecedented small footprint of 1.35 μm × 2.75 μm working at the wavelength λ = 1550 nm. Moreover, the present structure attained satisfactory PERs of >20 dB and ILs of <0.5 dB within an ultrabroad BW of 200 nm.

Ultrahigh extinction ratio and ultra-low insertion loss silicon TE polarizer covering 1260-1675 nm bandwidth

An ultra-broadband TE polarizer with outstanding performance is proposed and demonstrated on a 220 nm-thick silicon-on-insulator platform. The proposed TE polarizer consists of six cascaded directional couplers assisted by subwavelength grating (SWG) structures and two Euler bends. The SWG is introduced to control the coupling strength of the fundamental TE and TM modes. Simulations show that our proposed TE polarizer possesses ultra-low insertion loss (IL < 0.3 dB) for the fundamental TE mode and an ultrahigh polarization extinction ratio (PER > 35 dB) for the fundamental TM mode covering all communication bands from 1260 nm to 1675 nm. The experimental results show that the fabricated TE polarizer has excellent performance of IL < 0.6 dB and PER > 35 dB over a 210 nm bandwidth, which is limited by the measurement equipment. To the best of our knowledge, our proposed TE polarizer is the first single-etched all-silicon TE polarizer with such high PER covering all communication bands.

Ultra-compact, efficient and high-polarization-extinction-ratio polarization beam splitters based on photonic anisotropic metamaterials

Anisotropic metameterials (AM) provide a new avenue for a next-generation silicon platform to design ultra-compact, densely integrated optical components, thus functional devices based on AM are drawing increasing attention recently. Here, we propose a novel efficient polarization beam splitter (PBS) with high polarization extinction ratio based on AM. An ultra-compact coupling region of 2.5 × 14 µm² is achieved by tailoring the AM structures, which can efficiently suppress the TE mode coupling, and enhance the TM mode coupling in the directional couplers simultaneously. The insertion loss is simulated to be as low as <0.2 dB within a bandwidth of 70 nm for both modes, and the polarization extinction ratio is as high as 46 dB and 33 dB for TE and TM modes, respectively. We also experimentally demonstrate the proposed PBS, with low insertion loss of 1 dB , high extinction ratio of >20 dB and wide operational bandwidth of >80 nm.

Tilted Nano-Grating Based Ultra-Compact Broadband Polarizing Beam Splitter for Silicon Photonics

An ultra-compact broadband silicon polarizing beam splitter is proposed based on a tilted nano-grating structure. A light cross coupling can be realized for transverse-magnetic mode, while the transverse-electric light can almost completely output from the through port. The length of the coupling region is only 6.8 μm, while an extinction ratio of 23.76 dB can be realized at a wavelength of 1550 nm. As a proof of concept, the device was fabricated by a commercial silicon photonic foundry. It can realize a 19.84 dB extinction ratio and an 80 nm working bandwidth with an extinction ratio of larger than 10 dB. The presented device also shows a good fabrication tolerance to the structure deviations, which is favorable for its practical applications in silicon photonics.