Highly reflective Ru/Y multilayer mirrors for the spectral range of 9-11 nm

Effects of interface-engineering on the internal structure and reflective characteristics of Cr/Sc multilayer mirrors

Record reflectivity's of REXP=23.8% at 3.14 nm and RCALC=30.8% at 3.12 nm have been obtained for Cr/Sc mirrors. Such increases in reflection are the result of decreases in mixing of the system layers with each other due to the use of interface-engineering methods - passivation of the already deposited Cr layer with nitrogen before deposition of the subsequent Sc layer. However, it has been found that adding additional B4C layers to such a system leads to a decrease in reflectivity.

Investigation of structural and reflective characteristics of short-period Mo/B4C multilayer X-ray mirrors

The results of a study of the structural and reflective characteristics of short-period multilayer X-ray mirrors based on Mo/B4C at wavelengths 1.54 Å, 9.89 Å and 17.59 Å are presented. The period of the samples varied in the range 8-35 Å. The average widths of the interfaces were ∼3.5 and 2.2 Å at one and the other boundaries, with a tendency for weak growth with any decrease in the period. The interlayer roughness was ∼1 Å. The research results indicate promising prospects for the use of multilayer Mo/B4C mirrors for synchrotron applications.

Highly reflective Ru/Sr multilayer mirrors for wavelengths 9-12 nm

The results of investigations of Ru/Sr multilayer coatings optimized for the spectral range of 9-12 nm are presented in this Letter. Such mirrors are promising optical elements for solar astronomy and for the development of beyond extreme ultraviolet (BEUV) lithography. A near-normal incidence reflectivity of up to 62.3% (λ = 11.4 nm) right after the synthesis is measured. The reflection coefficient decreases to 56.8% after five days of storage in air with a subsequent stabilization of its value. At a wavelength of λ = 9.34 nm, the reflection coefficient is 48.6% after two months of storage in air. To date, to the best of our knowledge, this is the highest reflectivity measured in this spectral range. The possibility of further increasing the reflectivity is discussed.