On-chip Ce:YIG/Si Mach-Zehnder optical isolator with low power consumption

On-Chip Broadband, Compact TM Mode Mach-Zehnder Optical Isolator Based on InP-on-Insulator Platforms

An integrated optical isolator is a crucial part of photonic integrated circuits (PICs). Existing optical isolators, predominantly based on the silicon-on-insulator (SOI) platform, face challenges in integrating with active devices. We propose a broadband, compact TM mode Mach-Zehnder optical isolator based on InP-on-insulator platforms. We designed two distinct magneto-optical waveguide structures, employing different methods for bonding Ce:YIG and InP, namely O2 plasma surface activation direct wafer bonding and DVS-benzocyclobutene (BCB) adhesive bonding. Detailed calculations and optimizations were conducted to enhance their non-reciprocal phase shift (NRPS). At a wavelength of 1550 nm, the direct-bonded waveguide structure achieved a 30 dB bandwidth of 72 nm with a length difference of 0.256 µm. The effects of waveguide arm length, fabrication accuracy, and dimensional errors on the device performance are discussed. Additionally, manufacturing tolerances for three types of lithographic processes were calculated, serving as references for practical manufacturing purposes.

Two Structural Designs of Broadband, Low-Loss, and Compact TM Magneto-Optical Isolator Based on GaAs-on-Insulator

Integrated optical isolators are important building blocks for photonic integrated chips. Despite significant advances in isolators integrated on silicon-on-insulator (SOI) platforms, integrated isolators on GaAs-on-insulator platforms are rarely reported. In this paper, two structural designs of optical isolators based on the TM basic mode of GaAs-on-insulator are proposed. The non-reciprocal phase shift (NRPS) of GaAs/Ce:YIG waveguides with different geometric structures are calculated using numerical simulation. The isolators achieve 35 dB isolation bandwidths greater than 53.5 nm and 70 nm at 1550 nm, with total insertion losses of 2.59 dB and 2.25 dB, respectively. A multi-mode interferometric (MMI) coupler suitable for these two structures is proposed. In addition, suitable manufacturing processes are discussed based on the simulated process tolerances.