All-optical intermodal switch using periodic coupling in a two-mode waveguide

Mode switching using optically induced long-period gratings: a theoretical analysis

We show that optically induced long-period grating (OLPG) is a particular case of inter-modal Bragg-scattering four-wave mixing (BS-FWM). To carry out such analysis, a vector model for the inter-modal BS-FWM was proposed and further tailored to investigate the energy transfer induced by OLPGs. Both processes, BS-FWM and OLPGs, have been proposed for in-line all-optical mode switching in transmission systems with space-division multiplexing (SDM). In this scope, we demonstrate that the bandwidth of OLPGs is larger than the BS-FWM. Furthermore, we show that OLPG-based mode switching can take place in two windows, if both pump beams are launched near the zero value of the differential mode-group delay, and the central wavelength and the bandwidth of such windows can be tuned by properly adjusting the wavelength and the optical power of the pump beams.

Ultrafast, all-optical control of modal phases in a few-mode fiber for all-optical switching

The phase differences between the transverse modes of an optical fiber can be altered all-optically by intermodal cross-phase modulation. In this Letter, we experimentally demonstrate this effect with ultrashort laser pulses. An ultrashort probe pulse, guided in both modes of a two-mode fiber, is co-propagating and temporally overlapping with an ultrashort control pulse, guided in the fundamental mode only and centered at a separate wavelength. The use of ultrashort pulses allows for a notable phase shift at a 33-fold reduced control pulse energy and a 173-fold reduced fiber length, compared to previous experiments. A total phase shift of 0.285π between the two probe modes was achieved at a 9 nJ control pulse energy in a 19 cm long two-mode graded-index fiber. Additionally, the capability of this scheme to switch ultrashort pulses in an all-optical manner was investigated. A modulation depth of 50% was achieved, limited by temporal nonlinear effects.

Design of waveguide grating with ultrafast tunable index contrast

A long-period waveguide grating (LPWG) with a tunable index contrast is proposed. The design features a simple configuration that consists of a two-mode waveguide formed on periodically poled lithium niobate with an angle with respect to its domain wall and a traveling-wave electrode. In the design, the electrical traveling wave introduces a periodic change in the refractive index of waveguide, which functions as a long-period waveguide grating that couples between symmetric and anti-symmetric core modes. The index contrast of grating can be controlled by the traveling-wave intensity. For application to ultrafast device, structural parameters satisfying velocity and impedance matching conditions are numerically calculated.

Bragg grating based biochemical sensor using submicron Si/SiO2 waveguides for lab-on-a-chip applications: a novel design

A novel biochemical sensor based on a submicrometer size, high core-cladding index difference, silica core Si-SiO(2) waveguide with a Bragg grating written in its cladding region is proposed and analyzed. Waveguide parameters are optimized to obtain maximum sensitivity, and for lower refractive index samples, an optimum core width is found to exist for both the TE and the TM mode configurations. Owing to the high index contrast at the Si-SiO(2) interface, the structure is much more sensitive while operating in the TM mode configuration, showing extremely high sensitivity [200-740 nm refractive index units (RIU)] for the ambient refractive indices between 1.33 and 1.63, which is of the order of most surface plasmon polariton (SPP) based biosensors. Further, unlike SPP based sensors, the proposed structure is free from any metallic layer or bulky prism and hence easy to realize. Owing to its simple structure and small dimensions, the proposed device could be easily integrated with planar lightwave circuits and could be used for lab-on-a-chip applications.

Strain effects on two-mode fiber gratings

The spectral, interferometric, and polarization properties of mode-coupling fiber gratings under strain are described. The grating is formed by photosensitivity that uses modal interference in the two-mode fiber. Theoretical and experimental results show the possibilities of using the fiber grating for optical switches, tunable filters, interferometric sensors, and polarizers.

Spatially weighted, grating-based, two-mode, elliptical-core optical fiber vibration sensors

Photoinduced refractive-index changes in two-mode, elliptical-core optical fibers affect the beat length and the sensor sensitivity. Chirped gratings are written by attaching such fibers to cantilever beams positioned in a strained state. We show that fibers with in-line chirped gratings, with the chirp being shaped in the form of a vibration-mode shape, can be used as spatially weighted fiber sensors for vibration analysis. We demonstrate enhanced detection of the first and second modes of vibration of a cantilever beam using this process; vibration mode suppression of the order of 10 dB is obtained.

Photoinduced refractive-index changes in two-mode, elliptical-core fibers: sensing applications

Photoinduced refractive-index changes in two-mode, elliptical-core optical fibers are shown to affect the differential phase modulation between the LP(01) and the LP(11)(even) modes. This change in beat length is dependent on the amount of strain induced in the fiber while the grating is being formed. We present experimental results that agree with conventional coupled-mode theory and propose the use of such sensors for weighted and distributed applications.