Zero-gap directional coupler switch integrated into a silicon-on insulator for 1.3-microm operation

Compact nonvolatile 2×2 photonic switch based on two-mode interference

On-chip nonvolatile photonic switches enabled by phase change materials (PCMs) are promising building blocks for power-efficient programmable photonic integrated circuits. However, large absorption loss in conventional PCMs (such as Ge₂Sb₂Te₅) interacting with weak evanescent waves in silicon waveguides usually leads to high insertion loss and a large device footprint. In this paper, we propose a 2×2 photonic switch based on two-mode interference in a multimode slot waveguide (MSW) with ultralow loss Sb₂S₃ integrated inside the slot region. The MSW supports two lowest order TE modes, i.e., symmetric TE₀₀ and antisymmetric TE₀₁ modes, and the phase of Sb₂S₃ could actively tune two-mode interference behavior. Owing to the enhanced electric field in the slot, the interaction strength between modal field and Sb₂S₃ could be boosted, and a photonic switch containing a ∼9.4 µm-long Sb₂S₃-MSW hybrid section could effectively alter the light transmission between bar and cross ports upon the phase change of Sb₂S₃ with a cross talk (CT) less than -13.6 dB and an insertion loss (IL) less than 0.26 dB in the telecommunication C-band. Especially at 1550 nm, the CT in the amorphous (crystalline) Sb₂S₃ is -36.1 dB (-31.1 dB) with a corresponding IL of 0.073 dB (0.055 dB). The proposed 2×2 photonic switch is compact in size and compatible with on-chip microheaters, which may find promising applications in reconfigurable photonic devices.

Time-Dependent, Optically Controlled Dielectric Function

We suggest optical modulation of the dielectric function of a molecular monolayer adsorbed on a metal surface as a potential means of controlling plasmon resonance phenomena. The dielectric function is altered using a laser pulse of moderate intensity and linear polarization to align the constituent molecules. After the pulse, the monolayer returns to its initial state. Time-dependent, optically controlled dielectric function is illustrated by molecular dynamics calculations.

Electro-optic routing in a nematic liquid-crystal waveguide

We propose a versatile guided-wave geometry encompassing electro-optic control for signal routing. A zero-gap directional coupler in liquid crystal can switch between two output states in the guide plane, permitting signal rerouting with modulation voltages as small as 70 mV. In the absence of an applied bias, no guiding--hence no modal output--is provided by the structure.