Generation of 520 mW pulsed blue light by frequency doubling of an all-fiberized 978 nm Yb-doped fiber laser source

Demonstration of hundred-watt-level near-diffraction-limited monolithic fiber laser near 980 nm with step-index double-cladding Yb-doped fiber

In this paper, a hundred-watt-level near-diffraction-limited step-index Yb-doped fiber (YDF) laser near 980 nm is demonstrated firstly, to the best of our knowledge. By using the 11.7-W 979-nm single-mode seed light, the in-band amplified spontaneous emission (ASE) is well suppressed and the maximum output power of 101.5 W with the beam quality (M2 factor) of 1.285 was obtained. This work does not only propose an effective method for the suppression of in-band ASE, but also provides a cost-effective solution of hundred-Watt-level near-diffraction-limited fiber lasers near 980 nm.

Potential application of a green fiber laser in laser display systems

This study explores the application of optical fiber lasers in display systems by integrating a P r3+-doped green all-fiber laser into a laser projection display system. As a control group to compare the results, a 520 nm semiconductor green laser diode module was integrated, similar to the experimental group. The color gamut and speckle performances were studied and compared. The results showed that the experimental group performed slightly better in the color gamut volume. The speckle contrast decreased rapidly in the experimental group when power increased. To our knowledge, this is the first study to apply a fiber laser to a laser display system. The results shed light on developing laser display systems with fewer or no speckle reduction elements.

Efficient single-frequency 972 nm Yb-doped fiber amplifier with core pumping and elevated temperature

In this work, we present a monolithic single-frequency, single-mode and polarization maintaining Yb-doped fiber (YDF) amplifier delivering up to 6.9 W at 972 nm with a high efficiency of 53.6%. Core pumping at 915 nm and elevated temperature of 300 °C were applied to suppress the unwanted 977 nm and 1030 nm ASE in YDF, so as to improve the 972 nm laser efficiency. In addition, the amplifier was further used to generate a single-frequency 486 nm blue laser with 590 mW of output power by single-pass frequency doubling.

Experimental Study on the In-Band Amplified Spontaneous Emission in the Single-Mode Continuous-Wave Yb-Doped Fiber Amplifier Operating near 980 nm

In this paper, the in-band amplified spontaneous emission (ASE) in the Yb-doped continuous-wave (CW) fiber amplifier operating near 980 nm is experimentally studied for the first time, to the best of our knowledge. A core-pumped single-mode Yb-doped fiber amplifier is fabricated and the effects of pump power, seed power, and active fiber length on the in-band ASE are investigated in the experiment. It is found that a strong in-band ASE around 980 nm can be observed even with no obvious ASE around 1030 nm present. It is also found that with the increment of pump power, the in-band ASE can be enhanced faster than the signal light. By studying the effects of seed power and active fiber length, it is found that, although increasing the seed power and shortening the active fiber can both suppress the in-band ASE, the latter method is less effective than the former one. The theoretical study is also carried out in order to understand the difference between the in-band ASE and 1030-nm ASE. The experimental observations are also discussed qualitatively with the theoretical results. We believe that the pertinent results and discussions can provide significant guidance for understanding the in-band ASE in the Yb-doped fiber amplifier operating near 980 nm.

Demonstration of kilowatt monolithic Yb-doped fiber laser operation near 980 nm

In this Letter, to the best of our knowledge, the first kilowatt monolithic Yb-doped fiber laser operating near 980 nm is demonstrated. The fiber laser is achieved with the help of an all-fiber amplifier fabricated with a 105/250-µm core/cladding-diameter double-cladding Yb-doped fiber. With 11-W seed light, about 1.11-kW output power was obtained with 65.3% slope efficiency. The center wavelength was around 978 nm with a 10-dB bandwidth of about 0.6 nm. About 34-dB suppression of 1030-nm amplified spontaneous emission was realized, and the output beam quality (M² factor) was about 16.2 at maximum output power. Better beam quality can be expected by optimizing the seed light and active fiber. This work can provide significant guidance for the study and designation of high-power fiber lasers operating near 980 nm and other three-level fiber sources.

Study on the power scalability of all-fiber superfluorescent source operating near 980 nm

The high-power all-fiber superfluorescent source operating near 980 nm is studied experimentally and numerically. In experiment, an all-fiber superfluorescent source operating near 980 nm is fabricated with the distributed side-coupled cladding-pumping (DSCCP) Yb-doped fiber (YDF). By optimizing the active fiber and angle-cleaving of the output port, a recorded 17.1-W output power and 14.6% slope efficiency of 980-nm ASE are obtained. No parasitic laser oscillation is observed at the maximum output power. The power scalability of the source is also numerically investigated. A simple but effective method is present to numerically determine the threshold of parasitic laser oscillation. It is found that the output power can be scaled up to 50 W and 100 W with the optical feedback of each output port suppressed to 1.2 × 10^-6 and 7 × 10^-7, respectively. It is also revealed that coupling coefficient should be larger than 6 to realize more than 50% slope efficiency. These results provide significant guidance for understanding and designing the high-power superfluorescent Yb-doped source (SYFS) operating near 980 nm and other sorts of three-level fiber sources.

High-power 1018 nm ytterbium-doped fiber laser and its application in tandem pump

In this paper, we present our experimental results of a high-power 1018 nm fiber laser and its usage in tandem pump. A record output power of 476 W 1018 nm fiber laser is obtained with an efficiency of 78.2%. Utilizing a specially designed gain fiber, a one-stage high-power monolithic fiber amplifier tandem pumped by six 1018 nm fiber lasers is assembled. A 110 W 1090 nm seed is amplified to 2140 W, and the efficiency is as high as 86.9%. The beam quality factor M2 is measured to be 1.9. Limitations and possible solutions for purchasing higher output power are discussed.

Fiber-integrated 780 nm source for visible parametric generation

We report the development of a fully fiber-integrated pulsed master oscillator power fibre amplifier (MOPFA) source at 780 nm, producing 3.5 W of average power with 410 ps pulses at a repetition rate of 50 MHz. The source consists of an intensity modulated 1560 nm laser diode amplified in an erbium fiber amplifier chain, followed by a fiber coupled periodically poled lithium niobate crystal module for frequency doubling. The source is then used for generating visible light through four-wave mixing in a length of highly nonlinear photonic crystal fiber: 105 mW at 668 nm and 95 mW at 662 nm are obtained, with pump to anti-Stokes conversion slope efficiencies exceeding 6% in both cases.