100 kHz, 100 ms, 400 J burst-mode laser with dual-wavelength diode-pumped amplifiers

Pre-Shaped Burst-Mode Hybrid MOPA Laser System at 10 kHz Pulse Frequency

A temporal pre-shaped burst-mode hybrid fiber-bulk laser system was illustrated at a 10 kHz rate with a narrow spectral linewidth. A theoretical model was proposed to counteract the temporal profile distortion and compensate for the desired one, based on reverse process of amplification. For uniformly modulated injection, amplified shapes were recorded and investigated in series for their varied pulse duration, envelope width and amplification delay, respectively. The pre-shaped output effectively realized a uniform distribution on a time scale for both the burst envelope and pulse shape under the action of the established theoretical method. Compared with previous amplification delay methods, this model possesses the capacity to extend itself for applications in burst-mode shaping with variable parameters and characteristics. The maximum pulse energy was enlarged up to 9.68 mJ, 8.94 mJ and 6.57 mJ with a 300 ns pulse duration over envelope widths of 2 ms to 4 ms. Moreover, the time-averaged spectral bandwidths were measured and characterized with Lonrentz fits of 68.3 MHz, 67.2 MHz and 67.7 MHz when the pulse duration varied from 100 ns to 300 ns.

Cavity-dumped burst-mode Nd:YAG laser master-oscillator power-amplifier system with a flat-top beam output realized by gain profile-controlled side pumping

We report a compact cavity-dumped burst-mode Nd:YAG laser master-oscillator power-amplifier system with a flat-top intensity distribution across the output-beam section. Custom-designed gain profile-controlled diode side pumping modules providing flat-top and concave gain profiles were utilized to generate a uniform beam profile and suppress thermal lensing during amplification, respectively. Bursts with an energy of 2.0 J and duration of 1.6 ms were operated at 10 Hz. Within the bursts, single pulses with an energy of 12.7 mJ and pulse width of 3.3 ns were achieved at 100 kHz.

Noncolinear optical parametric oscillator for broadband nanosecond pulse-burst CARS diagnostics in gases

Demonstration of broadband nanosecond coherent anti-Stokes Raman scattering (CARS) using a burst-mode-pumped noncolinear optical parametric oscillator (NOPO) has been achieved at a pulse repetition rate of 40 kHz. The NOPO is pumped with the 355-nm output of a burst-mode Nd:YAG laser at 50 mJ/pulse for 45 pulses and produces an output centered near 607 nm, with a bandwidth of 370 cm^-1 at energies of 5 mJ/pulse. A planar BOXCARS phase matching scheme uses the broadband NOPO output as the Stokes beam and the narrowband 532-nm burst-mode output for the two CARS pump beams for single-laser-shot nitrogen thermometry in near adiabatic H₂/air flames at temperatures up to 2200 K.

CH and NO planar laser-induced fluorescence and Rayleigh-scattering in turbulent flames using a multimode optical parametric oscillator

An optical parametric oscillator (OPO) is developed and characterized for the simultaneous generation of ultraviolet (UV) and near-UV nanosecond laser pulses for the single-shot Rayleigh scattering and planar laser-induced-fluorescence (PLIF) imaging of methylidyne (CH) and nitric oxide (NO) in turbulent flames. The OPO is pumped by a multichannel, 8-pulse Nd:YAG laser cluster that produces up to 225 mJ/pulse at 355 nm with pulse spacing of 100 µs. The pulsed OPO has a conversion efficiency of 9.6% to the signal wavelength of ∼430nm when pumped by the multimode laser. Second harmonic conversion of the signal, with 3.8% efficiency, is used for the electronic excitation of the A-X (1,0) band of NO at ∼215nm, while the residual signal at 430 nm is used for direct excitation of the A-X (0,0) band of the CH radical and elastic Rayleigh scattering. The section of the OPO signal wavelength for simultaneous CH and NO PLIF imaging is performed with consideration of the pulse energy, interference from the reactant and product species, and the fluorescence signal intensity. The excitation wavelengths of 430.7 nm and 215.35 nm are studied in a laminar, premixed CH₄-H₂-NH₃-air flame. Single-shot CH and NO PLIF and Rayleigh scatter imaging is demonstrated in a turbulent CH₄-H₂-NH₃ diffusion flame using a high-speed intensified CMOS camera. Analysis of the complementary Rayleigh scattering and CH and NO PLIF enables identification and quantification of the high-temperature flame layers, the combustion product zones, and the fuel-jet core. Considerations for extension to simultaneous, 10-kHz-rate acquisition are discussed.

Generation of high-energy, Gaussian laser pulses with tunable duration from 100 picoseconds to 1 millisecond

In this work, a variable-pulse-oscillator is developed and coupled with a burst-mode amplifier for generation of high-energy laser pulses with width of 100 ps to 1 ms and near-Gaussian temporal pulse shape. Pulse energy as high as 600 mJ is demonstrated at 1064 nm, with a super-Gaussian spatial profile and beam quality as good as 1.6 times the diffraction limit. A time-dependent pulse amplification model is developed and is in general agreement with experimentally measured values of output pulse energy and temporal pulse shape of the amplified pulses. Key performance parameters (pulse energy, temporal pulse shape, and spatial beam profile and quality) are analyzed as a function of pulse width across seven orders of magnitude. Additionally, the model is used to elucidate deviations between the simulated and experimental data, showing that the relationship between pulse width and output pulse energy is dominated by the variable-pulse-width oscillator performance, not the burst-mode amplifier.

High-energy laser pulses for extended duration megahertz-rate flow diagnostics

Optical diagnostics of highly dynamic supersonic and hypersonic flows requires laser sources with a combination of high pulse intensities and fast repetition rates. A burst-mode Nd:YAG laser system is presented for increasing the overall energy of 532 nm pulse trains by ∼100× and the number of high-energy pulses by 30× for extended duration megahertz-rate flow diagnostics. At a lower repetition rate of 100 kHz, unprecedented energies near 1 J/pulse are achieved at 532 nm over a 1.1 ms burst. The laser performance is characterized and demonstrated for megahertz-rate laser-induced breakdown spectroscopy in a Mach 2 turbulent jet.

Time-Resolved Measurements of Turbulent Mixing in Shock-Driven Variable-Density Flows

Recent developments of burst-mode lasers and imaging systems have opened new realms of simultaneous diagnostics for velocity and density fields at a rate of 1 kHz–1 MHz. These enable the exploration of previously unimaginable shock-driven turbulent flow fields that are of significant importance to problems in high-energy density physics. The current work presents novel measurements using simultaneous measurements of velocity and scalar fields at 60 kHz to investigate Richtmyer-Meshkov instability (RMI) in a spatio-temporal approach. The evolution of scalar fields and the vorticity dynamics responsible for the same are shown, including the interaction of shock with the interface. This temporal information is used to validate two vorticity-deposition models commonly used for initiation of large scale simulations, and have been previously validated only via simulations or integral measures of circulation. Additionally, these measurements also enable tracking the evolution and mode merging of individual flow structures that were previously not possible owing to inherently random variations in the interface at the smallest scales. A temporal evolution of symmetric vortex merging and the induced mixing prevalent in these problems is presented, with implications for the vortex paradigms in accelerated inhomogenous flows.

Development of a three-legged, high-speed, burst-mode laser system for simultaneous measurements of velocity and scalars in reacting flows

We report the development of a three-legged, high-speed, high-energy, burst-mode laser system for the simultaneous measurement of velocity and key combustion species in turbulent reacting flows. The laser system is designed to simultaneously amplify a four-pulse sequence [including a doublet pulse for particle image velocimetry (PIV) measurements] with variable pulse separations at a repetition rate up to 500 kHz and a burst duration of 1-10 ms. With the three-legged, burst-mode laser system, we demonstrate simultaneous measurements of velocity using PIV and planar laser-induced fluorescence imaging of hydroxyl and formaldehyde in a turbulent jet flame.

20 kHz CH2O and OH PLIF with stereo PIV

Planar laser-induced fluorescence (PLIF) of hydroxyl (OH) and formaldehyde (CH₂O) radicals was performed alongside stereo particle image velocimetry (PIV) at a 20 kHz repetition rate in a highly turbulent Bunsen flame. A dual-pulse burst-mode laser generated envelopes of 532 nm pulse pairs for PIV as well as a pair of 355 nm pulses, the first of which was used for CH₂O PLIF. A diode-pumped solid-state Nd:YAG/dye laser system produced the excitation beam for the OH PLIF. The combined diagnostics produced simultaneous, temporally resolved two-dimensional fields of OH and CH₂O and two-dimensional, three-component velocity fields, facilitating the observation of the interaction of fluid dynamics with flame fronts and preheat layers. The high-fidelity data acquired surpass the previous state of the art and demonstrate dual-pulse burst-mode laser technology with the ability to provide pulse pairs at both 532 and 355 nm with sufficient energy for scattering and fluorescence measurement at 20 kHz.

100 μJ pulse energy in burst-mode-operated hybrid fiber-bulk amplifier system with envelope shaping

A theoretical method was proposed to compensate the burst envelope distortion in a solid-state master-oscillator power-amplifier (MOPA) system operating in burst mode at an intra-burst repetition rate of 40 MHz. Arbitrary envelope shapes were achieved at inter-burst repetition rate of 100 kHz with 40 pulses in the burst, showing excellent agreement with the calculated ones. This is the first demonstration of arbitrary burst envelope without an adaptive feedback loop in a solid-state laser system. The maximum pulse energy of 100 μJ was achieved at inter-burst repetition rate of 40 kHz, with 10 pulses in the burst.

Simultaneous Burst Imaging of Dual Species Using Planar Laser-Induced Fluorescence at 50 kHz in Turbulent Premixed Flames

Spatially and temporally resolved measurements are of great importance in turbulent premixed flame studies, especially when investigating rapid processes such as when flame local extinction, re-ignition, or flashback occur in a reacting flow. Here, an experimental approach for simultaneously probing two different species at high frame rates (50 kHz) is presented by employing a multi-YAG laser system. The laser radiation at 355 nm generated by a multi-YAG laser system was split into two beam paths: one beam for exciting formaldehyde and the other for pumping an optical parametric oscillator (OPO). To be able to capture the resulting fluorescence at such a high frame rate without significant loss in spatial resolution, two framing cameras, containing a total of 16 intensified charge-coupled devices (CCDs), were employed. In principle, the proposed setup provides the possibility of probing formaldehyde and simultaneously accessing the distribution of one other relevant species at this high frame rate. In this demonstration, the laser wavelength was tuned to 283 nm and, in conjunction with the 355 nm beam path, simultaneously high speed two-dimensional (2D) visualization of OH-radicals and formaldehyde was achieved. A modified flat flame, McKenna-type burner was used to provide a turbulent premixed jet-flame supported by a surrounding pilot flame. Local flame extinction and re-ignition processes were recorded for fuel/air jet speeds of 120 m/s.

1-kHz two-dimensional coherent anti-Stokes Raman scattering (2D-CARS) for gas-phase thermometry

Two-dimensional gas-phase coherent anti-Stokes Raman scattering (2D-CARS) thermometry is demonstrated at 1 kHz in a heated jet. A hybrid femtosecond/picosecond CARS configuration is used in a two-beam phase-matching arrangement with a 100-femtosecond pump/Stokes pulse and a 107-picosecond probe pulse. The femtosecond pulse is generated using a mode-locked oscillator and regenerative amplifier that is synchronized to a separate picosecond oscillator and burst-mode amplifier. The CARS signal is spectrally dispersed in a custom imaging spectrometer and detected using a high-speed camera with image intensifier. 1-kHz, single-shot planar measurements at room temperature exhibit error of 2.6% and shot-to-shot variations of 2.6%. The spatial variation in measured temperature is 9.4%. 2D-CARS temperature measurements are demonstrated in a heated O₂ jet to capture the spatiotemporal evolution of the temperature field.

Regenerative amplification and bifurcations in a burst-mode Nd:YAG laser

An Nd:YAG-based burst-mode regenerative amplifier laser was developed that offers high extraction efficiency at high repetition rates with low seed energies. The regenerative amplification technique, combined with the burst-mode laser technology, shows promise as an efficient method for amplification of femtojoule-nanojoule pulses up to millijoule energies at repetition rates exceeding 100 kHz. Output energies at repetition rates near the inverse upper state lifetime are limited by bifurcations in the pulse energies of the burst. A model is developed and advantages and limitations are discussed.

Effects of repetitive pulsing on multi-kHz planar laser-induced incandescence imaging in laminar and turbulent flames

Planar laser-induced incandescence (LII) imaging is reported at repetition rates up to 100 kHz using a burst-mode laser system to enable studies of soot formation dynamics in highly turbulent flames. To quantify the accuracy and uncertainty of relative soot volume fraction measurements, the temporal evolution of the LII field in laminar and turbulent flames is examined at various laser operating conditions. Under high-speed repetitive probing, it is found that LII signals are sensitive to changes in soot physical characteristics when operating at high laser fluences within the soot vaporization regime. For these laser conditions, strong planar LII signals are observed at measurement rates up to 100 kHz but are primarily useful for qualitative tracking of soot structure dynamics. However, LII signals collected at lower fluences allow sequential planar measurements of the relative soot volume fraction with a sufficient signal-to-noise ratio at repetition rates of 10-50 kHz. Guidelines for identifying and avoiding the onset of repetitive probe effects in the LII signals are discussed, along with other potential sources of measurement error and uncertainty.

100-ps-pulse-duration, 100-J burst-mode laser for kHz-MHz flow diagnostics

A high-speed, master-oscillator power-amplifier burst-mode laser with ∼100  ps pulse duration is demonstrated with output energy up to 110 J per burst at 1064 nm and second-harmonic conversion efficiency up to 67% in a KD*P crystal. The output energy is distributed across 100 to 10,000 sequential laser pulses, with 10 kHz to 1 MHz repetition rate, respectively, over 10 ms burst duration. The performance of the 100 ps burst-mode laser is evaluated and been found to compare favorably with that of a similar design that employs a conventional ∼8  ns pulse duration. The nearly transform-limited spectral bandwidth of 0.15  cm(-1) at 532 nm is ideal for a wide range of linear and nonlinear spectroscopic techniques, and the 100 picosecond pulse duration is optimal for fiber-coupled spectroscopic measurements in harsh reacting-flow environments.