Acousto-holographic optical tweezers

Improving the multi-functionality of optical tweezers with FPGA integration

The development of optical tweezers aims to extend their operating function and pattern. However, excessive programming can lead to a decrease in the system's operating speed and introduce bugs or data transmission delays. In this study, we present a time-shared optical tweezers system that allows for parallel operation of multiple functions. To enable efficient data transmission, we employ a queue structure and a buffer. To assess the system's performance, we utilize a biological sample in conjunction with the optical tweezers system and scanning imaging technique. We quantify the trapping parameter while concurrently running power stabilization programs. As a result, the standard deviation of the measured stiffness is reduced by 60% in the x and y directions and 30% in the z direction, indicating a significant improvement in calibration precision. Throughout the program execution, the system maintains an operating rate of 110 kHz, and the data are continuously updated in real time on the host. The system's performance demonstrates its potential for quantification and morphological reconstruction of biological samples.

Microfluidic systems for particle capture and release: A review

Microfluidic technology has emerged as a promising tool in various applications, including biosensing, disease diagnosis, and environmental monitoring. One of the notable features of microfluidic devices is their ability to selectively capture and release specific cells, biomolecules, bacteria, and particles. Compared to traditional bulk analysis instruments, microfluidic capture-and-release platforms offer several advantages, such as contactless operation, label-free detection, high accuracy, good sensitivity, and minimal reagent requirements. However, despite significant efforts dedicated to developing innovative capture mechanisms in the past, the release and recovery efficiency of trapped particles have often been overlooked. Many previous studies have focused primarily on particle capture techniques and their efficiency, disregarding the crucial role of successful particle release for subsequent analysis. In reality, the ability to effectively release trapped particles is particularly essential to ensure ongoing, high-throughput analysis. To address this gap, this review aims to highlight the importance of both capture and release mechanisms in microfluidic systems and assess their effectiveness. The methods are classified into two categories: those based on physical principles and those using biochemical approaches. Furthermore, the review offers a comprehensive summary of recent applications of microfluidic platforms specifically designed for particle capture and release. It outlines the designs and performance of these devices, highlighting their advantages and limitations in various target applications and purposes. Finally, the review concludes with discussions on the current challenges faced in the field and presents potential future directions.

Artifact-free holographic light shaping through moving acousto-optic holograms

Holographic light modulation is the most efficient method to shape laser light into well-defined patterns and is therefore the means of choice for many intensity demanding applications. During the last two decades, spatial light modulators based on liquid crystals prevailed among several technologies and became the standard tool to shape light holographically. But in the near future, this status might be challenged by acousto-optic deflectors. These devices are well known for their excelling modulation rates and high optical power resilience. But only few scattered precedents exist that demonstrate their holographic capabilities, despite the many interesting properties that they provide. We implemented a holographic acousto-optic light modulation (HALM) system, that is based on displaying holograms on acousto-optic deflectors. We found that this system can eliminate the ubiquitous coherent artifacts that arise in holography through the inherent motion of acousto-optic holograms. That distinguishes our approach from any other holographic modulation technique and allows to reconstruct intensity patterns of the highest fidelity. A mathematical description of this effect is presented and experimentally confirmed by reconstructing images holographically with unprecedented quality. Our results suggest that HALM promotes acousto-optic deflectors from highly specialized devices to full-fledged spatial light modulators, that can compete in a multitude of applications with LC-SLMs. Especially applications that require large optical output powers, high modulation speeds or accurate gray-scale intensity patterns will profit from this technology. We foresee that HALM may play a major role in future laser projectors and displays, structured illumination microscopy, laser material processing and optical trapping.

Ring-shaped optical trap based on an acousto-optic tunable spatial filter

We report on a novel, to the best of our knowledge, optical scheme of an annular optical trap based on an acousto-optic tunable spatial filter. Design of the optical trap is proposed and validated. Experimental demonstration with polystyrene microspheres includes controllable arrangement of freely floating particles into a circular pattern, aggregation, and disaggregation of the particles. Dynamical adjustment of the trapping field potential diameter is achieved by programmable frequency-swept controlling of the acousto-optic filter.

Noncritical acousto-optic Bragg phase matching: analysis of orthorhombic and monoclinic crystal systems

Anisotropic acousto-optic diffraction in crystals is the fundamental phenomenon that is used to design acousto-optic tunable filters. Noncritical and quasicollinear phase-matching geometries of Bragg acousto-optic diffraction are compared for acoustic symmetry planes in four crystal systems (tetragonal, trigonal, orthorhombic, and monoclinic). The results for uniaxial crystals are reviewed and generalized for biaxial crystals. It is shown that cubic frequency dependence on the Bragg angle exists in two symmetry planes of orthorhombic crystals and conditionally exists in the symmetry plane of monoclinic crystals. It is also shown that there are two points in the symmetry plane of monoclinic crystals where noncritical phase matching takes place in quasicollinear diffraction geometry that can be used to design high-resolution tunable filters. Phase-matching configurations in α-iodic acid and potassium gadolinium tungstate crystals are analyzed.

Holographic Optical Tweezers and Boosting Upconversion Luminescent Resonance Energy Transfer Combined Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)/Cas12a Biosensors

Taking advantage of outstanding precision in target recognition and trans-cleavage ability, the recently discovered CRISPR/Cas12a system provides an alternative opportunity for designing fluorescence biosensors. To fully exploit the analytical potential, we introduce here some meaningful concepts. First, the collateral cleavage of CRISPR/Cas12a is efficiently activated in a functional DNA regulation manner and the bottleneck which largely applicable to nucleic acids detection is broken. After selection of a representative aptamer and DNAzyme as the transduction pathways, the sensing coverage is extended to a small organic compound (ATP) and a metal ion (Na⁺). The assay sensitivity is significantly improved by utilizing a bead-supported enrichment strategy wherein emerging holographic optical tweezers are used to enhance imaging stability and simultaneously achieve multiflux analysis. Last, a sandwich-structured energy-concentrating upconversion nanoparticle triggered boosting luminescent resonance energy transfer mode is comined to face with complicated biological samples by skillfully confining the emitters into a very limited inner shell. Following the above attempts, the developed CRISPR/Cas12a biosensors not only present an ultrasensitive assay behavior toward these model non-nucleic acid analytes but also can serve as a formidable toolbox for determining real samples including single cell lysates and human plasma, proving a good practical application capacity.

Positioning Accuracy in Holographic Optical Traps

Spatial light modulators (SLMs) have been widely used to achieve dynamic control of optical traps. Often, holographic optical tweezers have been presumed to provide nanometer or sub-nanometer positioning accuracy. It is known that some features concerning the digitalized structure of SLMs cause a loss in steering efficiency of the optical trap, but their effect on trap positioning accuracy has been scarcely analyzed. On the one hand, the SLM look-up-table, which we found to depend on laser power, produces positioning deviations when the trap is moved at the micron scale. On the other hand, phase quantization, which makes linear phase gratings become phase staircase profiles, leads to unexpected local errors in the steering angle. We have tracked optically trapped microspheres with sub-nanometer accuracy to study the effects on trap positioning, which can be as high as 2 nm in certain cases. We have also implemented a correction strategy that enabled the reduction of errors down to 0.3 nm.

Nano-particle transport and the prediction of a valid area to be trapped based on a plasmonic antenna array

Optical antennas are promising for optical trapping and particle manipulation, when converting light between localized energy and freely propagating radiation. In this paper, we proposed a numerical method for the transport of nanoparticles using the optical force field over a plasmonic Au antenna array. The plasmonic Au antenna array is designed to produce strong near-field hot spots when illuminated by a plane wave. The hot spots function as optical traps, separately addressable by their resonant wavelengths. By changing the traps sequentially, the nanoparticles can be handed off between adjacent traps. We also demonstrated a valid area in which the nanoparticles could be trapped and transferred stably by discussing the trapping potential that particles encountered. The simulated and calculated results showed that this method had promising applications in the field of biochemical diagnoses and high-accuracy optical manipulation.

Optical Tweezers Approaches for Probing Multiscale Protein Mechanics and Assembly

Multi-step assembly of individual protein building blocks is key to the formation of essential higher-order structures inside and outside of cells. Optical tweezers is a technique well suited to investigate the mechanics and dynamics of these structures at a variety of size scales. In this mini-review, we highlight experiments that have used optical tweezers to investigate protein assembly and mechanics, with a focus on the extracellular matrix protein collagen. These examples demonstrate how optical tweezers can be used to study mechanics across length scales, ranging from the single-molecule level to fibrils to protein networks. We discuss challenges in experimental design and interpretation, opportunities for integration with other experimental modalities, and applications of optical tweezers to current questions in protein mechanics and assembly.