Ultra-precise optical-frequency stabilization with heterogeneous III-V/Si lasers

Sub-kHz linewidth 1.6-µm single-frequency fiber laser based on a heavily erbium-doped silica fiber

We present a single-frequency erbium-doped fiber laser operated at 1608.8 nm using a homemade, heavily erbium-doped silica fiber as gain medium. The laser configuration is based on a ring cavity, which is combined with a fiber saturable absorber to achieve single-frequency operation. The measured laser linewidth is less than 447 Hz and the optical signal-to-noise ratio exceeds 70 dB. The laser exhibits an excellent stability, without any instance of mode-hopping during 1-hour observing. The fluctuations in both wavelength and power were measured to be 0.002 nm and less than 0.09 dB in a 45-minutes period. The laser produces over 14 mW of output power with a slope efficiency of 5.3%, which, to the best of our knowledge, is currently the highest power directly obtained from a single-frequency cavity based on an erbium-doped silica fiber above 1.6 µm.

Compact, portable, thermal-noise-limited optical cavity with low acceleration sensitivity

We develop and demonstrate a compact (less than 6 mL) portable Fabry-Pérot optical reference cavity. A laser locked to the cavity is thermal noise limited at 2 × 10^-14 fractional frequency stability. Broadband feedback control with an electro-optic modulator enables near thermal-noise-limited phase noise performance from 1 Hz to 10 kHz offset frequencies. The additional low vibration, temperature, and holding force sensitivity of our design makes it well suited for out-of-the-lab applications such as optically derived low noise microwave generation, compact and mobile optical atomic clocks, and environmental sensing through deployed fiber networks.

Chip-based laser with 1-hertz integrated linewidth

Lasers with hertz linewidths at time scales of seconds are critical for metrology, timekeeping, and manipulation of quantum systems. Such frequency stability relies on bulk-optic lasers and reference cavities, where increased size is leveraged to reduce noise but with the trade-off of cost, hand assembly, and limited applications. Alternatively, planar waveguide-based lasers enjoy complementary metal-oxide semiconductor scalability yet are fundamentally limited from achieving hertz linewidths by stochastic noise and thermal sensitivity. In this work, we demonstrate a laser system with a 1-s linewidth of 1.1 Hz and fractional frequency instability below 10^-14 to 1 s. This low-noise performance leverages integrated lasers together with an 8-ml vacuum-gap cavity using microfabricated mirrors. All critical components are lithographically defined on planar substrates, holding potential for high-volume manufacturing. Consequently, this work provides an important advance toward compact lasers with hertz linewidths for portable optical clocks, radio frequency photonic oscillators, and related communication and navigation systems.

Precise laser linewidth measurement by feature extraction with short-delay self-homodyne

We propose a precision measurement method of laser linewidth based on short-delay self-homodyne, using the second peak-valley difference (SPVD) feature of the coherent power spectrum to fit laser linewidth. The SPVD model of the self-homodyne coherent envelope spectrum was established. One-to-one correspondence among the values of SPVD, the delay length, and the laser linewidth was determined theoretically and through simulations, while the reliability and stability of the method was verified experimentally. By comparing the detected results, it is found that the fitted laser linewidth obtained by the self-homodyne system is closer to its true value than that obtained by the self-heterodyne system. Hence, the simpler structure of the short-delay self-homodyne coherent envelope laser linewidth measurement method proposed is expected to substitute the previous laser linewidth measurement method, including complex short-delay self-heterodyne coherent envelope laser linewidth measurement method and traditional self-homodyne/heterodyne laser linewidth measurement method, to achieve more precise laser linewidth value.