Experimental demonstration of lossy mode and surface plasmon resonance generation with Kretschmann configuration

Lossy Mode Resonance Sensors Based on Anisotropic Few-Layer Black Phosphorus

Lossy mode resonance (LMR) sensors offer a promising avenue to surpass the constraints of conventional surface plasmon resonance (SPR) sensors by delivering enhanced label-free detection capabilities. A notable edge of LMR over SPR is its excitation potential by both transverse electric (TE) and transverse magnetic (TM) polarized light. Yet this merit remains underexplored due to challenges to achieving high sensing performance under both TM and TE polarization within a singular LMR model. This study introduces a theoretical model for an LMR prism refractive index sensor based on a MgF2-few layer black phosphorus-MgF2 configuration, which can achieve angular sensitivity nearing 90° refractive index unit-1 (RIU-1) for both polarizations. Leveraging the distinct anisotropic nature of black phosphorus, the figure of merit (FOM) values along its two principal crystal axes (zigzag and armchair) show great difference, achieving an impressive FOM of 1.178 × 106 RIU-1 along the zigzag direction under TE polarized light and 1.231 × 104 RIU-1 along the armchair direction under TM polarized light. We also provide an analysis of the electric field distribution for each configuration at its respective resonant conditions. The proposed structure paves the way for innovative applications of anisotropic-material-based LMR sensors in various applications.

An Interplay between Lossy Mode Resonance and Surface Plasmon Resonance and Their Sensing Applications

Conducting metal oxide (CMO) supports lossy mode resonance (LMR) at the CMO-dielectric interface, whereas surface plasmon resonance (SPR) occurs at the typical plasmonic metal-dielectric interface. The present study investigates these resonances in the bi-layer (ITO + Ag) and tri-layer (ITO + Ag + ITO) geometries in the Kretschmann configuration of excitation. It has been found that depending upon the layer thicknesses one resonance dominates the other. In particular, in the tri-layer configuration of ITO + Ag + ITO, the effect of the thickness variation of the sandwiched Ag layer is explored and a resonance, insensitive to the change in the sensing medium refractive index (RI), has been reported. Further, the two kinds of RI sensing probes and the supported resonances have been characterized and compared in terms of sensitivity, detection accuracy and figure of merit. These studies will not only be helpful in gaining a better understanding of underlying physics but may also lead to the realization of biochemical sensing devices with a wider spectral range.

Theoretical modeling and investigations of lossy mode resonance prism sensor based on TiO2 film

The optical sensor based on lossy mode resonance can overcome the limitations of traditional surface plasmon resonance sensors and work under TE and TM polarized light. In this paper, an LMR sensor theoretical model with the configuration of prism/matching layer/lossy layer/sensing layer is proposed, which is based on the principle of attenuated total reflection. By using TiO₂ film as the lossy layer and LiF film as the matching layer, the resonance signal under angle interrogation is effectively improved. One of the advantages of the proposed sensor is that the detection range and detection accuracy are dynamically adjustable, which provides additional degrees of freedom in the design and use of the device. The structural parameters (film thickness, layer refractive index) affecting the resonance signal have been investigated based on the electric field distribution at resonance and the coupled mode theory. The LMR signal under TE and TM polarization can be switched by changing the thickness ratio of the matching layer and the lossy layer. All possible combinations of film thicknesses are given as a reference for the design of the LMR prism sensor based on TiO₂ film. Under proper thickness combination, the proposed sensor is capable of detecting the medium with refractive index ranging from 1.32 ∼ 1.47, with a sensitivity range of 34 ∼ 148 °/RIU under angle interrogation and a maximum value of 192 RIU^-1 for FOM under TM polarization. We hope these investigations can prove the advantages of LMR prism sensors and provide guidance for the experimental implementation of LMR prism sensors in the future.

Simultaneous Generation of Surface Plasmon and Lossy Mode Resonances in the Same Planar Platform

A planar waveguide consisting of a coverslip for a microscope glass slide was deposited in one of its two faces with two materials: silver and indium tin oxide (ITO). The incidence of light by the edge of the coverslip permitted the generation of both surface plasmon and lossy mode resonances (SPRs and LMRs) in the same transmission spectrum with a single optical source and detector. This proves the ability of this optical platform to be used as a benchmark for comparing different optical phenomena generated by both metal and dielectric materials, which can be used to progress in the assessment of different sensing technologies. Here the SPR and the LMR were compared in terms of sensitivity to refractive index and figure of merit (FoM), at the same time it was demonstrated that both resonances can operate independently when silver and ITO coated regions are surrounded by different refractive index liquids. The results were supported with numerical results that confirm the experimental ones.

Material platform for realization of a "fiber-like" lossy mode resonance response in a simple Kretschmann-Raether geometry

The lossy mode resonance (LMR) phenomenon is almost exclusively limited to fiber optics, since the thin film configuration yields a relatively shallow resonance dip compared to its fiber counterpart. In this Letter, we bridge this frustrating intensity gap between these basic configurations by choosing vacuum-deposited metallic indium-rich indium tin oxide as the coating material. LMR attenuation as high as -14.3dB for transverse electric and -6.4dB for transverse magnetic polarization is achieved experimentally via a commonly used Kretschmann-Raether geometry and that too for a film thickness of ≈70nm. Such a high degree of LMR response is attributed to the metallic indium generated interbands, leading to a high extinction coefficient in the visible range. A modified transfer matrix method, which takes into account the surface roughness of the films through application of the anisotropic Bruggeman effective medium approximation, is developed to realize the experimental LMR spectra numerically.

Interdigital concept in photonic sensors based on an array of lossy mode resonances

Multi-parameter detection is key in the domain of sensors. Here it is demonstrated that an indium tin oxide (ITO) nanocoating can be used to generate multiple lossy mode resonances (LMRs) in the optical spectrum. To achieve this, a nanocoating with a gradient in thickness is generated on the surface of a planar waveguide, permitting broadening of the LMR because the position of an LMR in the optical spectrum is directly related to the nanocoating thickness. The nanocoating with a gradient in thickness contributes multiple LMRs, each one centred at a different wavelength. With a further etching or deposition using a mask, a pattern of deposited and non-deposited regions can be created, resulting in isolation of the LMRs by preventing LMR overlap. This enables tracking of each central wavelength separately, which can be tuned through control of the gradient or nanocoating pattern. The array of LMR-based sensors is a photonics analogue to the interdigital concept in electronics, enabling multiple resonances to be used for multiparameter sensing.

Lossy-mode-resonance sensor based on perovskite nanomaterial with high sensitivity

Lossy-mode-resonance (LMR) is a surface plasmon resonance (SPR)-analogue optical phenomenon, which is sensitive to the surrounding environment variations and can be considered as an important detection signal in biochemical sensors. Compared with the SPR sensor which can only operate under transverse magnetic (TM)-polarized light, the LMR sensor shows a more excellent application prospect and can operate in both TM- and transverse electric (TE)-polarized light. In this work, a CH₃NH₃PbBr₃-based LMR configuration is proposed to apply in optical sensors. When the incident light is in TM mode, the preferred way to improve the performance of the LMR sensor is optimizing the thickness of the matching layer, and the highest sensitivity of 11382 refractive index unit (RIU^-1) is achieved, which is more than 200 times larger than that of the conventional Au-based SPR sensor; when the incident light is in TE mode, it is more advantageous to improve the properties of LMR sensor by optimizing the thickness of CH₃NH₃PbBr₃ layer, and a high sensitivity of 21697 RIU^-1 is obtained. With such high sensitivity, we believe that the CH₃NH₃PbBr₃-based LMR sensor will find potential applications in biology, medicine, chemistry and other fields.

Dually nanocoated planar waveguides towards multi-parameter sensing

The incidence of light on the edge of a glass coverslip for a microscope slide, deposited with a thin film on both faces, permits exciting two resonances in each polarisation state of the input light, TE and TM. This dually nanocoated waveguide can be used for detecting simultaneously two different parameters on the basis of a further deposition of suitable materials on each face. As an example, the possibility of detecting temperature and humidity by using polydimethylsiloxane and agarose coatings, respectively, was demonstrated, which opens the path for the development of other dual-parameter sensors, and for even more parameters in cases in which each face of the coverslip is patterned. Moreover, the device was optimised in order to position two resonances in the near infrared (NIR) and two resonances in the visible region, with sensitivities of 0.34 nm/°C and 0.23 nm/%RH in the visible region and 1.16 nm/°C and 0.34 nm/%RH in the NIR, respectively, demonstrating the possibility of using the device in both spectral ranges and opening the path for the development of sensors based on multiple resonances, each one related to a different parameter to be detected.

Fiber Optic Gas Sensors Based on Lossy Mode Resonances and Sensing Materials Used Therefor: A Comprehensive Review

Pollution in cities induces harmful effects on human health, which continuously increases the global demand of gas sensors for air quality control and monitoring. In the same manner, the industrial sector requests new gas sensors for their productive processes. Moreover, the association between exhaled gases and a wide range of diseases or health conditions opens the door for new diagnostic applications. The large number of applications for gas sensors has permitted the development of multiple sensing technologies. Among them, optical fiber gas sensors enable their utilization in remote locations, confined spaces or hostile environments as well as corrosive or explosive atmospheres. Particularly, Lossy Mode Resonance (LMR)-based optical fiber sensors employ the traditional metal oxides used for gas sensing purposes for the generation of the resonances. Some research has been conducted on the development of LMR-based optical fiber gas sensors; however, they have not been fully exploited yet and offer optimal possibilities for improvement. This review gives the reader a complete overview of the works focused on the utilization of LMR-based optical fiber sensors for gas sensing applications, summarizing the materials used for the development of these sensors as well as the fabrication procedures and the performance of these devices.

A Comprehensive Review: Materials for the Fabrication of Optical Fiber Refractometers Based on Lossy Mode Resonance

Lossy mode resonance based sensors have been extensively studied in recent years. The versatility of the lossy mode resonance phenomenon has led to the development of sensors based on different configurations that make use of a wide range of materials. The coating material is one of the key elements in the performance of a refractometer. This review paper intends to provide a global view of the wide range of coating materials available for the development of lossy mode resonance based refractometers.

Lossy mode resonance sensors based on lateral light incidence in nanocoated planar waveguides

The deposition of an indium oxide (In₂O₃) thin film on conventional planar waveguides (a coverslip and a glass slide) allows generating lossy mode resonances (LMR) by lateral incidence of light on the waveguide and by registering the optical spectrum in a spectrometer. This novel sensing system becomes an alternative to optical fibre, the substrate where LMR-based sensors have been developed so far, since it is easier to handle and more robust. An additional advantage is that cost effective waveguides, such as slides or coverslips, can be used in a platform that resembles surface plasmon resonance-based sensors in the Kretschmann configuration but without the need for a coupling prism and with the advantage of being able to generate TE and TM LMR resonances with metallic oxide or polymer thin films. The results are corroborated with simulations, which provide in-depth understanding of the phenomena involved in the sensing system. As a proof-of-concept for the optical platform, two refractometers were developed, one with low sensitivity and for a wide range of refractive indices, and the other with higher sensitivity but for a narrower refractive index range. The sensors presented here open up the path for the development of LMR-based chemical sensors, environmental sensors, biosensors, or even the generation of other optical phenomena with the deposition of multilayer structures, gratings or nanostructures, which is much easier in a planar waveguide than in an optical fibre.