Rotationally tunable varifocal 3D metalens

Terahertz quasi-optics imaging systems with easy zoom based on beam-shaping devices and a freeform lens

Terahertz (THz) waves show outstanding application value in the nondestructive detection of hidden targets that are impenetrable to visible light. However, the uncertain location of hidden targets puts a higher demand on the zoom function of the THz quasi-optical systems, especially when the object is immovable. This paper proposes a continuous zoom system working in the THz band consisting of a negative axicon disk, a segmented axicon, and a freeform lens. The negative axicon disk and segmented axicon shape THz waves into annular beams with adjustable diameters, which are respectively focused at different positions by the zone-designed freeform lens. Both simulation and experimental results indicate that the zoom range of the system can reach 82 mm while maintaining an imaging resolution of 6 mm. Notably, continuous zooming is achieved by merely rotating the negative axicon disk, instead of the lens moving. Moreover, all devices in the system can be fabricated by 3D printing or machining. This approach offers the advantages of simple adjustment and low cost, providing, to our knowledge, a novel perspective for the design and application of THz quasi-optical imaging systems.

Multifocal multilevel diffractive lens by wavelength multiplexing

Flat lenses with focal length tunability can enable the development of highly integrated imaging systems. This work explores machine learning to inverse design a multifocal multilevel diffractive lens (MMDL) by wavelength multiplexing. The MMDL output is multiplexed in three color channels, red (650 nm), green (550 nm), and blue (450 nm), to achieve varied focal lengths of 4 mm, 20 mm, and 40 mm at these three color channels, respectively. The focal lengths of the MMDL scale significantly with the wavelength in contrast to conventional diffractive lenses. The MMDL consists of concentric rings with equal widths and varied heights. The machine learning method is utilized to optimize the height of each concentric ring to obtain the desired phase distribution so as to achieve varied focal lengths multiplexed by wavelengths. The designed MMDL is fabricated through a direct-write laser lithography system with gray-scale exposure. The demonstrated singlet lens is miniature and polarization insensitive, and thus can potentially be applied in integrated optical imaging systems to achieve zooming functions.

Dynamic adjustable metalens based on a stretchable substrate with a double-layer metal microstructure

Based on the impedance-matching theory, a double-layer metal structure dynamical focusing cylindrical metalens with a stretchable substrate was designed at the operation frequency of 0.1 THz. The diameter, initial focal length, and NA of the metalens were 80 mm, 40 mm, and 0.7, respectively. The transmission phase of the unit cell structures could cover 0-2π by changing the size of the metal bars, and then the different unit cells were spatially arranged as the designed phase profile for the metalens. When the stretching range of the substrate was about 100%-140%, the focal length changed from 39.3 mm to 85.5 mm, the dynamic focusing range was about 117.6% of the minimum focal length, and the focusing efficiency decreases from 49.2% to 27.9%. Then, by rearranging the unit cell structures, a dynamically adjustable bifocal metalens was numerically realized. Using the same stretching ratio, compared to a single focus metalens, the bifocal metalens can provide a larger focal length control range.

Transmission optimized LWIR metalens

Thermal imaging at the infrared wavelength regime has long been applied to different areas such as agriculture and defense industries. Metasurfaces, 2D engineered ultra-thin structures, have attracted much attention due to their compact size, superior performance, and different functionalities at optical frequencies. This work details the design and fabrication of high transmission metalenses operating at the long-wave infrared (LWIR) spectrum. We minimize the reflection losses through anti-reflection coating (ARC) while maintaining the full wavefront control at the central wavelength 9.07 µm. Our unit cell structure provides an average transmission of 97.5%. We experimentally verify our results and show that the fabricated metalenses perform diffraction-limited imaging at the design wavelength.

Tunable two-element diffractive lenses with optimal bandwidth utilization

Previous work has shown that a set of two diffractive optical elements arranged in series can form a diffractive lens with variable optical power that can be tuned by relative rotation of its two sub-elements about their common central axis. However, previous designs of these diffractive optical elements did not take advantage of the full spatial resolution required for the fabrication process because the corresponding sub-elements consisted of both, regions with very high phase gradients (requiring full resolution) and other extended regions with nearly vanishing phase gradients, where the available resolution is "wasted". Here, an advanced design is proposed that exploits the full spatial bandwidth of the production system. This is done by increasing the polar (angular) phase gradient of each sub-element such that it approaches the usually much larger radial phase gradient. A pair of these new sub-elements then composes a diffractive lens that has the same tuning range of its optical power than a standard tunable diffractive lens, but advantageously achieved within a much smaller relative rotation range. This has advantages in systems where high speed tuning of optical power is required, and in systems where the rotation angle is limited.

Coherently switching the focusing characteristics of all-dielectric metalenses

Flat, gradient index, metasurface optics - in particular all-dielectric metalenses - have emerged and evolved over recent years as compact, lightweight alternative to their conventional bulk glass/crystal counterparts. Here we show that the focal properties of all-dielectric metalenses can be switched via coherent control, which is to say by changing the local electromagnetic field in the metalens plane rather than any physical or geometric property of the nanostructure or surrounding medium. The selective excitation of predominantly electric or magnetic resonant modes in the constituent cells of the metalens provides for switching, by design, of its phase profile enabling binary switching of focal length for a given lens type and, uniquely, switching between different (spherical and axicon) lens types.