100 W high-repetition-rate near-infrared optical parametric chirped pulse amplifier

Complete characterization of a Yb-based OPA at a high repetition rate using frequency resolved optical switching

We demonstrate experimentally that frequency resolved optical switching (FROSt) can be used to characterize ultra-broadband pulses at high repetition rates up to 500 kHz. Specifically, we present the complete temporal characterization of an optical parametric amplifier (OPA), from the supercontinuum (SC) to the second stage of amplification. Simultaneous characterization of co-propagating signal and idler pulses enables retrieval of their group delay, as well as their temporal phase and intensity. Our study focuses on an extensive frequency range spanning the infrared region (1.2 to 2.4 µm) and confirms the strength and convenience of FROSt as a single tool for characterizing a wide range of pulses at high repetition rates.

High-power two-color plasma-based THz generation driven by a Tm-doped fiber laser

We report on the efficient generation of broadband THz radiation based on a two-color gas-plasma scheme. Broadband THz pulses covering the whole THz spectral region, from 0.1-35 THz, are generated. This is enabled by a high-power, ultra-fast, thulium-doped, fiber chirped pulse amplification (Tm:FCPA) system and a subsequent nonlinear pulse compression stage that uses a gas-filled capillary. The driving source delivers 40 fs pulses at a central wavelength of 1.9 μm with 1.2 mJ pulse energy and 101 kHz repetition rate. Owing to the long driving wavelength and the use of a gas-jet in the THz generation focus, the highest reported conversion efficiency for high-power THz sources (>20 mW) of 0.32% has been achieved. The high efficiency and average power of 380 mW of the broadband THz radiation make this an ideal source for nonlinear, tabletop THz science.

Nonlinear pulse compression to sub-two-cycle, 1.3 mJ pulses at 1.9 μm wavelength with 132 W average power

We report the nonlinear pulse compression of a high-power, thulium-doped fiber laser system using a gas-filled hollow-core fiber. The sub-two cycle source delivers 1.3 mJ pulse energy with 80 GW peak power at a central wavelength of 1.87 μm and an average power of 132 W. This is, so far, to the best of our knowledge, the highest average power of a few-cycle laser source reported in the short-wave infrared region. Given its unique combination of high pulse energy and high average power, this laser source is an excellent driver for nonlinear frequency conversion, toward terahertz, mid-infrared, and soft X-ray spectral regions.

FLASH free electron laser pump-probe laser concept based on spectral broadening of high-power ytterbium picosecond systems in multi-pass cells

Within the FLASH2020+ upgrade, the pump-probe laser capabilities of the extreme ultraviolet and soft x-ray free-electron laser (XFEL) FLASH in Hamburg will be extended. In particular, providing wavelength tunability, shorter pulse durations, and reduced arrival time jitter will increase the scientific opportunities and the time resolution for the XFEL-optical laser pump-probe experiments. We present here a novel concept for the pump-probe laser at FLASH that is based on the post-compression of picosecond pulses emitted from high-power Ytterbium:YAG slab amplifiers. Flexible reduction of the pulse duration is facilitated by spectral broadening in pressure-tunable multi-pass cells. As an application, we show the pumping of a commercial optical parametric amplifier with 150 fs post-compressed pulses. By means of an additional difference frequency generation stage, tunable spectral coverage from 1.3 to 16 μm is reached with multi-μJ, sub-150 fs pulses. Finally, a modular reconfiguration approach to the optical setups close to the free-electron laser instruments is implemented. This enables fast installation of the nonlinear frequency converters at the end stations for user operation and flexibility between different instruments in the two experimental halls.

Demonstration of 85% pump depletion and 10-6 noise content in quasi-parametric chirped-pulse amplification

Full pump depletion corresponds to the upper limit of the generated signal photons relative to the pump pulse; this allows the highest peak power to be produced in a unit area of ultraintense laser amplifiers. In practical systems based on optical parametric chirped-pulse amplification, however, the typical pump depletion is only ~35%. Here, we report quasi-parametric chirped-pulse amplification (QPCPA) with a specially designed 8-cm-thick Sm:YCOB crystal that highly dissipates the idler and hence improves pump depletion. We demonstrate 56% QPCPA energy efficiency for an 810-nm signal converted from a 532-nm pump, or equivalently 85% pump depletion. As another advantage, such a record high depletion greatly suppresses the parametric superfluorescence noise in QPCPA to only ~1.5 × 10^-6 relative to the amplified signal energy. These results pave the way to beyond the ten-petawatt peak power of the currently most intense lasers.

Nonlinear pulse compression to 51-W average power GW-class 35-fs pulses at 2-µm wavelength in a gas-filled multi-pass cell

We report on the generation of GW-class peak power, 35-fs pulses at 2-µm wavelength with an average power of 51 W at 300-kHz repetition rate. A compact, krypton-filled Herriott-type cavity employing metallic mirrors is used for spectral broadening. This multi-pass compression stage enables the efficient post compression of the pulses emitted by an ultrafast coherently combined thulium-doped fiber laser system. The presented results demonstrate an excellent preservation of the input beam quality in combination with a power transmission as high as 80%. These results show that multi-pass cell based post-compression is an attractive alternative to nonlinear spectral broadening in fibers, which is commonly employed for thulium-doped and other mid-infrared ultrafast laser systems. Particularly, the average power scalability and the potential to achieve few-cycle pulse durations make this scheme highly attractive.

Ultrafast Tm-doped fiber laser system delivering 1.65-mJ, sub-100-fs pulses at a 100-kHz repetition rate

High-energy, ultrafast, short-wavelength infrared laser sources with high average power are important tools for industrial and scientific applications. Through the coherent combination of four ultrafast thulium-doped rod-type fiber amplifiers, we demonstrate a Tm-doped chirped pulse amplification system with a compressed pulse energy of 1.65 mJ and 167 W of average output power at a repetition rate of 101 kHz. The system delivers 85 fs pulses with a peak power of 15 GW. Additionally, the system presents a high long- and short-term stability. To the best of our knowledge, this is the highest average output power short wavelength IR, mJ-class source to date. This result shows the potential of coherent beam combining techniques in the short wavelength infrared spectral region for the power scalability of these systems.

Simple carrier-envelope phase control and stabilization scheme for difference frequency generation-based systems

We report about a setup for carrier-envelope phase (CEP) control and stabilization in passive systems based on difference frequency generation (DFG). The principle of this approach relies on the amplitude to phase modulation transfer in the white-light generation process. A small modulation of the pump laser intensity is used to obtain a DFG output modulated in CEP. This technique is demonstrated in a CEP-stable system pumped by an Yb-doped fiber amplifier. It is first characterized by measuring CEP modulations produced by applying arbitrary waveforms. The CEP actuator is then used for slow drifts correction in a feedback loop. The results show the capability of this simple approach for OPA/OPCPA CEP-stabilized setups.

Femtosecond Optical Laser System with Spatiotemporal Stabilization for Pump-Probe Experiments at SACLA

We constructed a synchronized femtosecond optical laser system with spatiotemporal stabilization for pump-probe experiments at SPring-8 Angstrom Compact Free Electron Laser (SACLA). Stabilization of output power and pointing has been achieved with a small fluctuation level of a few percent by controlling conditions of temperature and air-flow in the optical paths. A feedback system using a balanced optical-microwave phase detector (BOMPD) has been successfully realized to reduce jitter down to 50 fs. We demonstrated the temporal stability with a time-resolved X-ray diffraction measurement and observed the coherent phonon oscillation of the photo-excited Bi without the post-processing using the timing monitor.

A high-power, high-repetition-rate THz source for pump-probe experiments at Linac Coherent Light Source II

Experiments using a THz pump and an X-ray probe at an X-ray free-electron laser (XFEL) facility like the Linac Coherent Light Source II (LCLS II) require frequency-tunable (3 to 20 THz), narrow bandwidth (∼10%), carrier-envelope-phase-stable THz pulses that produce high fields (>1 MV cm^-1) at the repetition rate of the X-rays and are well synchronized with them. In this paper, a two-bunch scheme to generate THz radiation at LCLS II is studied: the first bunch produces THz radiation in an electromagnet wiggler immediately following the LCLS II undulator that produces X-rays from the second bunch. The initial time delay between the two bunches is optimized to compensate for the path difference in THz transport. The two-bunch beam dynamics, the THz wiggler and radiation are described, as well as the transport system bringing the THz pulses from the wiggler to the experimental hall.

Temperature-insensitive broadband optical parametric chirped pulse amplification based on a tilted noncollinear QPM design

Ultrafast pulsed laser of high intensity and high repetition rate is the combined requisite for advancing strong-field physics experiments and calls for the development of thermal-stable ultrafast laser systems. Noncollinear phasing matching (PM) is an effective solution of optimizing the properties of optical parametric chirped pulse amplification (OPCPA) to achieve broadband amplification or to be temperature-insensitive. But as a cost, distinct noncollinear geometries have to be respectively satisfied. In this paper, a noncollinear quasi-phase-matching (QPM) scheme of both temperature- and wavelength-insensitive is presented. With the assistance of the design freedom of grating wave vector, the independent noncollinear-angle requirements can be simultaneously realized in a tilted QPM crystal, and the temperature-insensitive broadband amplification is achieved. Full-dimensional spatial-temporal simulations for a typical 1064 nm pumped mid-IR OPCPA at 3.4 µm are presented in detail. Compared with a mono-functional temperature-insensitive or broadband QPM scheme, the presented QPM configuration shows a common characteristic that simultaneously optimizes the thermal stability and the gain spectrum. Broadband parametric amplification of a ∼40 fs (FWHM) pulsed laser is achieved with no signs of gain-narrowing. Both of the beam profiles and the amplified spectra stay constant while the temperature is elevated by ∼100°C. Finally, influence of the QPM grating errors on the gain spectrum is discussed.