Silicon photonic arrayed waveguide grating with 64 channels for the 2 µm spectral range

Efficient and high-speed coupling modulation of silicon racetrack ring resonators at 2 µm waveband

Significantly increased interests have been witnessed for the 2 µm waveband which is considered to be a promising alternative window for fiber and free-space optical communications. However, the less mature device technology at this wavelength range is one of the primary obstacles toward practical applications. In this work, we demonstrate an efficient and high-speed silicon modulator based on carrier depletion in a coupling tunable resonator. A benchmark high modulation efficiency of 0.75 V·cm is achieved. The 3-dB electro-optic bandwidth is measured to be 26 GHz allowing for up to 34 Gbit/s on-off keying modulation with a low energy consumption of ∼0.24 pJ/bit. It provides a solution for the silicon modulator with high-speed and low power consumption in the 2-µm waveband.

On-chip Y-junction with adaptive power splitting toward ultrabroad bandwidth

Growing research interests have been directed to the emerging optical communication band at 2-µm wavelengths. The silicon photonic components are highly desired to operate over a broad bandwidth covering both C-band and the emerging 2-µm wave band. However, the dispersions of the silicon waveguides eventually limit the optical bandwidth of the silicon photonic devices. Here, we introduce a topology-optimized Y-junction with a shallow-etched trench and its utility to reverse the detrimental dispersion effect. The shallow trench enables the Y-junction to have an adaptive splitting capability over a broad spectral range. The 0.2-dB bandwidth of the power splitter exceeds 800 nm from 1400 nm to 2200 nm. The device has a compact footprint of 3 µm × 1.64 µm. The device is characterized at the C-band and 2-µm band with a measured excess loss below 0.4 dB for a proof-of-concept demonstration.

Silicon MMI-based power splitter for multi-band operation at the 1.55 and 2 µm wave bands

Multimode interference (MMI)-based power splitters are fundamental building blocks for integrated photonic devices consisting of an interferometer structure. In order to forestall the 'capacity crunch' in optical communications, integrated devices capable of operating in multiple spectral bands (e.g., the conventional telecom window and the emerging 2 µm wave band) have been proposed and are attracting increasing interest. Here, we demonstrate for the first time, to the best of our knowledge, the realization of a dual-band MMI-based 3 dB power splitter operating at the 1.55 and 2 µm wave bands. The fabricated power splitter exhibits low excess losses of 0.21 dB and 0.32 dB with 1 dB bandwidths for 1500-1600 nm and 1979-2050 nm, respectively.

Silicon photonic flat-top WDM (de)multiplexer based on cascaded Mach-Zehnder interferometers for the 2 µm wavelength band

The 2 µm wavelength band has proven to be a promising candidate for the next communication window. Wavelength-division multiplexing (WDM) transmission at 2 µm can greatly increase the capacity of optical communication systems. Here, we experimentally demonstrate a high-performance silicon photonic flat-top 8-channel WDM (de)multiplexer based on cascaded Mach-Zehnder interferometers for the 2 µm wavelength band. A three-stage-coupler scheme is utilized to provide passbands and reduce channel crosstalk, and 11 thermo-optic phase shifters have allowed active compensation of waveguide phase errors. The fabricated device shows low insertion loss (< 0.9 dB), channel crosstalk (< 20.6 dB) and 1-dB bandwidth of 2.3 nm for operating wavelength ranging from 1955nm to 1985nm. The demonstrated (de)multiplexer could potentially be used for WDM optical data communication in the 2 µm spectral band.

High-performance silicon PIN diode switches in the 2-µm wave band

The 2-µm wave band has attracted significant research interest due to its potential applications for next-generation high-capacity optical communication and sensing. As the key component, fast optical switches are essential for an advanced and reconfigurable optical network. Motivated by this prospect, we propose and demonstrate two typical silicon PIN diode switches at 2 µm. One is based on a coupled microring resonator (CMRR), and the other is based on a Mach-Zehnder interferometer (MZI) with a push-pull-like configuration. The measured insertion loss of the CMRR switch is <2.5 dB, and the cross talk is <-10.8 dB. The insertion loss of the MZI switch is <2 dB, and the cross talk is <-15.6 dB. The switch times of these two structures are both lower than 12.5 ns.