Production of 3-Hydroxypropionic Acid via the Propionyl-CoA Pathway Using Recombinant Escherichia coli Strains

Microbiome-based precision nutrition: Prebiotics, probiotics and postbiotics

Microorganisms have been used in nutrition and medicine for thousands of years worldwide, long before humanity knew of their existence. It is now known that the gut microbiota plays a key role in regulating inflammatory, metabolic, immune and neurobiological processes. This text discusses the importance of microbiota-based precision nutrition in gut permeability, as well as the main advances and current limitations of traditional probiotics, new-generation probiotics, psychobiotic probiotics with an effect on emotional health, probiotic foods, prebiotics, and postbiotics such as short-chain fatty acids, neurotransmitters and vitamins. The aim is to provide a theoretical context built on current scientific evidence for the practical application of microbiota-based precision nutrition in specific health fields and in improving health, quality of life and physiological performance.

Recent Advances, Challenges and Metabolic Engineering Strategies in the Biosynthesis of 3-Hydroxypropionic Acid

As an attractive and valuable platform chemical, 3-hydroxypropionic acid (3-HP) can be used to produce a variety of industrially important commodity chemicals and biodegradable polymers. Moreover, the biosynthesis of 3-HP has drawn much attention in recent years due to its sustainability and environmental friendliness. Here, we focus on recent advances, challenges and metabolic engineering strategies in the biosynthesis of 3-HP. While glucose and glycerol are major carbon sources for its production of 3-HP via microbial fermentation, other carbon sources have also been explored. To increase yield and titer, synthetic biology and metabolic engineering strategies have been explored, including modifying pathway enzymes, eliminating flux blockages due to byproduct synthesis, eliminating toxic byproducts, and optimizing via genome-scale models. This review also provides insights on future directions for 3-HP biosynthesis. This article is protected by copyright. All rights reserved.

Coupled synthetic pathways improve the production of 3-hydroxypropionic acid in recombinant Escherichia coli strains

To improve the production of 3-HP with glucose as a substrate, the malonyl-CoA and propionyl-CoA pathways were coupled to regulate NADP+/NADPH regeneration in the recombinant E. coli. The strain Ec-AM that overexpressed the key enzymes of the malonyl-CoA pathway, acetyl CoA carboxylase (ACC) from Ustilago maydis and malonyl CoA reductase (MCR) from Chloroflexus aurantiacus, produced 0.26 g/L of 3-HP in 25-h shake flask cultivation. The strain Ec-P overexpressing the key enzyme of the propionyl-CoA pathway, propionyl-CoA dehydrogenase (PACD) from Candida rugosa, produced 0.11 g/L of 3-HP. However, 3-HP titer of the strain Ec-PAM overexpressing PACD along with ACC and MCR, via two pathways cooperation, was 1.29 g/L. The addition of biotin and bicarbonate improved the 3-HP production of the strain Ec-PAM. 3-HP titer of strain Ec-ΔY-ΔP-PAM with double deletion of ygfH (encoding propionyl-CoA: succinate-CoA transferase) and prpC (encoding methylcitrate synthase) genes reached 1.94 g/L, which was 1.5-fold higher than that of the strain Ec-PAM cultured under the same conditions.

A shortcut to carbon-neutral bioplastic production: Recent advances in microbial production of polyhydroxyalkanoates from C1 resources

Since the 20th century, plastics that are widely being used in general life and industries are causing enormous plastic waste problems since improperly discarded plastics barely degrade and decompose. Thus, the demand for polyhydroxyalkanoates (PHAs), biodegradable polymers with material properties similar to conventional petroleum-based plastics, has been increased so far. The microbial production of PHAs is an environment-friendly solution for the current plastic crisis, however, the carbon sources for the microbial PHA production is a crucial factor to be considered in terms of carbon-neutrality. One‑carbon (C1) resources, such as methane, carbon monoxide, and carbon dioxide, are greenhouse gases and are abundantly found in nature and industry. C1 resources as the carbon sources for PHA production have a completely closed carbon loop with much advances; i) fast carbon circulation with direct bioconversion process and ii) simple fermentation procedure without sterilization as non-preferable nutrients. This review discusses the biosynthesis of PHAs based on C1 resource utilization by wild-type and metabolically engineered microbial host strains via biorefinery processes.

Biosynthesis pathways and strategies for improving 3-hydroxypropionic acid production in bacteria

3-Hydroxypropionic acid (3-HP) represents an economically important platform compound from which a panel of bulk chemicals can be derived. Compared with petroleum-dependent chemical synthesis, bioproduction of 3-HP has attracted more attention due to utilization of renewable biomass. This review outlines bacterial production of 3-HP, covering aspects of host strains (e.g., Escherichia coli and Klebsiella pneumoniae), metabolic pathways, key enzymes, and hurdles hindering high-level production. Inspired by the state-of-the-art advances in metabolic engineering and synthetic biology, we come up with protocols to overcome the hurdles constraining 3-HP production. The protocols range from rewiring of metabolic networks, alleviation of metabolite toxicity, to dynamic control of cell size and density. Especially, this review highlights the substantial contribution of microbial growth to 3-HP production, as we recognize the synchronization between cell growth and 3-HP formation. Accordingly, we summarize the following growth-promoting strategies: (i) optimization of fermentation conditions; (ii) construction of gene circuits to alleviate feedback inhibition; (iii) recruitment of RNA polymerases to overexpress key enzymes which in turn boost cell growth and 3-HP production. Lastly, we propose metabolic engineering approaches to simplify downstream separation and purification. Overall, this review aims to portray a picture of bacterial production of 3-HP.

Improved production of 3-hydroxypropionic acid in engineered Escherichia coli by rebalancing heterologous and endogenous synthetic pathways

To improve 3-hydroxypropionic acid (3-HP) production by Escherichia coli, glycerol accumulation needs to be reduced. To accomplish this, we constructed a novel E. coli strain that overexpresses the endogenous aldehyde dehydrogenase gene (puuC) under the control of a strong promoter. The fermentation performance of the engineered strain was significantly improved compared to that of the parental control strain in the presence of glucose and xylose. We also inactivated the puu operon repressor gene, puuR, which resulted in a decrease in glycerol accumulation and an increase in 3-HP production through the co-fermentation of glucose and xylose. Through fed-batch fermentation by utilizing glucose and xylose, the engineered strain, JHS_Δgypr-PT7, produced 53.7 g/L 3-HP and accumulated 1.5 g/L glycerol. This combination strategy, wherein we overexpressed the endogenous puuC gene from a strong promoter and eliminate its transcriptional repression, may be extended to rebalance another biochemical pathway.

Proteomics-Based Mechanistic Investigation of Escherichia coli Inactivation by Pulsed Electric Field

The pulsed electric field (PEF) technology has been widely applied to inactivate pathogenic bacteria in food products. Though irreversible pore formation and membrane disruption is considered to be the main contributing factor to PEF's sterilizing effects, the exact molecular mechanisms remain poorly understood. In this study, by using mass spectrometry (MS)-based label-free quantitative proteomic analysis, we compared the protein profiles of PEF-treated and untreated Escherichia coli. We identified a total of 175 differentially expressed proteins, including 52 candidates that were only detected in at least two of the three samples in one experiment group but not in the other group. Functional analysis revealed that the differential proteins were primarily involved in the regulation of cell membrane composition and integrity, stress response, as well as various metabolic processes. Quantitative reverse-transcription polymerase chain reaction (qRT-PCR) analysis was conducted on the genes of selected differential proteins at varying PEF intensities, which were known to result in different cell killing levels. The qRT-PCR data confirmed that the proteomic results could be reliably used for further data interpretation, and that the changes in the expression levels of the differential candidates were, to a large extent, caused directly by the PEF treatment. The findings of the current study offered valuable insight into PEF-induced cell inactivation.

Screening, identification, and low-energy ion modified breeding of a yeast strain producing high level of 3-hydroxypropionic acid

3-Hydroxypropionic acid (3HP) is an important platform chemical with a wide range of applications. The biological preparation of this compound is safe and low cost. In this study, orchard soil and human waste were used as raw materials to screen microbial strains that could produce 3HP in selective medium containing varying amounts of propionic acid. A yeast strain that can use propionic acid as substrate and produce 48.96 g/L 3HP was screened. Morphological observation, physiological and biochemical identification, and 26s rDNA sequencing identified the IS451 strain as Debaryomyces hansenii. The low-energy ion N⁺ , with the energy of 10 keV and a dose of 70 × 2.6 × 10¹³  ions/cm² , was implanted into the IS451 strain. The mutant strain WT39, whose 3HP titer reached 62.42 g/L, was obtained. The strain exhibited genetic stability and tolerance to high concentrations of propionic acid and was considered to have broad application prospects.

Enhanced production of 3-hydroxypropionic acid from glucose and xylose by alleviation of metabolic congestion due to glycerol flux in engineered Escherichia coli

Among platform chemicals obtained from renewable biomass, 3-hydroxypropionic acid (3-HP) has attracted considerable attention. A GC/TOF-MS study revealed that the intracellular metabolites of the TCA cycle and fatty acid synthesis increased in JHS01302, a galP-overexpressing strain of Escherichia coli, during glucose and xylose co-fermentation. Decreased intracellular glycerol levels and increased intracellular biosynthesis of 3-HP were also detected in the strain. Based on these results, the yeast GPD1 gene was replaced with the endogenous gpsA gene to modulate the rate of glycerol metabolism. In flask cultures, JHS01304 containing the gpsA gene displayed 43% lower glycerol accumulation and 52% higher 3-HP production than the control. JHS01304 produced 37.6 g/L 3-HP with a productivity rate of 0.63 g/L/h and yield of 0.17 g/g in the fed-batch fermentation. The metabolome analysis provided valuable information for alleviating the metabolic burden of glycerol flux to improve the production of 3-HP during glucose and xylose co-fermentation.

Screening, expression, purification and characterization of CoA-transferases for lactoyl-CoA generation

Lactoyl-CoA is critical for the biosynthesis of biodegradable and biocompatible lactate-based copolymers, which have wide applications. However, reports on acetyl-CoA: lactate CoA-transferases (ALCTs) are rare. To exploit novel ALCTs, amino acid sequence similarity searches based on the CoA-transferases from Clostridium propionicum and Megasphaera elsdenii were conducted. Two known and three novel enzymes were expressed, purified and characterized. Three novel ALCTs were identified, one each from Megasphaera sp. DISK 18, Clostridium lactatifermentans An75 and Firmicutes bacterium CAG: 466. ME-PCT from Megasphaera elsdenii had the highest catalytic efficiency for both acetyl-CoA (264.22 s^-1 mM^-1) and D-lactate (84.18 s^-1 mM^-1) with a broad temperature range for activity and good stability. This study, therefore, offers novel and efficient enzymes for lactoyl-CoA generation. To our best knowledge, this is the first report on the systematic mining of ALCTs, which offers valuable new tools for the engineering of pathways that rely on these enzymes.

Establishing synthesis pathway-host compatibility via enzyme solubility

Current pathway synthesis tools identify possible pathways that can be added to a host to produce the desired target molecule through the exploration of abstract metabolic and reaction network space. However, not many of these tools explore gene-level information required to physically realize the identified synthesis pathways, and none explore enzyme-host compatibility. Developing tools that address this disconnect between abstract reactions/metabolic design space and physical genetic sequence design space will enable expedited experimental efforts that avoid exploring unprofitable synthesis pathways. This work describes a workflow, termed Probabilistic Pathway Assembly with Solubility Confidence Scores (ProPASS), which links synthesis pathway construction with the exploration of the physical design space as imposed by the availability of enzymes with predicted characterized activities within the host. Predicted protein solubility propensity scores are used as a confidence level to quantify the compatibility of each pathway enzyme with the host Escherichia coli (E. coli). This study also presents a database, termed Protein Solubility Database (ProSol DB), which provides solubility confidence scores in E. coli for 240,016 characterized enzymes obtained from UniProtKB/Swiss-Prot. The utility of ProPASS is demonstrated by generating genetic implementations of heterologous synthesis pathways in E. coli that target several commercially useful biomolecules.

Efficient production of 3-hydroxypropionate from fatty acids feedstock in Escherichia coli

The production of chemicals from renewable biomass resources is usually limited by factors including high-cost processes and low efficiency of biosynthetic pathways. Fatty acids (FAs) are an ideal alternative biomass. Their advantages include high-efficiently producing acetyl-CoA and reducing power, coupling chemical production with CO₂ fixation, and the fact that they are readily obtained from inexpensive feedstocks. The important platform chemical 3-hydroxypropionate (3HP) can be produced from FAs as the feedstock with a theoretical yield of 2.49 g/g, much higher than the theoretical yield from other feedstocks. In this study, we first systematically analyzed the limiting factors in FA-utilization pathways in Escherichia coli. Then, we optimized FA utilization in Escherichia coli by using a combination of metabolic engineering and optimization of fermentation conditions. The 3HP biosynthesis module was introduced into a FA-utilizing strain, and the flux balance was finely optimized to maximize 3HP production. The resulting strain was able to produce 3HP from FAs with a yield of 1.56 g/g, and was able to produce 3HP to a concentration of 52 g/L from FAs in a 5-L fermentation process. The strain also could produce 3HP from various type of FAs feedstock including gutter oil. This is the first report of a technique for the efficient production of the platform chemical 3HP from FAs.

Effect of long-distance transportation on serum metabolic profiles of steer calves

Long-distance transportation is sometimes inevitable in the beef industry because of the geographic separation of major breeding and fattening areas. Long-distance transportation negatively impacts production and health of cattle, which may, at least partly, result from the disturbance of metabolism during and after transportation. However, alteration of metabolism remains elusive in transported cattle. We investigated the effects of transportation on the metabolomic profiles of Holstein steer calves. Non-targeted analysis of serum concentrations of low molecular weight metabolites was performed by gas chromatography mass spectrometry. Transportation affected 38 metabolites in the serum. A pathway analysis suggested that 26, 10, and 10 pathways were affected immediately after transportation, and 3 and 7 days after transportation, respectively. Some pathways were disturbed only immediately after transportation, likely because of feed and water withdrawal during transit. Nicotinate and nicotinamide metabolism, and citric acid cycle were affected for 3 days after transportation, whereas propionate metabolism, phenylalanine and tyrosine metabolism were affected throughout the experiment. Four pathways were not affected immediately after transportation, but were altered thereafter. These results suggested that many metabolic pathways had marked perturbations during transportation. Metabolites such as citric acid, propionate, tyrosine and niacin can be candidate supplements for mitigating transportation-induced adverse effects.

Characterisation of a 3-hydroxypropionic acid-inducible system from Pseudomonas putida for orthogonal gene expression control in Escherichia coli and Cupriavidus necator

3-hydroxypropionic acid (3-HP) is an important platform chemical used as a precursor for production of added-value compounds such as acrylic acid. Metabolically engineered yeast, Escherichia coli, cyanobacteria and other microorganisms have been developed for the biosynthesis of 3-HP. Attempts to overproduce this compound in recombinant Pseudomonas denitrificans revealed that 3-HP is consumed by this microorganism using the catabolic enzymes encoded by genes hpdH, hbdH and mmsA. 3-HP-inducible systems controlling the expression of these genes have been predicted in proteobacteria and actinobacteria. In this study, we identify and characterise 3-HP-inducible promoters and their corresponding LysR-type transcriptional regulators from Pseudomonas putida KT2440. A newly-developed modular reporter system proved possible to demonstrate that PpMmsR/P_mmsA and PpHpdR/P_hpdH are orthogonal and highly inducible by 3-HP in E. coli (12.3- and 23.3-fold, respectively) and Cupriavidus necator (51.5- and 516.6-fold, respectively). Bioinformatics and mutagenesis analyses revealed a conserved 40-nucleotide sequence in the hpdH promoter, which plays a key role in HpdR-mediated transcription activation. We investigate the kinetics and dynamics of the PpHpdR/P_hpdH switchable system in response to 3-HP and show that it is also induced by both enantiomers of 3-hydroxybutyrate. These findings pave the way for use of the 3-HP-inducible system in synthetic biology and biotechnology applications.

Nitrile-hydrolyzing enzyme from Meyerozyma guilliermondii and its potential in biosynthesis of 3-hydroxypropionic acid

3-Hydroxypropionic acid (3-HP) is an important platform chemical in organic synthesis. Traditionally, 3-HP was produced by chemical methods and fermentation process. In this work, a novel enzymatic method was developed for green synthesis of 3-HP. A yeast strain harboring nitrile-hydrolyzing enzyme was newly isolated from environmental samples using 3-hydroxypropionitrile (3-HPN) as the sole nitrogen source. It was identified to be Meyerozyma guilliermondii CGMCC12935 by sequencing of the 18S ribosomal DNA and internal transcribed spacer, together with analysis of the morphology characteristics. The catalytic properties of M. guilliermondii CGMCC12935 resting cells were determined, and the optimum activity was achieved at 55 °C and pH 7.5. The enzyme showed broad substrate specificity towards nitriles, especially 3-HPN, aminoacetonitrile and 3-cyanopyridine. The presence of Ag⁺, Pb²⁺ and excess substrate inhibited the enzyme activity, whereas 5% (v/v) ethyl acetate had a positive effect on the enzyme activity. M. guilliermondii CGMCC12935 resting cells by addition of 3% glucose could thoroughly hydrolyze 500 mM 3-HPN into 3-HP within 100 h and the maximal accumulative production of 3-HP reached 216.33 mM, which was over twofolds than the control group with no additional glucose. And this work would lay the foundation for biological production of 3-HP in industry.