Direct Effective Dose Calculations in Pediatric Fluoroscopy-Guided Abdominal Interventions with Rando-Alderson Phantoms - Optimization of Preset Parameter Settings

Age-specific Dose Catalog for Diagnostic Fluoroscopy and Fluoroscopically Guided Interventional Procedures from a Pediatric Hospital

Background Fluoroscopy is an imaging modality associated with a wide range of dose levels, characterized using a variety of dose metrics, including effective dose. However, for clinical procedures, effective dose is a seldom-used and unregulated metric in the United States, and thus, it is not extensively studied in radiology despite potentially large clinical implications for patients, especially children and infants. Purpose To formulate and report a dose catalog across all diagnostic and interventional radiology (IR) fluoroscopy examination or procedure types at a specialized tertiary care pediatric hospital. Materials and Methods In this retrospective study, dose metrics taken from radiation dose structured reports of fluoroscopy between October 2014 and March 2023 were analyzed. The reports included fluoroscopy across 18 diagnostic examination types and 24 IR procedure types. The National Cancer Institute dosimetry system for Radiography and Fluoroscopy Monte Carlo software was used to estimate age-specific effective dose from dose-area product (DAP). The DAP-to-effective dose conversion factors were estimated per IR procedure type and diagnostic fluoroscopy examination type based on age. Results A total of 11 536 individual diagnostic fluoroscopy examinations (18 types) and 8017 individual IR procedures (24 types) were analyzed. Median effective dose values per diagnostic fluoroscopy examination type ranged from 0.0010 to 0.44 mSv (mean, 0.0808 mSv ± 0.0998 [SD]). Calculated DAP-to-effective dose conversion factors ranged from 0.04 to 2.48 mSv/Gy · cm2 (mean, 0.758 mSv/Gy · cm2 ± 0.614) across all diagnostic fluoroscopy examination types. Median effective dose values per IR procedure type ranged from 0.0007 to 3.90 mSv (mean, 0.6757 mSv ± 0.8989). Calculated DAP-to-effective dose conversion factors ranged from 0.001 to 0.87 mSv/Gy · cm2 (mean, 0.210 mSv/Gy · cm2 ± 0.235) across all IR procedure types. Conclusion A pediatric fluoroscopy dose catalog was created, including age-specific effective dose, using a repeatable robust method based on accurate clinical data. © RSNA, 2024 Supplemental material is available for this article. See also the editorial by Borrego and Balter in this issue.

USE OF ANTHROPOMORPHIC HETEROGENEOUS PHYSICAL PHANTOMS FOR VALIDATION OF COMPUTATIONAL DOSIMETRY OF MEDICAL PERSONNEL AND PATIENTS

In the dosimetry of ionizing radiation, the phantoms of the human body, which are used as a replacement for thehuman body in physical measurements and calculations, play an important, but sometimes underestimated, role.There are physical phantoms used directly for measurements, and mathematical phantoms for computationaldosimetry. Their complexity varies from simple geometry applied for calibration purposes up to very complex, whichsimulates in detail the shapes of organs and tissues of the human body. The use of physical anthropomorphic phantoms makes it possible to effectively optimize radiation doses by adjusting the parameters of CT-scanning (computed tomography) in accordance with the characteristics of the patient without compromising image quality. The useof phantoms is an indispensable approach to estimate the actual doses to the organs or to determine the effectivedose of workers - values that are regulated, but cannot be directly measured.The article contains an overview of types, designs and the fields of application of anthropomorphic heterogeneousphysical phantoms of a human with special emphasis on their use for validation of models and methods of computational dosimetry.

Additively Manufactured Patient-Specific Anthropomorphic Thorax Phantom With Realistic Radiation Attenuation Properties

Conventional medical imaging phantoms are limited by simplified geometry and radiographic skeletal homogeneity, which confines their usability for image quality assessment and radiation dosimetry. These challenges can be addressed by additive manufacturing technology, colloquially called 3D printing, which provides accurate anatomical replication and flexibility in material manipulation. In this study, we used Computed Tomography (CT)-based modified PolyJet^TM 3D printing technology to print a hollow thorax phantom simulating skeletal morphology of the patient. To achieve realistic heterogenous skeletal radiation attenuation, we developed a novel radiopaque amalgamate constituting of epoxy, polypropylene and bone meal powder in twelve different ratios. We performed CT analysis for quantification of material radiodensity (in Hounsfield Units, HU) and for identification of specific compositions corresponding to the various skeletal structures in the thorax. We filled the skeletal structures with their respective radiopaque amalgamates. The phantom and isolated 3D printed rib specimens were rescanned by CT for reproducibility tests regarding verification of radiodensity and geometry. Our results showed that structural densities in the range of 42–705HU could be achieved. The radiodensity of the reconstructed phantom was comparable to the three skeletal structures investigated in a real patient thorax CT: ribs, ventral vertebral body and dorsal vertebral body. Reproducibility tests based on physical dimensional comparison between the patient and phantom CT-based segmentation displayed 97% of overlap in the range of 0.00–4.57 mm embracing the anatomical accuracy. Thus, the additively manufactured anthropomorphic thorax phantom opens new vistas for imaging- and radiation-based patient care in precision medicine.

Quantitative Evaluation of Peripheral Arterial Blood Flow Using Peri-Interventional Fluoroscopic Parameters: An In Vivo Study Evaluating Feasibility and Clinical Utility

Purpose

The purpose of this study was to evaluate various objective, quantitative, time-resolved fluoroscopic imaging parameters for use in the peri-interventional evaluation of stenotic peripheral arterial disease lesions. Material and Methods. Ten patients (median age, 64; age range, 52 to 79; 8 males, 2 females) with high-grade stenoses of either the superficial femoral or popliteal arteries who underwent endovascular treatment were included. During each intervention, two series of intraprocedural fluoroscopic images were collected, one preintervention and one postintervention. For each imaging series, four regions of interest (ROIs) were defined within the vessel lumen, with two ROIs being proximal (ROIs 1 and 2) and two being distal (ROIs 3 and 4) to the stenosis. The time-density curve (TDC) at each ROI was measured, and the resulting area under the curve (AUC), full width at half maximum (FWHM), and time-to-peak (TTP) were then calculated.

Results

The analysis of the TDC-derived parameters demonstrated significant differences between pre- and postinterventional flow rates in the ROI placed most distal to the stenosis, ROI 4. The AUC at ROI 4 (reported as a relative percentage of the AUC measured at ROI 1 proximal to the lesion) demonstrated a significant increase in the total flow (mean 67.84% vs. 128.68%, p=0.003). A significant reduction in FWHM at ROI 4 (mean 2.93 s vs. 1.87 s, p=0.003). A significant reduction in FWHM at ROI 4 (mean 2.93 s vs. 1.87 s, p=0.003). A significant reduction in FWHM at ROI 4 (mean 2.93 s vs. 1.87 s.

Conclusion

AUC, FWHM, and TTP are objective, reproducible, quantifiable tools for the peri-interventional fluoroscopic evaluation of vessel stenoses. When compared to the standard subjective interpretation of fluoroscopic imagery, AUC, FWHM, and TTP offer interventionalists the advantage of having an objective, complementary method of evaluating the success of a procedure, potentially allowing for more precisely targeted and quantitatively determined treatment goals and improved patient outcomes. This retrospective study was approved by the local ethics committee under the Number 372/2018BO2. The trial was registered at the German clinical trials register under the number DRKS00017813.

Impact of low dose settings on radiation exposure during pediatric fluoroscopic guided interventions

PURPOSE

To evaluate the effects of lowering the detector entrance exposure in children undergoing interventional radiology procedures.

MATERIALS AND METHODS

The study retrospectively investigated radiation dose levels in pediatric patients aged 0-18 years before (n = 39) and after (n = 26) lowering detector entrance dose, undergoing embolization of peripheral Arteriovenous malformations, Portal Vein Interventions or Percutaneous Transhepatic Cholangio Drainage (PTCD) between 2014 and 2017. Patient characteristics, fluoroscopy time, protocols used as well as resulting Skin Dose and Dose Area Product (DAP) were compared in each cohort. Image quality was assessed by two independent readers.

RESULTS

The two patient cohorts did not differ in terms of patient demographics. Similarly, fluoroscopy time did not differ before and after implementation of the low dose settings. An overall reduction of skin dose of 75.1% for AVM embolizations, 80.5% for Portal Vein Interventions and 85.3% for PTCD placement was observed. The DAP decrease was 82.5% for AVM embolizations, 72.2% for Portal Vein Interventions and 79.8% for PTCD placement. Image quality was generally considered to be good with an insignificant difference between pre and post implementation of the low dose approach and good agreement between the two readers. Manual inroom-switching to higher dose levels was possible, however this was not performed more frequently after implementation of the low dose settings.

CONCLUSION

Lowering the detector entrance dose in pediatric interventional radiology procedures results in a significant decrease of the radiation dose burden.