Aggregation and interfacial phenomenon of amphiphilic drug under the influence of pharmaceutical excipients (green/biocompatible gemini surfactant)

Mixed Oxime-Functionalized IL/16-s-16 Gemini Surfactants System: Physicochemical Study and Structural Transitions in the Presence of Promethazine as a Potential Chiral Pollutant

The increasing concern about chiral pharmaceutical pollutants is connected to environmental contamination causing both chronic and acute harmful effects on living organisms. The design and application of sustainable surfactants in the remediation of polluted sites require knowledge of partitioning between surfactants and potential pollutants. The interfacial and thermodynamic properties of two gemini surfactants, namely, alkanediyi-α,ω-bis(dimethylhexadecyl ammonium bromide) (16-s-16, where s = 10, 12), were studied in the presence of the inherently biodegradable oxime-functionalized ionic liquid (IL) 4-((hydroxyimino)methyl)-1-(2-(octylamino)-2-oxoethyl)pyridin-1-ium bromide (4-PyC8) in an aqueous solution using surface tension, conductivity, fluorescence, FTIR and 1H NMR spectroscopic techniques. The conductivity, surface tension and fluorescence measurements indicated that the presence of the IL 4-PyC8 resulted in decreasing CMC and facilitated the aggregation process. The various thermodynamic parameters, interfacial properties, aggregation number and Stern–Volmer constant were also evaluated. The IL 4-PyC8-gemini interactions were studied using DLS, FTIR and NMR spectroscopic techniques. The hydrodynamic diameter of the gemini aggregates in the presence of promethazine (PMZ) as a potential chiral pollutant and the IL 4-PyC8 underwent a transition when the drug was added, from large aggregates (270 nm) to small micelles, which supported the gemini:IL 4-PyC8:promethazine interaction. The structural transitions in the presence of promethazine may be used for designing systems that are responsive to changes in size and shape of the aggregates as an analytical signal for selective detection and binding pollutants.

Mixed Oxime-Functionalized IL/16-s-16 Gemini Surfactants System: Physicochemical Study and Structural Transitions in the Presence of Promethazine as a Potential Chiral Pollutant

The increasing concern about chiral pharmaceutical pollutants is connected to environmental contamination causing both chronic and acute harmful effects on living organisms. The design and application of sustainable surfactants in the remediation of polluted sites require knowledge of partitioning between surfactants and potential pollutants. The interfacial and thermodynamic properties of two gemini surfactants, namely, alkanediyi-α,ω-bis(dimethylhexadecyl ammonium bromide) (16-s-16, where s = 10, 12), were studied in the presence of the inherently biodegradable oxime-functionalized ionic liquid (IL) 4-((hydroxyimino)methyl)-1-(2-(octylamino)-2-oxoethyl)pyridin-1-ium bromide (4-PyC8) in an aqueous solution using surface tension, conductivity, fluorescence, FTIR and 1H NMR spectroscopic techniques. The conductivity, surface tension and fluorescence measurements indicated that the presence of the IL 4-PyC8 resulted in decreasing CMC and facilitated the aggregation process. The various thermodynamic parameters, interfacial properties, aggregation number and Stern–Volmer constant were also evaluated. The IL 4-PyC8-gemini interactions were studied using DLS, FTIR and NMR spectroscopic techniques. The hydrodynamic diameter of the gemini aggregates in the presence of promethazine (PMZ) as a potential chiral pollutant and the IL 4-PyC8 underwent a transition when the drug was added, from large aggregates (270 nm) to small micelles, which supported the gemini:IL 4-PyC8:promethazine interaction. The structural transitions in the presence of promethazine may be used for designing systems that are responsive to changes in size and shape of the aggregates as an analytical signal for selective detection and binding pollutants.

Investigation of micellar and interfacial phenomenon of amitriptyline hydrochloride with cationic ester-bonded gemini surfactant mixture in different solvent media

Herein, the interaction among the antidepressant drug amitriptyline hydrochloride (AMT) and a green gemini surfactant, ethane-1, 2-diyl bis(N,N-dimethyl-N-tetradecylammoniumacetoxy) dichloride (14-E2-14), via numerous techniques such as tensiometry, fluorimetry, FT-IR and UV-visible spectroscopy in three different media (aqueous 0.050 mol·kg^-1 NaCl, 0.50 and 1.0 mol·kg^-1 urea) were investigated. AMT is used to treat mental illness or mood problems, such as depression. The aggregation of biologically active ingredients can enhance the bioavailability of hydrophobic drugs. A significant interaction between AMT and 14-E2-14 was detected by tensiometric study as the critical micelle concentration (cmc) of AMT+14-E2-14 is reduced upon an increase of mole fraction (α₁) of 14-E2-14. The decrease in cmc indicates the nonideality of studied mixtures of different compositions. Although, employed drug AMT is freely soluble in the aqueous and non-aqueous system but is not hydrophobic enough to act as its carrier. Instead, gemini surfactant formed spherical micelles in an aqueous system and their high solubilization capability, as well as their relatively lower cmc value, makes them highly stable in vivo. The cmc values of AMT+14-E-14 mixtures in all cases were further decreased and increased in NaCl and urea solutions respectively as compared with the aqueous system. Numerous micellar, interfacial, and thermodynamic parameters have been measured by applying various theoretical models. The obtained changes in the physicochemical assets of AMT upon adding of 14-E2-14 are likely to enhance the industrial and pharmaceutical applications of gemini surfactants. The negative interaction parameters (β^m and β^σ), indicate synergistic attraction is occurring in the mixed systems. The aggregation number (N_agg), Stern–Volmer constant (K_sv), etc. are attained through the fluorescence method, also supporting the attractive interaction behavior of AMT+14-E2-14 mixtures in all solvents. The N_agg was found to increase in the salt solution and decrease in the urea system compared with the aqueous solution. FT-IR and UV-visible analysis also depict the interaction between the constituent alike tensiometry and fluorimetry methods. The results suggested that gemini surfactants may serve as a capable drug delivery agent for antidepressants, improving their bioavailability.

Conductivity, Surface Tension, and Comparative Antibacterial Efficacy Study of Different Brands of Soaps of Nepal

The current study aims to evaluate the solution properties and antibacterial efficacy study of five different brands of toilet soaps of Nepal such as Okhati (OKT), Lifebuoy (LFBY), Lux (LX), Liril (LRL), and Chiuree Neem (NM). The evaluation of critical micelle concentration (CMC) and their thermodynamics and surface properties are also reported. This study was further extended to evaluate antibacterial efficacy against three pathogenic bacteria such as Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), and Proteus vulgaris (P. vulgaris) by disc diffusion technique, and it was done at four different concentrations of soap. The bioactive ingredients present in them provide antibacterial potency to cure various skin problems caused by bacterial pathogens. Similarly, the antibacterial potency of LFBY was found higher than other soaps. Based on these studies, we can simply take LFBY soap at the highest rank in regards to antibacterial sensitivity.

Study on surface properties of sodiumdodecyl sulfate and dodecyltrimethylammonium bromide mixed surfactants and their interaction with dyes

The antagonistic as well as synergetic interaction for dodecyltrimethylammonium bromide (DTAB) and sodiumdodecyl sulfate (SDS) mixed surfactants by using surface tension are investigated on the basis of the results obtained earlier, the efficiency of adsorption (pC₂₀), aggregation number (N), ΓΓmax, effective Gibbs free energy (ΔGeffo) and CMCC20 are calculated additionally with three different temperatures at T = 293.15, 298.15 and 303.15 K as the detailed surface properties. The binding constants and standard free energy change of SDS and DTAB mixture with the interaction of (2.5× 10⁻⁵ mol L^–1 of methyl orange, MO and methylene blue, MB) are carried out by using UV-Vis spectroscopy at room temperature by using different models. The closer values of the binding constants and standard free energy change for SDS and DTAB mixture with the interaction of MO and MB are included in our investigations.

Self-assembly of sodium dodecylsulfate and dodecyltrimethylammonium bromide mixed surfactants with dyes in aqueous mixtures

The micellar property of mixed surfactant systems, cationic (dodecyltrimethylammonium bromide, DTAB) and anionic (sodium dodecylsulfate, SDS) surfactants with variable molar ratios in aqueous system has been reported by using surface tension and conductivity measurements at T = 293.15, 298.15 and 303.15 K. DTAB concentrations are varied from 1.0 × 10^-4 to 3 × 10^-4 mol l^-1 in 1.0 × 10^-2 mol l^-1 SDS solution while the SDS concentration is varied from 1.0 × 10^-3 to 1.5 × 10^-2 mol l^-1 in approximately 5.0 × 10^-3 mol l^-1 DTAB, so that such concentrations of DTAB-SDS (DTAB-rich) and SDS-DTAB (SDS-rich) solutions were chosen 3 : 1 ratio. The critical micellar concentration, as well as surface and thermodynamic properties for DTAB-rich and SDS-rich solutions, were evaluated by the surface tension (γ) and conductivity (κ) methods. The pseudo phase separation model was coupled with the dissociated Margules model for synergism. The Krafft temperature behaviour and optical analysis of mixed surfactants are studied using conductivity and UV-Vis spectroscopy, respectively. The dispersibility and stability of DTAB-rich and SDS-rich solutions with and without dyes (2.5 × 10^-5 mol l^-1 of methyl orange and methylene blue) are carried out by using UV-Vis spectroscopy and dynamic light scattering.