Techno-functional and 3D shape analysis applied for investigating the variability of backed tools in the Late Middle Paleolithic of Central Europe

Automatic analysis of the continuous edges of stone tools reveals fundamental handaxe variability

The edges of stone tools have significant technological and functional implications. The nature of these edges-their sharpness, whether they are concave or convex, and their asymmetry-reflect how they were made and how they could be used. Similarly, blunt portions of a tool's perimeter hint at how they could have been grasped or hafted and in which directions force could be applied. However, due to the difficulty in accurately measuring the complex 3D geometry of tool edges with traditional methods, their attributes are often overlooked. When they are analyzed, they have traditionally been assessed with visual qualitative categories or unreliable physical measurements. We introduce new computational 3D methods for automatically and repeatably measuring key attributes of stone tool edges. These methods allow us to automatically identify the 3D perimeter of tools, segment this perimeter according to changes in edge angles, and measure these discrete edge segments with a range of metrics. We test this new computational toolkit on a large sample of 3D models of handaxes from the later Acheulean of the southern Levant. Despite these handaxes being otherwise technologically and morphologically similar, we find marked differences in the amount of knapped outline, edge angle, and the concavity of their edges. We find many handaxes possess blunt portions of perimeter, suitable for grasping, and some handaxes even possess more than one discrete sharp edge. Among our sample, sites with longer occupations and more diverse toolkits possessed handaxes with more diverse edges. Above all, this paper offers new methods for computing the complex 3D geometry of stone tool edges that could be applied to any number of artifact types. These methods are fully automated, allowing the analysis and visualization of entire assemblages.

The contribution of integrated 3D model analysis to Protoaurignacian stone tool design

Protoaurignacian foragers relied heavily on the production and use of bladelets. Techno-typological studies of these implements have provided insights into crucial aspects of cultural variability. However, new technologies have seldom been used to quantify patterns of stone tool design. Taking advantage of a new scanning protocol and open-source software, we conduct the first 3D analysis of a Protoaurignacian assemblage, focusing on the selection and modification of blades and bladelets. We study a large dataset of complete blanks and retouched tools from the early Protoaurignacian assemblage at Fumane Cave in northeastern Italy. Our main goal is to validate and refine previous techno-typological considerations employing a 3D geometric morphometrics approach complemented by 2D analysis of cross-section outlines and computation of retouch angle. The encouraging results show the merits of the proposed integrated approach and confirm that bladelets were the main focus of stone knapping at the site. Among modified bladelets, various retouching techniques were applied to achieve specific shape objectives. We suggest that the variability observed among retouched bladelets relates to the design of multi-part artifacts that need to be further explored via renewed experimental and functional studies.

Practical and technical aspects for the 3D scanning of lithic artefacts using micro-computed tomography techniques and laser light scanners for subsequent geometric morphometric analysis. Introducing the StyroStone protocol

Here, we present a new method to scan a large number of lithic artefacts using three-dimensional scanning technology. Despite the rising use of high-resolution 3D surface scanners in archaeological sciences, no virtual studies have focused on the 3D digitization and analysis of small lithic implements such as bladelets, microblades, and microflakes. This is mostly due to difficulties in creating reliable 3D meshes of these artefacts resulting from several inherent features (i.e., size, translucency, and acute edge angles), which compromise the efficiency of structured light or laser scanners and photogrammetry. Our new protocol StyroStone addresses this problem by proposing a step-by-step procedure relying on the use of micro-computed tomographic technology, which is able to capture the 3D shape of small lithic implements in high detail. We tested a system that enables us to scan hundreds of artefacts together at once within a single scanning session lasting a few hours. As also bigger lithic artefacts (i.e., blades) are present in our sample, this protocol is complemented by a short guide on how to effectively scan such artefacts using a structured light scanner (Artec Space Spider). Furthermore, we estimate the accuracy of our scanning protocol using principal component analysis of 3D Procrustes shape coordinates on a sample of meshes of bladelets obtained with both micro-computed tomography and another scanning device (i.e., Artec Micro). A comprehensive review on the use of 3D geometric morphometrics in lithic analysis and other computer-based approaches is provided in the introductory chapter to show the advantages of improving 3D scanning protocols and increasing the digitization of our prehistoric human heritage.

Adaptive capacity and flexibility of the Neanderthals at Heidenschmiede (Swabian Jura) with regard to core reduction strategies

The branched reduction system at the Heidenschmiede described here is hitherto exceptional for the Middle Paleolithic of the Swabian Jura. By means of refits and supporting objects, we are able to describe a superordinate reduction system that combines several individual reduction concepts, such as Levallois and blade production, within one volume. In the Middle Paleolithic of the Swabian Jura, blade technology has thus far played a rather minor role. On the one hand, it is possible to split a selected volume (nodule) into three parts, which are reduced separately according to individual concepts. On the other hand, it is also possible to reduce parts of a volume with one concept first and then with another. The hypothetical reduction system can be branched or linear, thus emphasizing the technological flexibility in core reduction, which requires a high degree of cognitive skills of three-dimensional imagination.

The Lichtenberg Keilmesser - it's all about the angle

The presence of the ‘Keilmesser-concept’ in late Middle Paleolithic assemblages of Central and Eastern Europe defines the eponymous ‘Keilmessergruppen’. The site of Lichtenberg (Lower Saxony, Germany) was discovered in 1987 and yielded one of the most important Keilmessergruppen assemblages of the northwestern European Plain. At that time, researchers used the bifacial backed knives to define a new type, the ‘Lichtenberger Keilmesser’, which they characterized by an aesthetic form-function concept with a specific range of morphological variability on the one hand, and a standardized convex cutting edge one the other hand. Thereby, a shape continuum was observed between different form-function concepts in the Lichtenberg assemblage, from Keilmesser through to Faustkeilblätter and handaxes. In a contrasting view, it was recently suggested that the morphology of Keilmesser, including what is defined here as type Lichtenberg, is the result of solutions to establish and maintain edge angles during resharpening. With the intention to evaluate these contrasting hypotheses, I conducted a re-analysis of the Keilmesser from Lichtenberg and their relationship to central German late Middle Paleolithic knives, using 3D geometric morphometric analyses and an automatized approach to measure edge angles on 3D models. Despite a morphological overlap of the tools from both regions, I could show that the Lichtenberg Keilmesser concept refers to one solution to create a tool with specific functionalities, like potentially cutting, prehension, and reusability. To establish and maintain its functionality, certain angles where created by the knappers along the active edges. This behavior resulted in specific shapes and positions of the active parts and created what looks like a standardized or template morphology of this Keilmesser type.