PVP1-The People's Ventilator Project: A fully open, low-cost, pressure-controlled ventilator research platform compatible with adult and pediatric uses

Development and performance evaluation of a solenoid valve assisted low-cost ventilator on gas exchange and respiratory mechanics in a porcine model

INTRODUCTION

During the COVID-19 pandemic, ventilator shortages necessitated the development of new, low-cost ventilator designs. The fundamental requirements of a ventilator include precise gas delivery, rapid adjustments, durability, and user-friendliness, often achieved through solenoid valves. However, few solenoid-valve assisted low-cost ventilator (LCV) designs have been published, and gas exchange evaluation during LCV testing is lacking. This study describes the development and performance evaluation of a solenoid-valve assisted low-cost ventilator (SV-LCV) in vitro and in vivo, focusing on gas exchange and respiratory mechanics.

METHODS

The SV-LCV, a fully open ventilator device, was developed with comprehensive hardware and design documentation, utilizing solenoid valves for gas delivery regulation. Lung simulator testing calibrated tidal volumes at specified inspiratory and expiratory times, followed by in vivo testing in a porcine model to compare SV-LCV performance with a conventional ventilator.

RESULTS

The SV-LCV closely matched the control ventilator's respiratory profile and gas exchange across all test cycles. Lung simulator testing revealed direct effects of compliance and resistance changes on peak pressures and tidal volumes, with no significant changes in respiratory rate. In vivo testing demonstrated comparable gas exchange parameters between SV-LCV and conventional ventilator across all cycles. Specifically, in cycle 1, the SV-LCV showed arterial blood gas (ABG) results of pH 7.54, PCO2 34.5 mmHg, and PO2 91.7 mmHg, compared to the control ventilator's ABG of pH 7.53, PCO2 37.1 mmHg, and PO2 134 mmHg. Cycle 2 exhibited ABG results of pH 7.53, PCO2 33.6 mmHg, and PO2 84.3 mmHg for SV-LCV, and pH 7.5, PCO2 34.2 mmHg, and PO2 93.5 mmHg for the control ventilator. Similarly, cycle 3 showed ABG results of pH 7.53, PCO2 32.1 mmHg, and PO2 127 mmHg for SV-LCV, and pH 7.5, PCO2 35.5 mmHg, and PO2 91.3 mmHg for the control ventilator.

CONCLUSION

The SV-LCV provides similar gas exchange and respiratory mechanic profiles compared to a conventional ventilator. With a streamlined design and performance akin to commercially available ventilators, the SV-LCV presents a viable, readily available, and reliable short-term solution for overcoming ventilator supply shortages during crises.

Expanding research impact through engaging the maker community and collaborating with digital content creators

This paper proposes a method for increasing the impact of academic research by providing materials for public use, thus engaging the maker community, and by collaborating with internet content creators to extend the reach. We propose a framework for engagement and report a multi-year study that evaluates short, intermediate, and long-term outcomes, with a second effort to demonstrate repeatability of the short-term outcomes. In the first study, we posted forty-one 3D printable compliant mechanisms on public repositories and collaborated with physicist and content creator Derek Muller (Veritasium YouTube channel). Outputs and outcomes from this interaction were measured over 3 years. The framework was exercised again with four new 3D printable mechanisms in collaboration with engineer and STEM influencer Mark Rober. The proposed methods aim to help researchers extend the reach of their work to broader audiences, including professional engineers, hardware designers, educators, students, researchers, and hobbyists. This work demonstrates promising impacts of the framework, including (1) extending public awareness of research findings to broader audiences by engaging the maker community and collaborating with content creators, (2) accelerating the pace of innovation and further hardware-based research through public application of research findings, (3) fostering a culture of open-source design and collaboration among other researchers, engineers, educators, and makers, and (4) increasing utilization of peer-reviewed published content. These outreach practices can be valuable tools for researchers to increase impact of and excitement for their research.

Data science and its future in large neuroscience collaborations

The rise of large scientific collaborations in neuroscience requires systematic, scalable, and reliable data management. How this is best done in practice remains an open question. To address this, we conducted a data science survey among currently active U19 grants, funded through the NIH's BRAIN Initiative. The survey was answered by both data science liaisons and Principal Investigators, speaking for ~500 researchers across 21 nation-wide collaborations. We describe the tools, technologies, and methods currently in use, and identify several shortcomings of current data science practice. Building on this survey, we develop plans and propose policies to improve data collection, use, publication, reuse and training in the neuroscience community.

Maternal high-care and intensive care units in low- and middle-income countries

Despite notable advancements in minimizing maternal mortality during recent decades, a pronounced disparity persists between high-income nations and low-to middle-income countries (LMICs), particularly in intensive and high-care for pregnant and postpartum individuals. This divergence is multifactorial and influenced by factors such as the availability and accessibility of community-based maternity healthcare services, the quality of preventive care, timeliness in accessing hospital or critical care, resource availability, and facilities equipped for advanced interventions. Complications from various conditions, including human immunodeficiency virus (HIV), unsafe abortions, puerperal sepsis, and, notably, the COVID-19 pandemic, intensify the complexity of these challenges. In confronting these challenges and deliberating on potential solutions, we hope to contribute to the ongoing discourse around maternal healthcare in LMICs, ultimately striving toward an equitable health landscape where every mother, regardless of geographic location or socioeconomic status, has access to the care they require and deserve. The use of traditional and innovative methods to achieve adequate knowledge, appropriate skills, location of applicable resources, and strong leadership is essential. By implementing and enhancing these strategies, limited-resource settings can optimize the available resources to promptly recognize the severity of illness in obstetric individuals, ensuring timely and appropriate interventions for mothers and children. Additionally, strategies that could significantly improve the situation include increased investment in healthcare infrastructure, effective resource management, enhanced supply chain efficiency, and the development and use of low-cost, high-quality equipment. Through targeted investments, innovations, efficient resource management, and international cooperation, it is possible to ensure that every maternal high-care and ICU unit, regardless of geographical location or socioeconomic status, has access to high-quality critical care to provide life-saving care.

Overcoming supply disruptions during pandemics by utilizing found hardware for open source gentle ventilation

This article details the design of an open source emergency gentle ventilator (gentle-vent) framework that can be used in periods of scarcity. Although it is not a medical device, the system utilizes a wide range of commonly-available components that are combined using basic electronics skills to achieve the desired performance. The main function of the gentle-vent is to generate a calibrated pressure wave at the pump to provide support to the patient's breathing. Each gentle-vent permutation was tested using a DIY manometer as it would be utilized in the field in low-resource settings and validated with an open source VentMon. The most rudimentary implementation costs less than $40.

Respiratory distress syndrome management in resource limited settings-Current evidence and opportunities in 2022

The complications of prematurity are the leading cause of neonatal mortality worldwide, with the highest burden in the low- and middle-income countries of South Asia and Sub-Saharan Africa. A major driver of this prematurity-related neonatal mortality is respiratory distress syndrome due to immature lungs and surfactant deficiency. The World Health Organization's Every Newborn Action Plan target is for 80% of districts to have resources available to care for small and sick newborns, including premature infants with respiratory distress syndrome. Evidence-based interventions for respiratory distress syndrome management exist for the peripartum, delivery and neonatal intensive care period- however, cost, resources, and infrastructure limit their availability in low- and middle-income countries. Existing research and implementation gaps include the safe use of antenatal corticosteroid in non-tertiary settings, establishing emergency transportation services from low to high level care facilities, optimized delivery room resuscitation, provision of affordable caffeine and surfactant as well as implementing non-traditional methods of surfactant administration. There is also a need to optimize affordable continuous positive airway pressure devices able to blend oxygen, provide humidity and deliver reliable pressure. If the high prematurity-related neonatal mortality experienced in low- and middle-income countries is to be mitigated, a concerted effort by researchers, implementers and policy developers is required to address these key modalities.