Environmental Life Cycle Impacts of Automotive Batteries Based on a Literature Review

We compiled 50 publications from the years 2005–2020 about life cycle assessment (LCA) of Li-ion batteries to assess the environmental effects of production, use, and end of life for application in electric vehicles. Investigated LCAs showed for the production of a battery pack per kWh battery capacity a median of 280 kWh/kWh_bc (25%-quantile–75%-quantile: 200–500 kWh/kWh_bc) for the primary energy consumption and a median of 120 kg CO2-eq/kWh_bc (25%-quantile–75%-quantile: 70–175 kg CO2-eq/kWh_bc) for greenhouse gas emissions. We expect results for current batteries to be in the lower range. Over the lifetime of an electric vehicle, these emissions relate to 20 g CO2-eq/km (25%-quantile–75%-quantile: 10–50 g CO2-eq/km). Considering recycling processes, greenhouse gas savings outweigh the negative environmental impacts of recycling and can reduce the life cycle greenhouse gas emissions by a median value of 20 kg CO2-eq/kWh_bc (25%-quantile–75%-quantile: 5–29 kg CO2-eq/kWh_bc). Overall, many LCA results overestimated the environmental impact of cell manufacturing, due to the assessments of relatively small or underutilized production facilities. Material emissions, like from mining and especially processing from metals and the cathode paste, could have been underestimated, due to process-based assumptions and non-regionalized primary data. Second-life applications were often not considered.

Risk Assessment of a Battery-Powered High-Speed Ferry Using Formal Safety Assessment

Fully electric ships have been widely developed, investigated and evaluated by the maritime industry as a potential solution to respond to the emissions control required according to the International Maritime Organization (IMO). This study aims at presenting a novel approach to evaluate the safety level of a battery-powered high speed catamaran. Following the Formal Safety Assessment procedure, the risk assessment of the considered ship was conducted leading to the identification of the involved hazards along with the estimation of their frequency and consequences thus allowing for the identification of the most severe hazards. Fault tree analysis is carried out for and the identified top events followed by an event tree analysis to estimate the risk and safety level of the vessel. Furthermore, a cost-benefit assessment is conducted to evaluate the financial impact of selected risk control options. The derived results indicate that the application of battery power systems for high speed ferries exhibits low and acceptable accident frequencies. It is also supported the current regulation to carry out mandatory risk assessment for battery-powered ships.

Energy and environmental assessment of a traction lithium-ion battery pack for plug-in hybrid electric vehicles

Traction batteries are a key factor in the environmental sustainability of electric mobility and, therefore, it is necessary to evaluate their environmental performance to allow a comprehensive sustainability assessment of electric mobility. This article presents an environmental assessment of a lithium-ion traction battery for plug-in hybrid electric vehicles, characterized by a composite cathode material of lithium manganese oxide (LiMn₂O₄) and lithium nickel manganese cobalt oxide Li(Ni_xCo_yMn_1-x-y)O₂. Composite cathode material is an emerging technology that promises to combine the merits of several active materials into a hybrid electrode to optimize performance and reduce costs. In this study, the environmental assessment of one battery pack (with a nominal capacity of 11.4 kWh able to be used for about 140,000 km of driving) is carried out by using the Life Cycle Assessment methodology consistent with ISO 14040. The system boundaries are the battery production, the operation phase and recycling at the end of life, including the recovery of various material fractions. The composite cathode technology examined besides a good compromise between the higher and the lower performance of NMC and LMO cathodes, can present good environmental performances. The results of the analysis show that the manufacturing phase is relevant to all assessed impact categories (contribution higher than 60%). With regard to electricity losses due to battery efficiency and battery transport, the contribution to the use phase impact of battery efficiency is larger than that of battery transport. Recycling the battery pack contributes less than 11% to all of the assessed impact categories, with the exception of freshwater ecotoxicity (60% of the life cycle impact). The environmental credits related to the recovery of valuable materials (e.g. cobalt and nickel sulphates) and other metal fractions (e.g. aluminium and steel) are particularly relevant to impact categories such as marine eutrophication, human toxicity and abiotic resource depletion. The main innovations of this article are that (1) it presents the first bill of materials of a lithium-ion battery cell for plug-in hybrid electric vehicles with a composite cathode active material; (2) it describes one of the first applications of the life cycle assessment to a lithium-ion battery pack for plug-in hybrid electric vehicles with a composite cathode active material with the aim of identifying the "hot spots" of this technology and providing useful information to battery manufacturers on potentially improving its environmental sustainability; (3) it evaluates the impacts associated with the use phase based on primary data about the battery pack's lifetime, in terms of kilometres driven; and (4) it models the end-of-life phase of the battery components through processes specifically created for or adapted to the case study.