Facet-dependent haloperoxidase-like activities of CeO2 nanoparticles contribute to their excellent biofilm formation suppression abilities

Biofilms adhering to different surfaces have significant negative impacts in various fields. Cerium oxide nanoparticles can serve as mimics of haloperoxidase for biological biofilm inhibition applications. The regulation of the exposed facet of CeO2 nanoparticles influences their efficiency in various catalytic processes. However, there is still a lack of systematic studies on the facet-dependent haloperoxidase-like activity of CeO2. In the present study, the facet-dependent haloperoxidase activities and antibiofilm performance of CeO2 nanoparticles were elucidated through experiment analysis and density function theory calculation. The as-prepared CeO2 nanoparticles inhibited bacterial survival and catalyzed the oxidative bromination of quorum sensing signaling molecules, achieving biofilm inhibition performance. The antibacterial and biofilm formation suppression abilities were consistent with their haloperoxidase activities. The {111}- and {110}-facet CeO2 nanopolyhedra, as well as the {110}- and {100}-facet CeO2 nanorods, which had higher haloperoxidase activity showed better antibiofilm performance than the {100}-facet CeO2 cubes. The present findings provide a comprehensive understanding of the facet-dependent haloperoxidase-like activity of CeO2. Furthermore, engineering CeO2 morphologies with different crystal facets may represent a novel method for significantly adjusting their haloperoxidase-like activity.

ATP-triggered, selective superoxide radical generating oxidase-mimetic cerium oxide nanozyme exhibiting efficient antibacterial activity at physiological pH

Bacterial infections are considered as one of the major health threats to the global population. The advent of bacterial species with antibiotic resistance has attracted significant efforts to develop novel materials and strategies to effectively avoid the resistance with enhanced antibacterial potential. In this work, we have developed oxidase-mimetic cerium oxide nanoparticles (CeO2 NPs), which exhibit nanozyme activity at physiological pH in the presence of adenosine triphosphate (ATP). The oxidase-mimetic activity was confirmed to involve superoxide radicals using p-benzoquinone and dihydroethidium. Using indole propionic acid, ethanol, and terephthalic acid, it was confirmed that the oxidase-mimetic activity of CeO2 NPs with ATP does not involve the formation of hydroxyl radicals. CeO2 NPs with ATP produced a strong antibacterial activity against Staphylococcus aureus and Escherichia coli within 3 - 6 hrs. The bacterial cell morphology analysis suggested that superoxide radicals generated during the oxidase-mimetic activity of CeO2 NPs with ATP cause distortion of paired and tetrad arrangement (Staphylococcus aureus), loss of cytoplasmic content, damage, and pore formation in the cell wall (Escherichia coli) that led to the death of bacteria. Further, the live/dead assay also concludes the time-dependent death of bacterial cells with the highest death in the cell population exposed to CeO2 NPs and ATP. Thus, the antibacterial activity at physiological pH by superoxide radical generating oxidase-mimetic CeO2 NPs could be further extended to other pathogenic bacterial species.

Exploring the potential of metal and metal oxide nanomaterials for sustainable water and wastewater treatment: A review of their antimicrobial properties

Metallic nanoparticles (NPs) are of particular interest as antimicrobial agents in water and wastewater treatment due to their broad suppressive range against bacteria, viruses, and fungi commonly found in these environments. This review explores the potential of different types of metallic NPs, including zinc oxide, gold, copper oxide, and titanium oxide, for use as effective antimicrobial agents in water and wastewater treatment. This is due to the fact that metallic NPs possess a broad suppressive range against bacteria, viruses, as well as fungus. In addition to that, NPs are becoming an increasingly popular alternative to antibiotics for treating bacterial infections. Despite the fact that most research has been focused on silver NPs because of the antibacterial qualities that are known to be associated with them, curiosity about other metallic NPs as potential antimicrobial agents has been growing. Zinc oxide, gold, copper oxide, and titanium oxide NPs are included in this category since it has been demonstrated that these elements have antibacterial properties. Inducing oxidative stress, damage to the cellular membranes, and breakdowns throughout the protein and DNA chains are some of the ways that metallic NPs can have an influence on microbial cells. The purpose of this review was to engage in an in-depth conversation about the current state of the art regarding the utilization of the most important categories of metallic NPs that are used as antimicrobial agents. Several approaches for the synthesis of metal-based NPs were reviewed, including physical and chemical methods as well as "green synthesis" approaches, which are synthesis procedures that do not involve the employment of any chemical agents. Moreover, additional pharmacokinetics, physicochemical properties, and the toxicological hazard associated with the application of silver NPs as antimicrobial agents were discussed.

La-Doped CeO2 Quantum Dots: Novel Dye Degrader, Antibacterial Activity, and In Silico Molecular Docking Analysis

The current work demonstrates a novel synthesis of different concentrations of La-doped (2, 4, and 6 wt %) CeO₂ quantum dots (QDs) using a hydrothermal approach. This research aimed to examine the dye degradation efficiency, antibacterial activity, and in silico molecular docking analysis of La-doped CeO₂ QDs. The structure, elemental composition, optical properties, d-spacing, and morphological features of QDs were examined using various methods. XRD spectra exhibited the cubic structure of CeO₂, and the crystallinity was suppressed upon La doping. TEM revealed the formation of cubic-shaped QDs of CeO₂, and the incorporation of La decreased agglomeration. UV-vis absorption spectra showed a red shift upon La doping, assigned to a decrease in band gap energy. 6% La-doped CeO₂ showed significant antibacterial activity against Escherichia coli at higher concentrations in comparison to ciprofloxacin. La-CeO₂ was proposed as a putative inhibitor of β-lactamase _E. coli and DNA gyrase _E. coli relying on the outcomes of a molecular docking analysis that was in improved accord with in vitro bactericidal activity. Moreover, the prepared QDs exhibited a remarkable photocatalytic degradation of methylene blue in a basic medium.

Humic acid-mediated reduction in toxicity of Co3O4 NPs towards freshwater and marine microalgae in surfactant mixed medium

The ever-increasing applications of Co3O4 nanoparticles (NPs) have posed a serious concern about their discharge in the aquatic environment and ecotoxic implications. Being toxic towards aquatic species, the impact of other aquatic components such as dissolved organic matter (DOM), salinity, and surfactants are not studied sufficiently for their effect on the stability and ecotoxicity of Co3O4 NPs. The present study aims at the influence of humic acid (HA) on the toxicity of Co3O4 NPs in freshwater (C. minutissima) and marine (T. suecica) microalgae under surfactants mixed medium. The measure of % reduction in biomass and photosynthetic pigment were used as toxicity endpoints. Among various tested concentrations of HA, 25 mg/L HA was found suitable to minimize the NP's toxicity with or without the presence of surfactants. Co3O4 NPs mediated reduction in biomass of C. minutissima was significantly minimized by the cumulative effect of HA with T80 (51.68 ± 4.55%) followed by CTAB (46.23 ± 5.62%) and SDS (42.60 ± 2.46%). Similarly, HA with T80 (26.93 ± 6.38%) followed by SDS (17.02 ± 6.64%) and CTAB (13.01 ± 3.81%) were found to minimize the growth inhibitory effect of Co3O4 NPs in T. suecica. The estimation of chlorophyll - a content also indicated that microalgae treated with HA could maintain their photosynthetic ability more than control even in the co-presence of surfactants. Also, the reduced toxicity of Co3O4 NPs were attributed to an increase in hydrodynamic sizes of HA-treated Co3O4 NPs in both marine media (f/2) and freshwater media (BG11) due to increased aggregation and faster sedimentation of Co3O4 NPs.

Antiviral efficacy of cerium oxide nanoparticles

Nanomaterials are prospective candidates for the elimination of viruses due to their multimodal mechanisms of action. Here, we tested the antiviral potential of a largely unexplored nanoparticle of cerium dioxide (CeO₂). Two nano-CeO₂ with opposing surface charge, (+) and (-), were assessed for their capability to decrease the plaque forming units (PFU) of four enveloped and two non-enveloped viruses during 1-h exposure. Statistically significant antiviral activity towards enveloped coronavirus SARS-CoV-2 and influenza virus was registered already at 20 mg Ce/l. For other two enveloped viruses, transmissible gastroenteritis virus and bacteriophage φ6, antiviral activity was evidenced at 200 mg Ce/l. As expected, the sensitivity of non-enveloped viruses towards nano-CeO₂ was significantly lower. EMCV picornavirus showed no decrease in PFU until the highest tested concentration, 2000 mg Ce/l and MS2 bacteriophage showed slight non-monotonic response to high concentrations of nano-CeO₂(-). Parallel testing of antiviral activity of Ce³⁺ ions and SiO₂ nanoparticles allows to conclude that nano-CeO₂ activity was neither due to released Ce-ions nor nonspecific effects of nanoparticulates. Moreover, we evidenced higher antiviral efficacy of nano-CeO₂ compared with Ag nanoparticles. This result along with low antibacterial activity and non-existent cytotoxicity of nano-CeO₂ allow us to propose CeO₂ nanoparticles for specific antiviral applications.

Isolation and test of novel yeast strains with lignin usage capability and phenolic compound resistance

Five yeast fungi strains (i.e., two Cryptococcus albidus, one Candida guillermondii, and two Candida tropicalis) were isolated from sugarcane and tested for their use of lignin as sole carbon source and their potential to grow in the presence of phenol and phenol derivatives (i.e., pentachlorophenol and p‐nitrophenol). The full set of isolated yeasts showed ligninolytic activity, achieving at least 36% lignin degradation after 25 days. The C. albidus JS‐B1 strain had the highest ligninolytic activity, achieving 27% lignin degradation within 4 days. This increased activity was associated with the production of ligninolytic laccase enzymes. All the tested yeast fungi strains showed growth in the presence of high concentrations of phenolic compounds (i.e., 900 mg/L phenol, 200 mg/L p‐nitrophenol, 50 mg/L pentachlorophenol) and showed significant potential for lignin and lignin by‐product degradation. Each of these five strains has the potential to be used in biological treatment processes for contaminated effluents from paper pulping and bleaching or phenol and phenol‐derivative biodegradation processes for other industrial wastewater effluents.

Cerium oxide nanostructures: properties, biomedical applications and surface coatings

Cerium oxide nanoparticles have significantly improved catalytic properties and are of increasing interest in the nanoparticle research field hence the current trends in cerium oxide nanoparticles are reviewed here. Unlike previous reviews which have focused primarily on the biosynthesis of cerium oxide nanoparticles, their properties, and applications, this review will focus on the unique physical, chemical, and biological properties of cerium oxide nanoparticles, the role of oxygen vacancies or defects in the lattice structure, the ratio of oxidation states in determining their catalytic properties and applications in biosensing, drug or gene delivery, etc. have been discussed. Furthermore, the limitations of the bare form of cerium oxide nanoparticles and the advances in the field of surface coating by different ligands to overcome the issues of bare nanoparticles have been discussed. The review concludes with a discussion on the environmental aspects and toxicity of cerium oxide nanoparticles and their potential future in practical applications.

Status Quo in Data Availability and Predictive Models of Nano-Mixture Toxicity

Co-exposure of nanomaterials and chemicals can cause mixture toxicity effects to living organisms. Predictive models might help to reduce the intensive laboratory experiments required for determining the toxicity of the mixtures. Previously, concentration addition (CA), independent action (IA), and quantitative structure–activity relationship (QSAR)-based models were successfully applied to mixtures of organic chemicals. However, there were few studies concerning predictive models for toxicity of nano-mixtures before June 2020. Previous reviews provided comprehensive knowledge of computational models and mechanisms for chemical mixture toxicity. There is a gap in the reviewing of datasets and predictive models, which might cause obstacles in the toxicity assessment of nano-mixtures by using in silico approach. In this review, we collected 183 studies of nano-mixture toxicity and curated data to investigate the current data and model availability and gap and to derive research challenges to facilitate further experimental studies for data gap filling and the development of predictive models.

Antimicrobial metal-based nanoparticles: a review on their synthesis, types and antimicrobial action

The investigation of novel nanoparticles with antimicrobial activity has grown in recent years due to the increased incidence of nosocomial infections occurring during hospitalization and food poisoning derived from foodborne pathogens. Antimicrobial agents are necessary in various fields in which biological contamination occurs. For example, in food packaging they are used to control food contamination by microbes, in the medical field the microbial agents are important for reducing the risk of contamination in invasive and routine interventions, and in the textile industry, they can limit the growth of microorganisms due to sweat. The combination of nanotechnology with materials that have an intrinsic antimicrobial activity can result in the development of novel antimicrobial substances. Specifically, metal-based nanoparticles have attracted much interest due to their broad effectiveness against pathogenic microorganisms due to their high surface area and high reactivity. The aim of this review was to explore the state-of-the-art in metal-based nanoparticles, focusing on their synthesis methods, types, and their antimicrobial action. Different techniques used to synthesize metal-based nanoparticles were discussed, including chemical and physical methods and "green synthesis" methods that are free of chemical agents. Although the most studied nanoparticles with antimicrobial properties are metallic or metal-oxide nanoparticles, other types of nanoparticles, such as superparamagnetic iron-oxide nanoparticles and silica-releasing systems also exhibit antimicrobial properties. Finally, since the quantification and understanding of the antimicrobial action of metal-based nanoparticles are key topics, several methods for evaluating in vitro antimicrobial activity and the most common antimicrobial mechanisms (e.g., cell damage and changes in the expression of metabolic genes) were discussed in this review.

Fabrication of cellulose carbamate hydrogel-dressing with rarasaponin surfactant for enhancing adsorption of silver nanoparticles and antibacterial activity

Bacterial contamination on external wounds is known to be a factor that prevents wound healing and triggers tissue damage. Hydrogel-dressings with antibacterial activity is a useful medical device to avoid this contamination, wherein the antibacterial activity can be provided via incorporation of silver nanoparticles (AgNPs). Contrary to the conventional two-step preparation of an AgNPs-loaded hydrogel (AgNPs@hydrogel), this work aims to establish a new and facile synthesis method employing the adsorption principle. Once AgNO₃ adsorbed into active sites of the hydrogels, in situ reductions using NaBH₄ was employed to produce AgNPs@hydrogel. The effect of surfactant addition on the AgNO₃ loading and the antibacterial activity of the resulting hydrogel dressing was investigated. The outcome of this work indicates that the addition of rarasaponin not only can increase the loading of AgNPs on cellulose carbamate hydrogel (CCH) but also significantly enhance the antibacterial activity of the resulted hydrogel-dressing. Superior to the other studied surfactant, the loading capacity (LC) of AgNPs is found to be 10.15, 9.94, and 7.53 mg/g for CCH modified with rarasaponin, CTAB, and Tween80, respectively. These findings conclude that the addition of surfactant, especially rarasaponin, can effectively improve the loading of AgNPs onto hydrogel-dressing via adsorption and promote the antibacterial activity. Furthermore, the cytotoxic test shows that the hydrogel-dressings have good biocompatibility toward skin fibroblast cells.

Synthesis and biomedical applications of nanoceria, a redox active nanoparticle

Background

Nanoceria has recently received much attention, because of its widespread biomedical applications, including antibacterial, antioxidant and anticancer activity, drug/gene delivery systems, anti-diabetic property, and tissue engineering.

Main body

Nanoceria exhibits excellent antibacterial activity against both Gram-positive and Gram-negative bacteria via the generation of reactive oxygen species (ROS). In healthy cells, it acts as an antioxidant by scavenging ROS (at physiological pH). Thus, it protects them, while in cancer cells (under low pH environment) it acts as pro-oxidant by generating ROS and kills them. Nanoceria has also been effectively used as a carrier for targeted drug and gene delivery in vitro and in vivo models. Besides, nanoceria can also act as an antidiabetic agent and confer protection towards diabetes-associated organ pathophysiology via decreasing the ROS level in diabetic subjects. Nanoceria also possesses excellent potential in the field of tissue engineering. In this review, firstly, we have discussed the different methods used for the synthesis of nanoceria as these are very important to control the size, shape and Ce³⁺/Ce⁴⁺ ratio of the particles upon which the physical, chemical, and biological properties depend. Secondly, we have extensively reviewed the different biomedical applications of nanoceria with probable mechanisms based on the literature reports.

Conclusion

The outcome of this review will improve the understanding about the different synthetic procedures and biomedical applications of nanoceria, which should, in turn, lead to the design of novel clinical interventions associated with various health disorders.

Graphical abstract

Environmental mixtures of nanomaterials and chemicals: The Trojan-horse phenomenon and its relevance for ecotoxicity

The usage of engineered nanomaterials (NM) offers many novel products and applications with advanced features, but at the same time raises concerns with regard to potential adverse biological effects. Upon release and emission, NM may interact with chemicals in the environment, potentially leading to a co-exposure of organisms and the occurrence of mixture effects. A prominent idea is that NM may act as carriers of chemicals, facilitating and enhancing the entry of substances into cells or organisms, subsequently leading to an increased toxicity. In the literature, the term 'Trojan-horse effect' describes this hypothesis. The relevance of this mechanism for organisms is, however, unclear as yet. Here, a review has been performed to provide a more systematic picture on existing evidence. It includes 151 experimental studies investigating the exposure of various NM and chemical mixtures in ecotoxicological in vitro and in vivo model systems. The papers retrieved comprised studies investigating (i) uptake, (ii) toxicity and (iii) investigations considering both, changes in substance uptake and toxicity upon joint exposure of a chemical with an NM. A closer inspection of the studies demonstrated that the existing evidence for interference of NM-chemical mixture exposure with uptake and toxicity points into different directions compared to the original Trojan-horse hypothesis. We could discriminate at least 7 different categories to capture the evidence ranging from no changes in uptake and toxicity to an increase in uptake and toxicity upon mixture exposure. Concluding recommendations for the consideration of relevant processes are given, including a proposal for a nomenclature to describe NM-chemical mixture interactions in consistent terms.

Antimicrobial Activity of Cerium Oxide Nanoparticles on Opportunistic Microorganisms: A Systematic Review

An evaluation of studies of biologically active nanoparticles provides guidance for the synthesis of nanoparticles with the goal of developing new antibiotics/antifungals to combat microbial resistance. This review article focuses on the physicochemical properties of cerium oxide nanoparticles (CeNPs) with antimicrobial activity. Method. This systematic review followed the Guidelines for Transparent Reporting of Systematic Reviews and Meta-Analyses. Results. Studies have confirmed the antimicrobial activity of CeNPs (synthesized by different routes) using nitrate or chloride salt precursors and having sizes less than 54 nm. Conclusion. Due to the lack of standardization in studies with respect to the bacteria and CeNP concentrations assayed, comparisons between studies to determine more effective routes of synthesis are difficult. The mechanism of CeNP action likely occurs through oxidative stress of components in the cell membrane of the microorganism. During this process, a valence change occurs on the CeNP surface in which an electron is gained and Ce⁴⁺ is converted to Ce³⁺.

pH-Controlled Cerium Oxide Nanoparticle Inhibition of Both Gram-Positive and Gram-Negative Bacteria Growth

Here, the antibacterial activity of dextran-coated nanoceria was examined against Pseudomonas aeruginosa and Staphylococcus epidermidis by varying the dose, the time of treatment, and the pH of the solution. Findings suggested that dextran-coated nanoceria particles were much more effective at killing P. aeruginosa and S. epidermidis at basic pH values (pH = 9) compared to acidic pH values (pH = 6) due to a smaller size and positive surface charge at pH 9. At pH 9, different particle concentrations did cause a delay in the growth of P. aeruginosa, whereas impressively S. epidermidis did not grow at all when treated with a 500 μg/mL nanoceria concentration for 24 hours. For both bacteria, a 2 log reduction and elevated amounts of reactive oxygen species (ROS) generation per colony were observed after 6 hours of treatment with nanoceria at pH 9 compared to untreated controls. After 6 hours of incubation with nanoceria at pH 9, P. aeruginosa showed drastic morphological changes as a result of cellular stress. In summary, this study provides significant evidence for the use of nanoceria (+4) for a wide range of anti-infection applications without resorting to the use of antibiotics, for which bacteria are developing a resistance towards anyway.