Optical absorption spectroscopy and electronic properties of D-A dyes and chlorophyll derivatives for co-sensitization in DSSCs

The photophysical and photochemical processes of the experimental dyes ZS11 and ZS12 containing phenyl-cyanoacrylic acid (PCA) and ethynyl-PCA (EPCA) group were studied by DFT and TD-DFT systems to develop their applications in solar cells. First, their geometry, absorption spectra, chemical reaction parameters, electron transfer and dye activity were systematically studied. The photoelectric conversion efficiency (PCE) was predicted, and it was found that the PCE of ZS12 (9.974 %) was higher than ZS11 (7.171 %), which was consistent with the experimental trend (the PCE of ZS12 is 10.4 ± 0.3 % and the PCE of ZS11 is 9.0 ± 0.3 %). Secondly, the dye was co-sensitized with the chlorophyll derivative CHL-1c, and the co-sensitization system's interaction force, excited state characteristics, electron transfer mechanism and electron transfer rates were studied. The results show that the JSC of all co-sensitive systems (the JSC of ZS12-CHL is 22.363 mA/cm2 and the JSC of ZS11-CHL is 23.978 mA/cm2) is significantly higher than that of monomers (the JSC of ZS12 is 16.112 mA/cm2 and the JSC of ZS11 is 11.051 mA/cm2). It can be inferred that the optoelectronic performance of co-sensitizing systems is better than that of monomers. This study demonstrates that the use of dye molecules co-sensitized with chlorophyll derivatives can enhance DSSC performance from multiple perspectives, providing insights for further improvements.

High-performance non-fullerene acceptor-analogues designed from dithienothiophen [3,2-b]-pyrrolobenzothiadiazole (TPBT) donor materials

CONTEXT

Density functional theory (DFT) method was employed to investigate the electronic structure properties, excited state dynamics, charge transfer, and photovoltaic potential of benzo [1,2,5] thiadiazole fused to 3,7-dimethyl-3a,6,7,7b-tetrahydro-5H-thieno[2',3':4,5]thieno[3,2-b]pyrrole to form 3,9,12,13-tetramethyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″:4,5]pyrrolo[3.2-g]thieno[2',3':4,5]thieno[3,2-b]indole as the acceptor (A), bridge with thiophene as π-spacer to the donor moieties (D) which are 2,3-dihydrobenzo [b]thiophene-6-carboxylic acid (M4) and functionalized R, M1, M2, M3, and M5 to give a D-π-A-π-D. Here is the reverse combination for our molecules: the A-π-D-π-A type of chromophore configuration. It is also observed that tuning the dono-bridge configuration significantly increases the ease of charge transfer as the energy gap decreases in the order of 1.29 eV in M4 < 1.59 eV in M3 < 1.67 eV < 1.99 in M2 and 2.06 eV. The reorganization energy (RE) of M3 (0.0031) and M5 (0.0031) indicates an increase in the order of M3 > M5 > R > M2 > M4 > M1. The HOMO-LUMO indicates that the reactivity decreased, while the stability increased for the reference R at 0.990 eV, compared to the designed molecules M1-M5, with M1 being the least stable at 0.970 eV, while M4 exhibited the highest stability at 1.550 eV. The stability of the designed molecule decreased in the order of M4:1.550 > M3:1.257 > M5:1.197 > M2:1.010 > M1:0.970. Therefore, all results point to the electron-deficient core as an effective end-capped electron acceptor in M1-M5 compounds. As the ideal pair for successfully optimizing optoelectronic properties by reducing the HOMO-LUMO energy levels, reorganization energy, and binding energy and enhancing the absorption maximum and open-circuit voltage values in these designed molecules.

METHODS

DFT and TDDFT calculations were performed with Gaussian 16 program. The modelled compounds were optimized fully using the CAM-B3LYP, WB97XD, B3LYP, and MPW1PW91 functionals with the 6-31 G (d,p) basis set. The graphs for the density of states were plotted using the PyMOlyze software. Other molecular properties like the transition density matrix (TDM) and electron density difference maps (EDD) were rendered via the Multiwfn software.

Detection of Carbon, Sulfur, and Nitrogen Dioxide Pollutants with a 2D Ca12O12 Nanostructured Material

In recent times, nanomaterials have been applied for the detection and sensing of toxic gases in the environment owing to their large surface-to-volume ratio and efficiency. CO₂ is a toxic gas that is associated with causing global warming, while SO₂ and NO₂ are also characterized as nonbenign gases in the sense that when inhaled, they increase the rate of respiratory infections. Therefore, there is an explicit reason to develop efficient nanosensors for monitoring and sensing of these gases in the environment. Herein, we performed quantum chemical simulation on a Ca₁₂O₁₂ nanocage as an efficient nanosensor for sensing and monitoring of these gases (CO₂, SO₂, NO₂) by employing high-level density functional theory modeling at the B3LYP-GD3(BJ)/6-311+G(d,p) level of theory. The results obtained from our studies revealed that the adsorption of CO₂ and SO₂ on the Ca₁₂O₁₂ nanocage with adsorption energies of -2.01 and -5.85 eV, respectively, is chemisorption in nature, while that of NO₂ possessing an adsorption energy of -0.69 eV is related to physisorption. Moreover, frontier molecular orbital (FMO), global reactivity descriptors, and noncovalent interaction (NCI) analysis revealed that the adsorption of CO₂ and SO₂ on the Ca₁₂O₁₂ nanocage is stable adsorption, while that of NO₂ is unstable adsorption. Thus, we can infer that the Ca₁₂O₁₂ nanocage is more efficient as a nanosensor in sensing CO₂ and SO₂ gases than in sensing NO₂ gas.