Insights into diatom microalgal farming for treatment of wastewater and pretreatment of algal cells by ultrasonication for value creation

Wastewater management and its treatment have revolutionized the industry sector into many innovative techniques. However, the cost of recycling via chemical treatment has major issues especially in economically poor sectors. On the offset, one of the most viable and economical techniques to clean wastewater is by growing microalgae in it. Since wastewater is rich in nitrates, phosphates and other trace elements, the environment is suitable for the growth of microalgae. On the other side, the cost of harvesting microalgae for its secondary metabolites is burgeoning. While simultaneously growing of microalgae in photobioreactors requires regular feeding of the nutrients and maintenance which increases the cost of operation and hence cost of its end products. The growth of microalgae in waste waters makes the process not only economical but they also manufacture more amounts of value added products. However, harvesting of these values added products is still a cumbersome task. On the offset, it has been observed that pretreating the microalgal biomass with ultrasonication allows easy oozing of the secondary metabolites like oil, proteins, carbohydrates and methane at much lower cost than that required for their extraction. Among microalgae diatoms are more robust and have immense crude oil and are rich in various value added products. However, due to their thick silica walls they do not ooze the metabolites until the mechanical force on their walls reaches certain threshold energy. In this review recycling of wastewater using microalgae and its pretreatment via ultrasonication with special reference to diatoms is critically discussed. Perspectives on circular bioeconomy and knowledge gaps for employing microalgae to recycle wastewater have been comprehensively narrated.

Degradation synergism between sonolysis and photocatalysis for organic pollutants with different hydrophobicity: A perspective of mechanism and application for high mineralization efficiency

Despite extensive studies, the fundamental understanding of synergistic mechanisms between sonolysis and photocatalysis for the abatement of persistent organic pollutants (POPs) remains uncertain. As different phases formed under ultrasound irradiation, hydrophilic POPs, sulfamethoxazole (SMX, K_ow: 0.89), predominantly resides in bulk liquid and is ineffectively degraded by sonolysis (k_US = 3.33 × 10^-3 min^-1) since <10% of hydroxyl radicals (·OH) formed at the gas-liquid interface of cavitation is diffused into the bulk, whereas the other fraction rapidly recombines into hydrogen peroxide (H₂O₂). This study provides a proof-of-concept for the mechanism by presenting various analytical results, endorsing the synergistic role of photoexcited electrons in splitting sonolysis-induced H₂O₂ into ·OH, particularly in the bulk phase. In a sonophotocatalytic system, the hydrophobic POPs such as bisphenol A (BPA) and atrazine (ATZ) were mainly degraded in gas-liquid interface indicated by the low synergistic values correlation compared to SMX [i.e., SMX has a higher synergistic factor, f_syn (3.26) than BPA (1.30) and ATZ (1.35)]. Also, f_syn was found linearly correlated with the contribution factor of photocatalysis to split H₂O₂. Three times of consecutive kinetics using an effluent of municipal (MP) wastewater spiked by POPs presented >98% POPs and >96% total organic carbon (TOC) removal.

Ultrasound assisted synthesis of Mg-Mn-Zr impregnated activated carbon for effective fluoride adsorption from water

High fluoride content in the natural water sources is a serious matter of concern and adsorption is recommended as one of the most convenient, affordable and widely applied defluorination technologies. In this study, a novel composite was synthesized by impregnating magnesium (Mg), manganese (Mn) and zirconium (Zr) on powdered activated carbon (AC) for effective fluoride adsorption and the synthesis was made using sonochemical method. The characterization of the prepared adsorbent AC-Mg-Mn-Zr along with individual metal composites AC-Zr, AC-Mg and AC-Mn were done by SEM, EDX, FTIR, XRD and BET analysis to understand the major functional bonds, and changes in surface chemistry after adsorption. The mechanism of the process was discussed through major reactions involved for individual metals. Due to high point of zero charge (pH_PZC = 11.9), the adsorbent was able to remove more than 96% of fluoride consistently with only 1 g/L of optimum adsorbent dosage for a wide pH range (2 to 10). The maximum adsorption capacity obtained was 26.27 mg/g within an equilibrium time of 3 h. More than 96% energy saving was achieved in the sonochemical synthesis route compared to conventional precipitation method of synthesis.