Boron-Intercalation Engineering toward Defected 1T Phase-Rich MoBxS2-x-Supported IrOx Clusters for Acidic OER

The construction of supported Ir-based catalysts can effectively reduce the amount of Ir and generate a synergistic effect that enhances the oxygen evolution reaction (OER) activity and stability, making it one of the effective solutions for optimizing acidic OER catalysts. However, most reported metal oxide supports suffer from poor acid resistance and low electrical conductivity, which are critical for the OER process. Herein, we synthesized a nanosheet-like defected 1T phase-rich MoBxS2-x via a molten salt calcination process, during which the 1T phase was formed, and B was intercalated into MoS2 to protect the 1T phase structure during annealing procedure. After the wet refluxing process, IrOx clusters were uniformly deposited on the surface of MoBxS2-x to form IrOx@MoBxS2-x, which exhibited an overpotential of 168 mV at a current density of 10 mA cm-2 with an Ir loading amount of 25.8 wt %. By comparing the OER performance of IrOx@MoBxS2-x, IrOx@MoS2(Calcinated), and IrOx@MoS2, it is demonstrated that calcination and B intercalation of MoS2 can significantly increase acidic OER performance. This work digs into the application of 1T-MoS2 as an OER catalyst support, providing strategies for the phase and morphology control of 1T-MoS2.

Mercury remediation from wastewater through its spontaneous adsorption on non-functionalized inverse spinel magnetic ferrite nanoparticles

In this study, inverse spinel cubic ferrites MFe2O4 (M = Fe2+, and Co2+) have been fabricated for the high-capacity adsorptive removal of Hg(II) ions. The PXRD analysis confirmed ferrites with the presence of residual NaCl. The surface area of Fe3O4 (Fe-F) and CoFe2O4 (Co-F) material was 69.1 and 45.2 m2 g-1, respectively. The Co-F and Fe-F showed the maximum Hg(II) adsorption capacity of 459 and 436 mg g-1 at pH 6. The kinetic and isotherms models suggested a spontaneous adsorption process involving chemical forces over the ferrite adsorbents. The Hg(II) adsorption process, probed by X-ray photoelectron spectroscopy (XPS), confirmed the interaction of Hg(II) ions with the surface hydroxyl groups via a complexation mechanism instead of proton exchange at pH 6 with the involvement of chloride ions. Thus, this study demonstrates a viable and cost-effective solution for the efficient remediation of Hg ions from wastewater using non-functionalized ferrite adsorbents. This study also systematically investigates the kinetics and isotherm mechanism of Hg(II) adsorption onto ferrites and reports one of the highest Hg(II) adsorption capacities among other ferrite-based adsorbents.

Electrocatalysis for the Oxygen Evolution Reaction in Acidic Media: Progress and Challenges

The oxygen evolution reaction (OER) is the efficiency-determining half-reaction process of high-demand, electricity-driven water splitting due to its sluggish four-electron transfer reaction. Tremendous effects on developing OER catalysts with high activity and strong acid-tolerance at high oxidation potentials have been made for proton-conducting polymer electrolyte membrane water electrolysis (PEMWE), which is one of the most promising future hydrogen-fuel-generating technologies. This review presents recent progress in understanding OER mechanisms in PEMWE, including the adsorbate evolution mechanism (AEM) and the lattice-oxygen-mediated mechanism (LOM). We further summarize the latest strategies to improve catalytic performance, such as surface/interface modification, catalytic site coordination construction, and electronic structure regulation of catalytic centers. Finally, challenges and prospective solutions for improving OER performance are proposed.