Removal of Ni(II) from Aqueous Solution by Novel Lycopersicon esculentum Peel and Brassica botrytis Leaves Adsorbents

The current work reports adsorption of Ni(II) using Brassica botrytis leaves (BBL), Brassica botrytis leaves-activated carbon (BBL-AC), Lycopersicon esculentum peel (LEP) and Lycopersicon esculentum peel-activated carbon (LEP-AC). The adsorption of Ni(II) was tested in batch experiments by varying different parameters such as pH, initial metal ion concentration, temperature, adsorbent dosage, and contact time. Thermodynamics and kinetics investigations were performed for Ni removal. The adsorption of Ni(II) was improved by incorporation of activated carbon to the parental Brassica botrytis leaves and Lycopersicon esculentum peel adsorbents. The studies revealed 40 min of equilibrium time for Ni(II) adsorption by different adsorbents. Adsorption of Ni was drastically declined by temperature with a minimum adsorption of 53% observed for BBL. Similarly, solution pH also played a vital role in Ni(II) adsorption by different adsorbents. A 95% adsorption of Ni was recorded in the case of LEP-AC at pH 7. The study concluded with the application of Lycopersicon esculentum peel and Brassica botrytis leaves as active adsorbents for Ni(II) adsorption from aqueous solution.

Synthesis and Characterization of Functionalized Chitosan Nanoparticles with Pyrimidine Derivative for Enhancing Ion Sorption and Application for Removal of Contaminants

Modified chitosan has been widely used for heavy metals removal during the last few decades. In this research, the study was focused on the effect of modified chitosan particles after grafting with heterocyclic constituent for enhancing the sorption of Cr(VI) ions. Chitosan was functionalized by 2-thioxodihydropyrimidine-4,6(1H,5H)-dione, in which the synthesized composite considered as a nanoscale size with average 5–7 nm. This explains the fast kinetics of sorption with large surface area. The prepared sorbent was characterized by Fourier-transform infrared (FTIR), elemental analysis (EA), Brunauer–Emmett–Teller (BET surface area) theory, thermogravimetric analysis (TGA), mass spectroscopy, and scanning electron microscopy (SEM) with energy dispersive X-ray analysis (EDX) analyses. The experimental part of this work involved the application of the synthesized sorbent for the removal of Cr(VI) ions from highly contaminated tannery effluents that are characterized by a high concentration toward chromate ions with other associated toxic elements, i.e., Pb(II) and Cd (II) ions, which underscore the importance of this treatment. Under the selected conditions (K₂Cr₂O₇ salt, C_o: 100 mg L⁻¹ and pH: 4), the sorption diagram shows high Cr(VI) sorption and fast uptake kinetics. The sorption was enhanced by functionalization to 5.7 mmol Cr g⁻¹ as well as fast uptake kinetics; 30 min is sufficient for total sorption compared with 1.97 mmol Cr g⁻¹ and 60 min for the non-grafted sorbent. The Langmuir and Sips equations were fitted for the sorption isotherms, while the pseudo-first order rate equation (PFORE) was fitted for the uptake kinetics.

Robust Al3+ MOF with Selective As(V) Sorption and Efficient Luminescence Sensing Properties toward Cr(VI)

Herein, we report the synthesis and characterization of a new robust Al³⁺ metal-organic framework MOF, [Al(OH)(PATP)]·solvent (Al-MOF-1, with PATP^2- = 2-((pyridin-2-ylmethyl)amino)terephthalate). Al-MOF-1 exhibits excellent stability from highly acidic (pH = 2) to basic (pH = 12) aqueous solutions or in the presence of oxoanionic species [As(V) and Cr(VI)]. On the contrary, the related MIL-53(Al) MOF (Al(OH) (BDC), with BDC^2- = terephthalate) shows a partial structure collapse under these conditions, signifying the superior chemical robustness of Al-MOF-1. Al-MOF-1 was proved to be an effective sorbent toward As(V) with efficient sorption capacity (71.9 ± 3.8 mg As/g), rapid sorption kinetics (equilibrium time ≤1 min), and high selectivity in the presence of various competing anions. Furthermore, Al-MOF-1 revealed high sorption capacities for Cr(VI) species in both neutral (124.5 ± 8.6 mg Cr/g) and acidic (63 ± 2 mg Cr/g) aqueous media, combining fast kinetics and relatively good selectivity. The limited porosity (BET = 38 m²/g) and small pores (2-3 Å) of the material indicate that the sorption process occurs exclusively on the external surface of Al-MOF-1 particles. The driving force for the capture of oxoanions by Al-MOF-1 is the strong electrostatic interactions between the oxoanionic species and the positively charged surface of MOF particles. Aiming at a practical wastewater treatment, we have also immobilized Al-MOF-1 on a cotton substrate, coated with polydopamine. The fabric sorbent exhibited highly effective removal of the toxic oxoanionic species from aqueous media under either batch or dynamic (continuous flow) conditions. In addition, Al-MOF-1 was found to be a promising luminescence sensor for detecting trace amounts of Cr(VI) in real water samples, with Cr(VI) being successfully detected at concentrations well below the acceptable limits (<50 ppb). Moreover, Al-MOF-1 was demonstrated to be a sufficient water sensor in organic solvents (LOD ≤0.25% v/v). All the above indicate that Al-MOF-1 represents a multifunctional material with a multitude of potential applications, such as environmental remediation, industrial wastewater treatment, chemical analysis, and water determination in biofuels.