Lipid specificity of surfactant protein B studied by time-of-flight secondary ion mass spectrometry

Surfactant Proteins SP-B and SP-C in Pulmonary Surfactant Monolayers: Physical Properties Controlled by Specific Protein-Lipid Interactions

The lining of the alveoli is covered by pulmonary surfactant, a complex mixture of surface-active lipids and proteins that enables efficient gas exchange between inhaled air and the circulation. Despite decades of advancements in the study of the pulmonary surfactant, the molecular scale behavior of the surfactant and the inherent role of the number of different lipids and proteins in surfactant behavior are not fully understood. The most important proteins in this complex system are the surfactant proteins SP-B and SP-C. Given this, in this work we performed nonequilibrium all-atom molecular dynamics simulations to study the interplay of SP-B and SP-C with multicomponent lipid monolayers mimicking the pulmonary surfactant in composition. The simulations were complemented by z-scan fluorescence correlation spectroscopy and atomic force microscopy measurements. Our state-of-the-art simulation model reproduces experimental pressure-area isotherms and lateral diffusion coefficients. In agreement with previous research, the inclusion of either SP-B and SP-C increases surface pressure, and our simulations provide a molecular scale explanation for this effect: The proteins display preferential lipid interactions with phosphatidylglycerol, they reside predominantly in the lipid acyl chain region, and they partition into the liquid expanded phase or even induce it in an otherwise packed monolayer. The latter effect is also visible in our atomic force microscopy images. The research done contributes to a better understanding of the roles of specific lipids and proteins in surfactant function, thus helping to develop better synthetic products for surfactant replacement therapy used in the treatment of many fatal lung-related injuries and diseases.

Meet the IUPAB Councilor-Hans-Joachim Galla

As one of the twelve Councilors, it is my pleasure to provide a short biographical sketch for the readers of Biophys. Rev. and for the members of the Biophysical Societies. I have been a member of the council in the former election period. Moreover, I served since decades in the German Biophysical Society (DGfB) as board member, secretary, vice president, and president. I hold a diploma degree in chemistry as well as PhD from the University of Göttingen. The experimental work for both qualifications has been performed at the Max Planck Institute for Biophysical Chemistry in Göttingen under the guidance of Erich Sackmann and the late Herman Träuble. When E. Sackmann moved to the University of Ulm, I joined his group as a research assistant performing my independent research on structure and dynamics of biological and artificial membranes and qualified for the “habilitation” thesis in Biophysical Chemistry. I have spent a research year at Stanford University supported by the Deutsche Forschungsgemeinschaft (DFG) and after coming back to Germany, I was appointed as a Heisenberg Fellow by the DFG and became Professor in Biophysical Chemistry in the Chemistry Department of the University of Darmstadt. Since 1990, I spent my career at the Institute for Biochemistry of the University of Muenster as full Professor and Director of the institute. I have trained numerous undergraduate, 150 graduate, and postdoctoral students from chemistry, physics, and also pharmacy as well as biology resulting in more than 350 published papers including reviews and book articles in excellent collaboration with colleagues from different academic disciplines in our university and also internationally, e.g., as a guest professor at the Chemistry Department of the Chinese Academy of Science in Beijing.

Effect of Substrate Stiffness on Physicochemical Properties of Normal and Fibrotic Lung Fibroblasts

The presented research aims to verify whether physicochemical properties of lung fibroblasts, modified by substrate stiffness, can be used to discriminate between normal and fibrotic cells from idiopathic pulmonary fibrosis (IPF). The impact of polydimethylsiloxane (PDMS) substrate stiffness on the physicochemical properties of normal (LL24) and IPF-derived lung fibroblasts (LL97A) was examined in detail. The growth and elasticity of cells were assessed using fluorescence microscopy and atomic force microscopy working in force spectroscopy mode, respectively. The number of fibroblasts, as well as their shape and the arrangement, strongly depends on the mechanical properties of the substrate. Moreover, normal fibroblasts remain more rigid as compared to their fibrotic counterparts, which may indicate the impairments of IPF-derived fibroblasts induced by the fibrosis process. The chemical properties of normal and IPF-derived lung fibroblasts inspected using time-of-flight secondary ion mass spectrometry, and analyzed complexly with principal component analysis (PCA), show a significant difference in the distribution of cholesterol and phospholipids. Based on the observed distinctions between healthy and fibrotic cells, the mechanical properties of cells may serve as prospective diagnostic biomarkers enabling fast and reliable identification of idiopathic pulmonary fibrosis (IPF).

3D Molecular ToF-SIMS Imaging of Artificial Lipid Membranes Using a Discriminant Analysis-Based Algorithm

Artificial lipid membranes play a growing role in technical applications such as biosensors in pharmacological research and as model systems in the investigation of biological lipid films. In the standard procedure for displaying the distribution of membrane components, fluorescence microscopy, the fluorophores used can influence the distribution of the components and usually not all substances can be displayed at the same time. The discriminant analysis-based algorithm used in combination with scanning time-of-flight secondary ion mass spectrometry (ToF-SIMS) enables marker-free, quantitative, simultaneous recording of all membrane components. These data are used for reconstruction of distribution patterns. In the model system used for this survey, a tear fluid lipid layer, the distribution patterns of all lipids correlate well in calculated ToF-SIMS images and epi-fluorescence microscopic images. All epi-fluorescence microscopically viewable structures are visible when using both positive and negative secondary ions and can be reproduced with high lateral resolution in the submicrometer range despite the very low signal intensity and a very low signal-to-noise ratio. In addition, three-dimensional images can be obtained with a subnanometer depth resolution. Furthermore, structures and the distribution of substances that cannot be made visible by epi-fluorescence microscopy can be displayed. This enables new insights that cannot be gained by epi-fluorescence microscopy alone.

Distribution of Paramagnetic Fe₂O₃/SiO₂⁻Core/Shell Nanoparticles in the Rat Lung Studied by Time-of-Flight Secondary Ion Mass Spectrometry: No Indication for Rapid Lipid Adsorption

Amorphous silica nanoparticles comprise a class of widely used industrial nanomaterials, which may elicit acute inflammation in the lung. These materials have a large specific surface to which components of the pulmonary micro-milieu can bind. To conduct appropriate binding studies, paramagnetic Fe₂O₃/SiO₂ core/shell nanoparticles (Fe-Si-NP) may be used as an easy-to-isolate silica surrogate, if several prerequisites are fulfilled. To this end, we investigated the distribution of Fe, Si, protein and phosphatidylcholine (PC) by Time-of-Flight secondary ion mass spectrometry (ToF-SIMS) in cryo-sections from the rat lungs to which Fe-Si-NP had been administered for 30 min. Regions-of-interest were identified and analyzed with incident light and enhanced dark-field microscopy (DFM). Fe-Si-NP particles (primary particle size by electron microscopy: 10–20 nm; aggregate size by tracking analysis: 190 ± 20 nm) and agglomerates thereof were mainly attached to alveolar walls and only marginally internalized by cells such as alveolar macrophages. The localization of Fe-Si-NP by DFM was confirmed by ToF-SIMS signals from both, Fe and Si ions. With respect to an optimized signal-to-noise ratio, Fe⁺, Si⁺, CH₄N⁺ and the PC head group (C₅H₁₅NO₄P⁺) were the most versatile ions to detect iron, silica, protein, and PC, respectively. Largely congruent Fe⁺ and Si⁺ signals demonstrated that the silica coating of Fe-Si-NP remained stable under the conditions of the lung. PC, as a major lipid of the pulmonary surfactant, was colocalized with the protein signal alongside alveolar septa, but was not detected on Fe-Si-NP, suggesting that silica nanoparticles do not adsorb lipids of the lung surfactant under native conditions. The study shows that ToF-SIMS is a valuable technique with adequate spatial resolution to analyze nanoparticles together with organic molecules in the lung. The paramagnetic Fe-Si-NP appear well suited to study the binding of proteins to silica nanomaterials in the lung.

Electrostatically driven lipid-protein interaction: Answers from FRET

Electrostatics govern the association of a large number of proteins with cellular membranes. In some cases, these proteins present specialized lipid-binding modules or membrane targeting domains while in other cases association is achieved through nonspecific interaction of unstructured clusters of basic residues with negatively charged lipids. Given its spatial resolution in the nanometer range, Förster resonance energy transfer (FRET) is a powerful tool to give insight into protein-lipid interactions and provide molecular level information which is difficult to retrieve with other spectroscopic techniques. In this review we present and discuss the basic formalisms of both hetero- and homo-FRET pertinent to the most commonly encountered problems in lipid-protein interaction studies and highlight some examples of implementations of different FRET methodologies to characterize lipid/protein systems in which electrostatic interactions play a crucial role. This article is part of a Special Issue entitled: Lipid-protein interactions.

Modifications to surfactant protein B structure and lipid interactions under respiratory distress conditions: consequences of tryptophan oxidation

These studies detail the altered structure-function relationships caused by oxidation of surfactant protein B (SP-B), a mode of damage thought to be important in acute respiratory distress syndrome (ARDS), a common and frequently fatal condition. An 18-residue fragment comprising the N-terminal helix of SP-B was investigated in oxidized and unmodified forms by solution and solid-state nuclear magnetic resonance (NMR), circular dichroism (CD), and molecular dynamics (MD) simulation. Taken together, the results indicate that tryptophan oxidation causes substantial disruptions in helical structure and lipid interactions. The structural modifications induced by tryptophan oxidation were severe, with a reduction in helical extent from approximately three helical turns to, at most, one turn, and were observed in a variety of solvent environments, including sodium dodecyl sulfate (SDS) micelles, dodecyl phosphocholine (DPC) micelles, and a 40% hexafluoro-2-propanol (HFIP) aqueous solution. The unmodified peptide takes on an orientation within lipid bilayers that is tilted approximately 30° away from an in-plane position. Tryptophan oxidation causes significant modifications to the peptide-lipid interactions, and the peptide likely shifts to a more in-plane orientation within the lipids. Interestingly, the character of the disruptions to peptide-lipid interactions caused by tryptophan oxidation was highly dependent on the charge of the lipid headgroup.

A ToF-SIMS study of the lateral organization of lipids and proteins in pulmonary surfactant systems

Pulmonary surfactant is a complex lipid-protein mixture whose main function is to reduce the surface tension at the air-liquid interface of alveoli to minimize the work of breathing. The exact mechanism by which surfactant monolayers and multilayers are formed and how they lower surface tension to very low values during lateral compression remains uncertain. We used time-of-flight secondary ion mass spectrometry to study the lateral organization of lipids and peptide in surfactant preparations ranging in complexity. We show that we can successfully determine the location of phospholipids, cholesterol and a peptide in surfactant Langmuir-Blodgett films and we can determine the effect of cholesterol and peptide addition. A thorough understanding of the lateral organization of PS interfacial films will aid in our understanding of the role of each component as well as different lipid-lipid and lipid-protein interactions. This may further our understanding of pulmonary surfactant function.

Surface view of the lateral organization of lipids and proteins in lung surfactant model systems-a ToF-SIMS approach

The lateral organization of domain structures is an extremely significant aspect of biomembrane research. Chemical imaging by mass spectrometry with its recent advancement in sensitivity and lateral resolution has become a highly promising tool in biological research. In this review, we focus briefly on the instrumentation, working principle and important concepts related to time-of-flight secondary ion mass spectrometry followed by an overview of lipid/protein fragmentation patterns and chemical mapping. The key issues addressed are the applications of time-of-flight secondary ion mass spectrometry in biological membrane research. Additionally, we briefly review our recent investigations based on time-of-flight secondary ion mass spectrometry to unravel the lateral distribution of lipids and surfactant proteins in lung surfactant model systems as an example that highlights the importance of fluidity and ionic conditions on lipid phase behavior and lipid-protein interactions.

Nanoparticle interaction with model lung surfactant monolayers

One of the most important functions of the lung surfactant monolayer is to form the first line of defence against inhaled aerosols such as nanoparticles (NPs), which remains largely unexplored. We report here, for the first time, the interaction of polyorganosiloxane NPs (AmorSil20: 22 nm in diameter) with lipid monolayers characteristic of alveolar surfactant. To enable a better understanding, the current knowledge about an established model surface film that mimics the surface properties of the lung is reviewed and major results originating from our group are summarized. The pure lipid components dipalmitoylphosphatidylcholine and dipalmitoylphosphatidylglycerol have been used to study the biophysical behaviour of their monolayer films spread at the air-water interface in the presence of NPs. Film balance measurements combined with video-enhanced fluorescence microscopy have been used to investigate the formation of domain structures and the changes in the surface pattern induced by NPs. We are able to show that NPs are incorporated into lipid monolayers with a clear preference for defect structures at the fluid-crystalline interface leading to a considerable monolayer expansion and fluidization. NPs remain at the air-water interface probably by coating themselves with lipids in a self-assembly process, thereby exhibiting hydrophobic surface properties. We also show that the domain structure in lipid layers containing surfactant protein C, which is potentially responsible for the proper functioning of surfactant material, is considerably affected by NPs.

Calcium ions as "miscibility switch": colocalization of surfactant protein B with anionic lipids under absolute calcium free conditions

One of the main determinants of lung surfactant function is the complex interplay between its protein and lipid components. The lipid specificity of surfactant protein B (SP-B), however, and the protein's ability to selectively squeeze out lipids, has remained contradictory. In this work we present, for the first time to our knowledge, by means of time-of-flight secondary ion mass spectrometry chemical imaging, a direct evidence for colocalization of SP-B as well as its model peptide KL(4) with negatively charged dipalmitoylphosphatidylglycerol under absolute calcium free conditions. Our results prove that protein/lipid localization depends on the miscibility of all surfactant components, which itself is influenced by subphase ionic conditions. In contrast to our earlier studies reporting SP-B/KL(4) colocalization with zwitterionic dipalmitoylphosphatidylcholine, in the presence of even the smallest traces of calcium, we finally evidence an apparent reversal of protein/lipid mixing behavior upon calcium removal with ethylene diamine tetraacetic acid. In addition, scanning force microscopy measurements reveal that by depleting the subphase from calcium ions the protrusion formation ability of SP-B or KL(4) is not hampered. However, in the case of KL(4), distinct differences in protrusion morphology and height are visible. Our results support the idea that calcium ions act as a "miscibility switch" in surfactant model systems and probably are one of the major factors steering lipid/protein mixing behavior as well as influencing the protein's protrusion formation ability.

The effect of a C-terminal peptide of surfactant protein B (SP-B) on oriented lipid bilayers, characterized by solid-state 2H- and 31P-NMR

SP-B(CTERM), a cationic, helical peptide based on the essential lung surfactant protein B (SP-B), retains a significant fraction of the function of the full-length protein. Solid-state (2)H- and (31)P-NMR were used to examine the effects of SP-B(CTERM) on mechanically oriented lipid bilayer samples. SP-B(CTERM) modified the multilayer structure of bilayers composed of POPC, POPG, POPC/POPG, or bovine lipid extract surfactant (BLES), even at relatively low peptide concentrations. The (31)P spectra of BLES, which contains approximately 1% SP-B, and POPC/POPG with 1% SP-B(CTERM), look very similar, supporting a similarity in lipid interactions of SP-B(CTERM) and its parent protein, full-length SP-B. In the model systems, although the peptide interacted with both the oriented and unoriented fractions of the lipids, it interacted differently with the two fractions, as demonstrated by differences in lipid headgroup structure induced by the peptide. On the other hand, although SP-B(CTERM) induced similar disruptions in overall bilayer orientation in BLES, there was no evidence of lipid headgroup conformational changes in either the oriented or the unoriented fractions of the BLES samples. Notably, in the model lipid systems the peptide did not induce the formation of small, rapidly tumbling lipid structures, such as micelles, or of hexagonal phases, the observation of which would have provided support for functional mechanisms involving peptide-induced lipid flip-flop or stabilization of curved lipid structures, respectively.

Advances in imaging secondary ion mass spectrometry for biological samples

Imaging mass spectrometry combines the power of mass spectrometry to identify complex molecules based on mass with sample imaging. Recent advances in secondary ion mass spectrometry have improved sensitivity and spatial resolution, so that these methods have the potential to bridge between high-resolution structures obtained by X-ray crystallography and cyro-electron microscopy and ultrastructure visualized by conventional light microscopy. Following background information on the method and instrumentation, we address the key issue of sample preparation. Because mass spectrometry is performed in high vacuum, it is essential to preserve the lateral organization of the sample while removing bulk water, and this has been a major barrier for applications to biological systems. Recent applications of imaging mass spectrometry to cell biology, microbial communities, and biosynthetic pathways are summarized briefly, and studies of biological membrane organization are described in greater depth.

Pulmonary surfactant model systems catch the specific interaction of an amphiphilic peptide with anionic phospholipid

Interfacial behavior was studied in pulmonary surfactant model systems containing an amphiphilic alpha-helical peptide (Hel 13-5), which consists of 13 hydrophobic and five hydrophilic amino acid residues. Fully saturated phospholipids of dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylglycerol (DPPG) were utilized to understand specific interactions between anionic DPPG and cationic Hel 13-5 for pulmonary functions. Surface pressure (pi)-molecular area (A) and surface potential (DeltaV)-A isotherms of DPPG/Hel 13-5 and DPPC/DPPG (4:1, mol/mol)/Hel 13-5 preparations were measured to obtain basic information on the phase behavior under compression and expansion processes. The interaction leads to a variation in squeeze-out surface pressures against a mole fraction of Hel 13-5, where Hel 13-5 is eliminated from the surface on compression. The phase behavior was visualized by means of Brewster angle microscopy, fluorescence microscopy, and atomic force microscopy. At low surface pressures, the formation of differently ordered domains in size and shape is induced by electrostatic interactions. The domains independently grow upon compression to high surface pressures, especially in the DPPG/Hel 13-5 system. Under the further compression process, protrusion masses are formed in AFM images in the vicinity of squeeze-out pressures. The protrusion masses, which are attributed to the squeezed-out Hel 13-5, grow larger in lateral size with increasing DPPG content in phospholipid compositions. During subsequent expansion up to 35 mN m(-1), the protrusions retain their height and lateral diameter for the DPPG/Hel 13-5 system, whereas the protrusions become smaller for the DPPC/Hel 13-5 and DPPC/DPPG/Hel 13-5 systems due to a reentrance of the ejected Hel 13-5 into the surface. In this work we detected for the first time, to our knowledge, a remarkably large hysteresis loop for cyclic DeltaV-A isotherms of the binary DPPG/Hel 13-5 preparation. This exciting phenomenon suggests that the specific interaction triggers two completely independent processes for Hel 13-5 during repeated compression and expansion: 1), squeezing-out into the subsolution; and 2), and close packing as a monolayer with DPPG at the interface. These characteristic processes are also strongly supported by atomic force microscopy observations. The data presented here provide complementary information on the mechanism and importance of the specific interaction between the phosphatidylglycerol headgroup and the polarized moiety of native surfactant protein B for biophysical functions of pulmonary surfactants.

Mass spectral imaging of glycophospholipids, cholesterol, and glycophorin a in model cell membranes

Time of flight secondary ion mass spectrometry (ToF-SIMS) and the Langmuir-Blodgett (LB) technique have been used to create and analyze reproducible membrane mimics of the inner and outer leaflets of a cellular membrane to investigate lipid-protein and lipid-lipid interactions. Films composed of phospholipids, cholesterol and an integral membrane protein were utilized. The results show the outer membrane leaflet mimic (DPPC/cholesterol/glycophorin A LB film) consisting of a single homogeneous phase whereas the inner membrane leaflet mimic (DPPE/cholesterol/glycophorin A LB film) displays heterogeneity in the form of two separate phases. A DPPE/cholesterol phase and a glycophorin A phase. This points to differences in membrane domain formation based upon the different chemical composition of the leaflets of a cell membrane. The reliability of the measurements was enhanced by establishing the influence of the matrix effect upon the measurement and by utlilizing PCA to enhance the contrast of the images.

Structure of pulmonary surfactant membranes and films: the role of proteins and lipid-protein interactions

The pulmonary surfactant system constitutes an excellent example of how dynamic membrane polymorphism governs some biological functions through specific lipid-lipid, lipid-protein and protein-protein interactions assembled in highly differentiated cells. Lipid-protein surfactant complexes are assembled in alveolar pneumocytes in the form of tightly packed membranes, which are stored in specialized organelles called lamellar bodies (LB). Upon secretion of LBs, surfactant develops a membrane-based network that covers rapidly and efficiently the whole respiratory surface. This membrane-based surface layer is organized in a way that permits efficient gas exchange while optimizing the encounter of many different molecules and cells at the epithelial surface, in a cross-talk essential to keep the whole organism safe from potential pathogenic invaders. The present review summarizes what is known about the structure of the different forms of surfactant, with special emphasis on current models of the molecular organization of surfactant membrane components. The architecture and the behaviour shown by surfactant structures in vivo are interpreted, to some extent, from the interactions and the properties exhibited by different surfactant models as they have been studied in vitro, particularly addressing the possible role played by surfactant proteins. However, the limitations in structural complexity and biophysical performance of surfactant preparations reconstituted in vitro will be highlighted in particular, to allow for a proper evaluation of the significance of the experimental model systems used so far to study structure-function relationships in surfactant, and to define future challenges in the design and production of more efficient clinical surfactants.

Structural characterization of the monolayer-multilayer transition in a pulmonary surfactant model: IR studies of films transferred at continuously varying surface pressures

The four-component system acyl chain perdeuterated 1,2-dipalmitoylphosphatidylcholine (DPPC)/1,2-dipalmitoylphosphatidylglycerol/ (DPPG)/pulmonary surfactant protein SP-C/cholesterol provides a useful model for in vitro biophysical studies of the reversible monolayer to multilayer transition that occurs during compression <--> expansion cycles in the lung. Monolayer films of this mixture (with chain perdeuterated DPPC-d62) at the air/water interface have been transferred to solid substrates under conditions of continuously varying surface pressure, an approach termed COVASP (continuously varying surface pressures) (Langmuir 2007, 23, 4958). The thermodynamic properties of the Langmuir films have been examined with pressure-area isotherms, while the molecular properties of the film constituents in the transferred films in the monolayer and multilayer phases have been examined with IR spectroscopy. Quantitative intensity measurements of the DPPC-d62, DPPG, and SP-C components in each phase reveal that the DPPG and SP-C constituents are relatively enriched in the multilayer compared with the DPPC-d62, although all three species are present in both phases. Some molecular structure information is available from the surface-pressure-induced variation in IR parameters. The DPPC-d62 exhibits slightly increased conformational order in the multilayer phase as detected from decreases in the CD2 stretching frequencies upon compression, while the lipid phosphate residues become dehydrated, as deduced from increases in the 1245 cm-1 symmetric PO2- stretching frequency. A small increase is observed in the protein amide I frequency; possible interpretations of these changes are presented. The current observations are compared with ideas contained in the "squeeze-out hypothesis" (Handbook of Physiology, The Respiratory System; American Physiological Society Press: Bethesda, MD, 1986; Vol. III, p 247) and in the "liquid crystalline collapse" model (Biophys. J. 2003, 84, 3792). Within the limitation of the current procedures, the data contain elements from both these descriptions of the monolayer transformation. Extensions and possible limitations of the COVASP-IR method are discussed.

Solubility versus electrostatics: what determines lipid/protein interaction in lung surfactant

Mammalian lung surfactant is a complex lipid/protein mixture covering the alveolar interface and has the crucial function of reducing the surface tension at this boundary to minimal values. Surfactant protein SP-B plays an important role for this purpose and was the focus of many recent studies. However, the specificity of lipid/SP-B interactions is controversial. Since these investigations were accomplished at varying pH conditions (pH 5.5 and 7.0), we studied the specificity of these interactions in a dipalmitoylphosphatidylcholine (DPPC)/dipalmitoylphosphatidylglycerol (DPPG)/SP-B (4:1:0.2 mol %) model system at either pH. Mainly fluorescence microscopy and laterally resolved time-of-flight secondary ion mass spectrometry were used to reveal information about the phase behavior of the lipids and the molecular distribution of SP-B in the lipid mixture. DPPG forms separated condensed domains due to a strong hydrogen-bond network, from which the protein is mainly excluded. Considering the protein as an impurity of the lipid mixture leads to the principle of the zone melting process: an impurity is highly more soluble in a liquid phase than in a solid phase. The phase behavior effect of the lipids mainly outperforms the electrostatic interactions between DPPG and SP-B, leading to a more passively achieved colocalization of DPPC and SP-B.

Langmuir-Blodgett films formed by continuously varying surface pressure. Characterization by IR spectroscopy and epifluorescence microscopy

Monolayer films of phospholipids at the air-water interface have been transferred to solid substrates under conditions of continuously varying surface pressure, an approach termed COVASP. The molecular and supramolecular properties of the film constituents have been characterized with two complementary techniques. IR spectroscopy was used to monitor chain conformation as a function of transfer surface pressure. Results were compared to those from Langmuir films determined directly at the A/W interface by IR reflection-absorption spectroscopy (IRRAS). The methylene stretching frequencies for both proteated and acyl chain perdeuterated 1,2-dipalmitoylphosphatidylcholine (DPPC and DPPC-d62) in the transferred molecules indicate that the phospholipids retain at least, in part, their surface pressure-dependent chain-conformational order characteristics. The line widths of these modes are somewhat reduced, suggestive of slower rates of reorientational motion in the Langmuir-Blodgett (LB) films. Epifluorescence microscopy reveals a progressive condensation gradient, including nucleation and growth of probe-excluding condensed domains along the transfer line. DPPC condensation, observed along a single LB film, was qualitatively comparable to compression-driven condensation as observed in situ or in conventional LB films transferred at constant pressures. However, condensation along the compression isotherm in COVASP-LB films was reduced by 15-20% as compared to films equilibrated at different constant pressures, probably the result of kinetic differences in equilibration processes. As a preliminary demonstration of the utility of this new approach, the monolayer --> multilayer transition known to occur (Eur. Biophys. J. 2005, 34, 243) in a four-component model for pulmonary surfactant has been examined. IR parameters from both the lipid and the protein constituents of the film all indicate that the transition persists during the transfer process. This new approach for the study of transferred films will permit the efficient characterization of lipid-protein interactions and structural transitions occurring in pulmonary surfactant films subjected to dynamic compression.