Coarse-grained simulations of the membrane-active antimicrobial Peptide maculatin 1.1

Membrane-Active Antibiotics Affect Domains in Bacterial Membranes as the First Step of Their Activity

The need to combat antimicrobial resistance is becoming more and more pressing. Here we investigate the working mechanism of a small cationic agent, N-alkylamide 3d, by conventional and high-speed atomic force microscopy. We show that N-alkylamide 3d interacts with the membrane of Staphylococcus aureus, where it changes the organization and dynamics of lipid domains. After this initial step, supramolecular structures of the antimicrobial agent attach on top of the affected membrane gradually, covering it entirely. These results demonstrate that lateral domains in the bacterial membranes might be affected by small antimicrobial agents more often than anticipated. At the same time, we show a new dual-step activity of N-alkylamide 3d that not only destroys the lateral membrane organization but also effectively covers the whole membrane with aggregates. This final step could render the membrane inaccessible from the outside and possibly prevent signaling and waste disposal of living bacteria.

Molecular insights into nanoplastics-peptides binding and their interactions with the lipid membrane

Micro- and nanoplastics have become a significant concern, due to their ubiquitous presence in the environment. These particles can be internalized by the human body through ingestion, inhalation, or dermal contact, and then they can interact with environmental or biological molecules, such as proteins, resulting in the formation of the protein corona. However, information on the role of protein corona in the human body is still missing. Coarse-grain models of the nanoplastics and pentapeptides were created and simulated at the microscale to study the role of protein corona. Additionally, a lipid bilayer coarse-grain model was reproduced to investigate the behavior of the coronated nanoplastics in proximity of a lipid bilayer. Hydrophobic and aromatic amino acids have a high tendency to create stable bonds with all nanoplastics. Moreover, polystyrene and polypropylene establish bonds with polar and charged amino acids. When the coronated nanoplastics are close to a lipid bilayer, different behaviors can be observed. Polyethylene creates a single polymeric chain, while polypropylene tends to break down into its single chains. Polystyrene can both separate into its individual chains and remain aggregated. The protein corona plays an important role when interacting with the nanoplastics and the lipid membrane. More studies are needed to validate the results and to enhance the complexity of the systems.

Vesicle protrusion induced by antimicrobial peptides suggests common carpet mechanism for short antimicrobial peptides

Short-cationic alpha-helical antimicrobial peptides (SCHAMPs) are promising candidates to combat the growing global threat of antimicrobial resistance. They are short-sequenced, selective against bacteria, and have rapid action by destroying membranes. A full understanding of their mechanism of action will provide key information to design more potent and selective SCHAMPs. Molecular Dynamics (MD) simulations are invaluable tools that provide detailed insights into the peptide-membrane interaction at the atomic- and meso-scale level. We use atomistic and coarse-grained MD to look into the exact steps that four promising SCHAMPs-BP100, Decoralin, Neurokinin-1, and Temporin L-take when they interact with membranes. Following experimental set-ups, we explored the effects of SCHAMPs on anionic membranes and vesicles at multiple peptide concentrations. Our results showed all four peptides shared similar binding steps, initially binding to the membrane through electrostatic interactions and then flipping on their axes, dehydrating, and inserting their hydrophobic moieties into the membrane core. At higher concentrations, fully alpha-helical peptides induced membrane budding and protrusions. Our results suggest the carpet mode of action is fit for the description of SCHAMPs lysis activity and discuss the importance of large hydrophobic residues in SCHAMPs design and activity.

Plasma metabolites-based design of long-acting peptides and their anticancer evaluation

Antimicrobial peptides (AMPs) are generally small cationic amphipathic peptides, which are thought to be ideal antineoplastic agents, owing to their favorable selectivity to cancer cells and the ability to overcome drug-resistance. In this study, an anticancer AMP (Mastoparan (INLKALAALAKKIL-NH2)) was selected as the lead compound and a series of Mastoparan derivatives were designed. Preliminary studies verified that an analogue of Mastoparan, KM8 (KLLKINLKALAALAKKIL-NH2), exhibited prominent selective antitumor effects. Instead, it presents a significant defect of metabolic instability, with a half-life in plasma of only about 0.5 h. Metabolite profiling of KM8 was performed and indicated the structure ₉AL₁₀ in peptide sequence could be the fragile site for KM8. Thus, the Aib (unnatural amnio acid) was employed to substitute the ₉Ala residue in KM8, and generating a long-acting KM8 derivative, namely KM8-Aib. Further investigations revealed KM8-Aib possessed higher metabolic stability, more potent anticancer activity in vitro & in vivo, and lower toxicity. Therefore, KM8-Aib is suggested be a potential antimalignant agent that worthy of more in-depth study.

Organizations of melittin peptides after spontaneous penetration into cell membranes

The antimicrobial peptide, melittin, is a potential next-generation antibiotic because melittin can spontaneously form pores in bacterial cell membranes and cause cytoplasm leakage. However, the organizations of melittin peptides in cell membranes remain elusive, which impedes the understanding of the poration mechanism. In this work, we use coarse-grained and all-atom molecular dynamics (MD) simulations to investigate the organizations of melittin peptides during and after spontaneous penetration into DPPC/POPG lipid bilayers. We find that the peptides in lipid bilayers adopt either a transmembrane conformation or a U-shaped conformation, which are referred to as T- and U-peptides, respectively. Several U-peptides and/or T-peptides aggregate to form stable pores. We analyze a T-pore consisting of four T-peptides and a U-pore consisting of three U-peptides and one T-peptide. In both pores, peptides are organized in a manner such that polar residues face inward and hydrophobic residues face outward, which stabilizes the pores and produces water channels. Compared with the U-pore, the T-pore has lower energy, larger pore diameter, and higher permeability. However, the T-pore occurs less frequently than the U-pore in our simulations, probably because the formation of the T-pore is kinetically slower than the U-pore. The stability and permeability of both pores are confirmed by 300 ns all-atom MD simulations. The peptide organizations obtained in this work should deepen the understanding of the stability, poration mechanism, and permeability of melittin, and facilitate the optimization of melittin to enhance the antibacterial ability.

Antimicrobial Peptides: An Update on Classifications and Databases

Antimicrobial peptides (AMPs) are distributed across all kingdoms of life and are an indispensable component of host defenses. They consist of predominantly short cationic peptides with a wide variety of structures and targets. Given the ever-emerging resistance of various pathogens to existing antimicrobial therapies, AMPs have recently attracted extensive interest as potential therapeutic agents. As the discovery of new AMPs has increased, many databases specializing in AMPs have been developed to collect both fundamental and pharmacological information. In this review, we summarize the sources, structures, modes of action, and classifications of AMPs. Additionally, we examine current AMP databases, compare valuable computational tools used to predict antimicrobial activity and mechanisms of action, and highlight new machine learning approaches that can be employed to improve AMP activity to combat global antimicrobial resistance.

Molecular Dynamics Simulation of the Interaction of Two Linear Battacin Analogs with Model Gram-Positive and Gram-Negative Bacterial Cell Membranes

Antimicrobial peptides (AMPs) are a potential solution to the increasing threat of antibiotic resistance, but successful design of active but nontoxic AMPs requires understanding their mechanism of action. Molecular dynamics (MD) simulations can provide atomic-level information regarding how AMPs interact with the cell membrane. Here, we have used MD simulations to study two linear analogs of battacin, a naturally occurring cyclic, lipidated, nonribosomal AMP. Like battacin, these analogs are active against Gram-negative multidrug resistant and Gram-positive bacteria, but they are less toxic than battacin. Our simulations show that this activity depends upon a combination of positively charged and hydrophobic moieties. Favorable interactions with negatively charged membrane lipid head groups drive association with the membrane and insertion of hydrophobic residues, and the N-terminal lipid anchors the peptides to the membrane surface. Both effects are required for stable membrane binding.

The Location of the Antimicrobial Peptide Maculatin 1.1 in Model Bacterial Membranes

Maculatin 1.1 (Mac1) is an antimicrobial peptide (AMP) from the skin secretions of Australian tree frogs. In this work, the interaction of Mac1 with anionic phospholipid bilayers was investigated by NMR, circular dichroism (CD) spectroscopy, neutron reflectometry (NR) and molecular dynamics (MD). In buffer, the peptide is unstructured but in the presence of anionic (DPC/LMPG) micelles or (DMPC/DMPG/DHPC) bicelles adopts a helical structure. Addition of the soluble paramagnetic agent gadolinium (Gd-DTPA) into the Mac1-DPC/LMPG micelle solution showed that the N-terminus is more exposed to the hydrophilic Gd-DTPA than the C-terminus in micelles. ²H and ³¹P solid-state NMR showed that Mac1 had a greater effect on the anionic lipid (DMPG). A deuterium labeled Mac1 used in NR experiments indicated that the AMP spanned across anionic (PC/PG) bilayers, which was compatible with MD simulations. Simulations also showed that Mac1 orientation remained transmembrane in bilayers and wrapped on the surface of the micelles regardless of the lipid or detergent charge. Thus, the peptide orientation appears to be more susceptible to curvature than charged surface. These results support the formation of transmembrane pores by Mac1 in model bacterial membranes.

Order–disorder skewness in alpha-synuclein: a key mechanism to recognize membrane curvature

Currently, membrane curvature is understood as an active mechanism to control cells spatial organization and activity.

Transmembrane domain dimerization induces cholesterol rafts in curved lipid bilayers

Are the dimerization of transmembrane (TM) domains and the reorganization of the lipid bilayer two independent events?

A coarse-grained approach to studying the interactions of the antimicrobial peptides aurein 1.2 and maculatin 1.1 with POPG/POPE lipid mixtures

In the present work we investigated the differential interactions of the antimicrobial peptides (AMPs) aurein 1.2 and maculatin 1.1 with a bilayer composed of a mixture of the lipids 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (POPG) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE). We carried out molecular dynamics (MD) simulations using a coarse-grained approach within the MARTINI force field. The POPE/POPG mixture was used as a simple model of a bacterial (prokaryotic cell) membrane. The results were compared with our previous findings for structures of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), a representative lipid of mammalian cells. We started the simulations of the peptide-lipid system from two different initial conditions: peptides in water and peptides inside the hydrophobic core of the membrane, employing a pre-assembled lipid bilayer in both cases. Our results show similarities and differences regarding the molecular behavior of the peptides in POPE/POPG in comparison to their behavior in a POPC membrane. For instance, aurein 1.2 molecules can adopt similar pore-like structures on both POPG/POPE and POPC membranes, but the peptides are found deeper in the hydrophobic core in the former. Maculatin 1.1 molecules, in turn, achieve very similar structures in both kinds of bilayers: they have a strong tendency to form clusters and induce curvature. Therefore, the results of this study provide insight into the mechanisms of action of these two peptides in membrane leakage, which allows organisms to protect themselves against potentially harmful bacteria. Graphical Abstract Aurein pore structure (green) in a lipid bilayer composed by POPE (blue) and POPG (red) mixture. It is possible to see water beads (light blue) inside the pore.

Penetration of antimicrobial peptides in a lung surfactant model

Molecular dynamics simulations were successfully performed to understand the absorption mechanism of antimicrobial peptides LL-37, CATH-2, and SMAP-29 in a lung surfactant model. The antimicrobial peptides quickly penetrate in the lung surfactant model in dozens or hundreds nanoseconds, but they electrostatically interact with the lipid polar heads during the simulation time of 2 μs. This electrostatic interaction should be the explanation for the inactivation of the antimicrobial peptides when co-administrated with lung surfactant. As they strongly interact with the lipid polar heads of the lung surfactant, there is no positive charge available on the antimicrobial peptide to attack the negatively charged bacteria membrane. In order to avoid the interaction of peptides with the lipid polar heads, sodium cholate was used to form nanoparticles which act as an absorption enhancer of all antimicrobial peptides used in this investigation. The nanoparticles of 150 molecules of sodium cholate with one peptide were inserted on the top of the lung surfactant model. The nanoparticles penetrated into the lung surfactant model, spreading the sodium cholate molecules around the lipid polar heads. The sodium cholate molecules seem to protect the peptides from the interaction with the lipid polar heads, leaving them free to be delivered to the water phase. The penetration of peptides alone or even the peptide nanoparticles with sodium cholate do not collapse the lung surfactant model, indicating to be a promisor drug delivery system to the lung. The implications of this finding are that antimicrobial peptides may only be co-administered with an absorption enhancer such as sodium cholate into lung surfactant in order to avoid inactivation of their antimicrobial activity.

Antimicrobial action of the cationic peptide, chrysophsin-3: a coarse-grained molecular dynamics study

Antimicrobial peptides (AMPs) are small cationic proteins that are able to destabilize a lipid bilayer structure through one or more modes of action. In this study, we investigate the processes of peptide aggregation and pore formation in lipid bilayers and vesicles by the highly cationic AMP, Chrysophsin-3 (chrys-3), using coarse-grained molecular dynamics (CG-MD) simulations and potential of mean force calculations. We study long 50 μs simulations of chrys-3 at different concentrations, both at the surface of dipalmitoylphosphatidylcholine (DPPC) and palmitoyloleoylphosphatidylcholine (POPC) bilayers, and also interacting within the interior of the lipid membrane. We show that aggregation of peptides at the surface, leads to pronounced deformation of lipid bilayers, leading in turn to lipid protrusions for peptide : ligand ratios > 1 : 12. In addition, aggregation of chrys-3 peptides within the centre of a lipid bilayer leads to spontaneous formation of pores and aggregates. Both mechanisms of interaction are consistent with previously reported experimental data for chrys-3. Similar results are observed also in POPC vesicles and mixed lipid bilayers composed of the zwitterionic lipid palmitoyloleoylphosphatidylethanolamine (POPE) and the negatively charged lipid palmitoyloleoylphosphatidylglycerol (POPG). The latter are employed as models of the bacterial membrane of Escherichia coli.

Computational studies of peptide-induced membrane pore formation

A variety of peptides induce pores in biological membranes; the most common ones are naturally produced antimicrobial peptides (AMPs), which are small, usually cationic, and defend diverse organisms against biological threats. Because it is not possible to observe these pores directly on a molecular scale, the structure of AMP-induced pores and the exact sequence of steps leading to their formation remain uncertain. Hence, these questions have been investigated via molecular modelling. In this article, we review computational studies of AMP pore formation using all-atom, coarse-grained, and implicit solvent models; evaluate the results obtained and suggest future research directions to further elucidate the pore formation mechanism of AMPs.This article is part of the themed issue 'Membrane pores: from structure and assembly, to medicine and technology'.

Lipid molecules can induce an opening of membrane-facing tunnels in cytochrome P450 1A2

Cytochrome P450 1A2 (P450 1A2, CYP1A2) is a membrane-bound enzyme that oxidizes a broad range of hydrophobic substrates. The structure and dynamics of both the catalytic and trans-membrane (TM) domains of this enzyme in the membrane/water environment were investigated using a multiscale computational approach, including coarse-grained and all-atom molecular dynamics. Starting from the spontaneous self-assembly of the system containing the TM or soluble domain immersed in randomized dilauroyl phosphatidylcholine (DLPC)/water mixture into their respective membrane-bound forms, we reconstituted the membrane-bound structure of the full-length P450 1A2. This structure includes a TM helix that spans the membrane, while being connected to the catalytic domain by a short flexible loop. Furthermore, in this model, the upper part of the TM helix interacts directly with a conserved and highly hydrophobic N-terminal proline-rich segment of the catalytic domain; this segment and the FG loop are immersed in the membrane, whereas the remaining portion of the catalytic domain remains exposed to aqueous solution. The shallow membrane immersion of the catalytic domain induces a depression in the opposite intact layer of the phospholipids. This structural effect may help in stabilizing the position of the TM helix directly beneath the catalytic domain. The partial immersion of the catalytic domain also allows for the enzyme substrates to enter the active site from either aqueous solution or phospholipid environment via several solvent- and membrane-facing tunnels in the full-length P450 1A2. The calculated tunnel dynamics indicated that the opening probability of the membrane-facing tunnels is significantly enhanced when a DLPC molecule spontaneously penetrates into the membrane-facing tunnel 2d. The energetics of the lipid penetration process were assessed by the linear interaction energy (LIE) approximation, and found to be thermodynamically feasible.

Differential Interaction of Antimicrobial Peptides with Lipid Structures Studied by Coarse-Grained Molecular Dynamics Simulations

In this work; we investigated the differential interaction of amphiphilic antimicrobial peptides with 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) lipid structures by means of extensive molecular dynamics simulations. By using a coarse-grained (CG) model within the MARTINI force field; we simulated the peptide-lipid system from three different initial configurations: (a) peptides in water in the presence of a pre-equilibrated lipid bilayer; (b) peptides inside the hydrophobic core of the membrane; and (c) random configurations that allow self-assembled molecular structures. This last approach allowed us to sample the structural space of the systems and consider cooperative effects. The peptides used in our simulations are aurein 1.2 and maculatin 1.1; two well-known antimicrobial peptides from the Australian tree frogs; and molecules that present different membrane-perturbing behaviors. Our results showed differential behaviors for each type of peptide seen in a different organization that could guide a molecular interpretation of the experimental data. While both peptides are capable of forming membrane aggregates; the aurein 1.2 ones have a pore-like structure and exhibit a higher level of organization than those conformed by maculatin 1.1. Furthermore; maculatin 1.1 has a strong tendency to form clusters and induce curvature at low peptide-lipid ratios. The exploration of the possible lipid-peptide structures; as the one carried out here; could be a good tool for recognizing specific configurations that should be further studied with more sophisticated methodologies.

Charged Antimicrobial Peptides Can Translocate across Membranes without Forming Channel-like Pores

How can highly charged, cationic antimicrobial peptides (AMPs) translocate across hydrophobic lipid bilayers despite the prohibitive energetic penalty to do so? A common explanation has been the formation of peptide-lined channels. However, for most AMPs, no structures of membrane pores have been found despite clear evidence of membrane leakage and antimicrobial activity. The study here suggests an alternative and simple reason: for the AMP PGLa from Xenopus laevis (charge +5), such pores are not needed to explain both leakage and peptide translocation. Elevated-temperature multimicrosecond equilibrium simulations at all-atomistic level reveal that peptides spontaneously translocate across the membrane individually on a timescale of tens of microseconds, without forming pores. Both surface-bound peptides and lipids assist in the one-by-one translocation of the charged side chains. Single peptides can remain in a transmembrane orientation for many microseconds, snorkeling some charged residues to one interface and some to the opposite, but without inducing a water channel. Instead of stable pores, short-lived water bridges occur when two or three peptides connect at their termini, allowing both ion translocation and lipid flip-flop via a brushlike mechanism usually involving the C terminus of one peptide. The results here suggest that for some specific antimicrobial and other membrane active peptides, pore formation may not have to be invoked at all to explain peptide translocation and membrane permeabilization, which may explain why no channel structures for them have been determined experimentally.

Membrane Active Antimicrobial Peptides: Translating Mechanistic Insights to Design

Antimicrobial peptides (AMPs) are promising next generation antibiotics that hold great potential for combating bacterial resistance. AMPs can be both bacteriostatic and bactericidal, induce rapid killing and display a lower propensity to develop resistance than do conventional antibiotics. Despite significant progress in the past 30 years, no peptide antibiotic has reached the clinic yet. Poor understanding of the action mechanisms and lack of rational design principles have been the two major obstacles that have slowed progress. Technological developments are now enabling multidisciplinary approaches including molecular dynamics simulations combined with biophysics and microbiology toward providing valuable insights into the interactions of AMPs with membranes at atomic level. This has led to increasingly robust models of the mechanisms of action of AMPs and has begun to contribute meaningfully toward the discovery of new AMPs. This review discusses the detailed action mechanisms that have been put forward, with detailed atomistic insights into how the AMPs interact with bacterial membranes. The review further discusses how this knowledge is exploited toward developing design principles for novel AMPs. Finally, the current status, associated challenges, and future directions for the development of AMP therapeutics are discussed.

Interplay of G Protein-Coupled Receptors with the Membrane: Insights from Supra-Atomic Coarse Grain Molecular Dynamics Simulations

G protein-coupled receptors (GPCRs) are central to many fundamental cellular signaling pathways. They transduce signals from the outside to the inside of cells in physiological processes ranging from vision to immune response. It is extremely challenging to look at them individually using conventional experimental techniques. Recently, a pseudo atomistic molecular model has emerged as a valuable tool to access information on GPCRs, more specifically on their interactions with their environment in their native cell membrane and the consequences on their supramolecular organization. This approach uses the Martini coarse grain (CG) model to describe the receptors, lipids, and solvent in molecular dynamics (MD) simulations and in enough detail to allow conserving the chemical specificity of the different molecules. The elimination of unnecessary degrees of freedom has opened up large-scale simulations of the lipid-mediated supramolecular organization of GPCRs. Here, after introducing the Martini CGMD method, we review these studies carried out on various members of the GPCR family, including rhodopsin (visual receptor), opioid receptors, adrenergic receptors, adenosine receptors, dopamine receptor, and sphingosine 1-phosphate receptor. These studies have brought to light an interesting set of novel biophysical principles. The insights range from revealing localized and heterogeneous deformations of the membrane bilayer at the surface of the protein, specific interactions of lipid molecules with individual GPCRs, to the effect of the membrane matrix on global GPCR self-assembly. The review ends with an overview of the lessons learned from the use of the CGMD method, the biophysical-chemical findings on lipid-protein interplay.

Coarse-grained simulations of hemolytic peptide δ-lysin interacting with a POPC bilayer

δ-lysin, secreted by a Gram-positive bacterium Staphylococcus aureus, is a 26-residue membrane active peptide that shares many common features with antimicrobial peptides (AMPs). However, it possesses a few unique features that differentiate itself from typical AMPs. In particular, δ-lysin has zero net charge, even though it has many charged residues, and it preferentially lyses eukaryotic cells over bacterial cells. Here, we present the results of coarse-grained molecular dynamics simulations of δ-lysin interacting with a zwitterionic membrane over a wide range of peptide concentrations. When the peptides concentration is low, spontaneous dimerization of peptides is observed on the membrane surface, but deep insertion of peptides or pore formation was not observed. However, the calculated free energy of peptide insertion suggests that a small fraction of peptides is likely to be present inside the membrane at the peptide concentrations typically seen in dye efflux experiments. When the simulations with multiple peptides are carried out with a single pre-inserted transmembrane peptide, spontaneous pore formation occurs with a peptide-to-lipid ratio (P/L) as low as P/L=1:42. Inter-peptide salt bridges among the transmembrane peptides seem to play a role in creating compact pores with very low level of hydration. More importantly, the transmembrane peptides making up the pore are constantly pushed to the opposite side of the membrane when the mass imbalance between the two sides of membrane is significant. Thus, the pore is very dynamic, allowing multiple peptides to translocate across the membrane simultaneously.

Membrane Mediated Antimicrobial and Antitumor Activity of Cathelicidin 6: Structural Insights from Molecular Dynamics Simulation on Multi-Microsecond Scale

The cathelicidin derived bovine antimicrobial peptide BMAP27 exhibits an effective microbicidal activity and moderate cytotoxicity towards erythrocytes. Irrespective of its therapeutic and multidimensional potentiality, the structural studies are still elusive. Moreover, the mechanism of BMAP27 mediated pore formation in heterogeneous lipid membrane systems is poorly explored. Here, we studied the effect of BMAP27 in model cell-membrane systems such as zwitterionic, anionic, thymocytes-like (TLM) and leukemia-like membranes (LLM) by performing molecular dynamics (MD) simulation longer than 100 μs. All-atom MD studies revealed a stable helical conformation in the presence of anionic lipids, however, significant loss of helicity was identified in TLM and zwitterionic systems. A peptide tilt (~45˚) and central kink (at residue F10) was found in anionic and LLM models, respectively, with an average membrane penetration of < 0.5 nm. Coarse-grained (CG) MD analysis on a multi-μs scale shed light on the membrane-dependent peptide and lipid organization. Stable micelle and end-to-end like oligomers were formed in zwitterionic and TLM models, respectively. In contrast, unstable oligomer formation and monomeric BMAP27 penetration were observed in anionic and LLM systems with selective anionic lipid aggregation (in LLM). Peptide penetration up to ~1.5 nm was observed in CG-MD systems with the BMAP27 C-terminal oriented towards the bilayer core. Structural inspection suggested membrane penetration by micelle/end-to-end like peptide oligomers (carpet-model like) in the zwitterionic/TLM systems, and transmembrane-mode (toroidal-pore like) in the anionic/LLM systems, respectively. Structural insights and energetic interpretation in BMAP27 mutant highlighted the role of F10 and hydrophobic residues in mediating a membrane-specific peptide interaction. Free energy profiling showed a favorable (-4.58 kcal mol-1 for LLM) and unfavorable (+0.17 kcal mol-1 for TLM) peptide insertion in anionic and neutral systems, respectively. This determination can be exploited to regulate cell-specific BMAP27 cytotoxicity for the development of potential drugs and antibiotics.

Dynamics of Crowded Vesicles: Local and Global Responses to Membrane Composition

The bacterial cell envelope is composed of a mixture of different lipids and proteins, making it an inherently complex organelle. The interactions between integral membrane proteins and lipids are crucial for their respective spatial localization within bacterial cells. We have employed microsecond timescale coarse-grained molecular dynamics simulations of vesicles of varying sizes and with a range of protein and lipid compositions, and used novel approaches to measure both local and global system dynamics, the latter based on spherical harmonics analysis. Our results suggest that both hydrophobic mismatch, enhanced by embedded membrane proteins, and curvature based sorting, due to different modes of undulation, may drive assembly in vesicular systems. Interestingly, the modes of undulation of the vesicles were found to be altered by the specific protein and lipid composition of the vesicle. Strikingly, lipid dynamics were shown to be coupled to proteins up to 6 nm from their surface, a substantially larger distance than has previously been observed, resulting in multi-layered annular rings enriched with particular types of phospholipid. Such large protein-lipid complexes may provide a mechanism for long-range communication. Given the complexity of bacterial membranes, our results suggest that subtle changes in lipid composition may have major implications for lipid and protein sorting under a curvature-based membrane-sorting model.

Interaction of the antimicrobial peptide polymyxin B1 with both membranes of E. coli: a molecular dynamics study

Antimicrobial peptides are small, cationic proteins that can induce lysis of bacterial cells through interaction with their membranes. Different mechanisms for cell lysis have been proposed, but these models tend to neglect the role of the chemical composition of the membrane, which differs between bacterial species and can be heterogeneous even within a single cell. Moreover, the cell envelope of Gram-negative bacteria such as E. coli contains two membranes with differing compositions. To this end, we report the first molecular dynamics simulation study of the interaction of the antimicrobial peptide, polymyxin B1 with complex models of both the inner and outer membranes of E. coli. The results of >16 microseconds of simulation predict that polymyxin B1 is likely to interact with the membranes via distinct mechanisms. The lipopeptides aggregate in the lipopolysaccharide headgroup region of the outer membrane with limited tendency for insertion within the lipid A tails. In contrast, the lipopeptides readily insert into the inner membrane core, and the concomitant increased hydration may be responsible for bilayer destabilization and antimicrobial function. Given the urgent need to develop novel, potent antibiotics, the results presented here reveal key mechanistic details that may be exploited for future rational drug development.

A novel fragment based strategy for membrane active antimicrobials against MRSA

Membrane active antimicrobials are a promising new generation of antibiotics that hold the potential to avert antibiotic resistance. However, poor understanding of the action mechanism and the lack of general design principles have impeded their development. Here we extend the concept of fragment based drug design and propose a pharmacophore model based on first principles for the design of membrane active antimicrobials against Gram positive pathogens. Elaborating on a natural xanthone-based hydrophobic scaffold, two derivatives of the pharmacophore model are proposed, and these demonstrate excellent antimicrobial activity. Rigorous molecular dynamics simulations combined with biophysical experiments suggest a three-step mechanism of action (absorption-translocation-disruption) which allows us to identify key factors for the practical optimization of each fragment of the pharmacophore. Moreover, the model matches the structures of several membrane active antimicrobials which are currently in clinical trials. Our model provides a novel and rational approach for the design of bactericidal molecules that target the bacterial membrane.

The cooperative behaviour of antimicrobial peptides in model membranes

A systematic analysis of the hypothesis of the antimicrobial peptides' (AMPs) cooperative action is performed by means of full atomistic molecular dynamics simulations accompanied by circular dichroism experiments. Several AMPs from the aurein family (2.5,2.6, 3.1), have a similar sequence in the first ten amino acids, are investigated in different environments including aqueous solution, trifluoroethanol (TFE), palmitoyloleoylphosphatidylethanolamine (POPE), and palmitoyloleoylphosphatidylglycerol (POPG) lipid bilayers. It is found that the cooperative effect is stronger in aqueous solution and weaker in TFE. Moreover, in the presence of membranes, the cooperative effect plays an important role in the peptide/lipid bilayer interaction. The action of AMPs is a competition of the hydrophobic interactions between the side chains of the peptides and the hydrophobic region of lipid molecules, as well as the intra peptide interaction. The aureins 2.5-COOH and 2.6-COOH form a hydrophobic aggregate to minimize the interaction between the hydrophobic group and the water. Once that the peptides reach the water/lipid interface the hydrophobic aggregate becomes smaller and the peptides start to penetrate into the membrane. In contrast, aurein 3.1-COOH forms only a transient aggregate which disintegrates once the peptides reached the membrane, and it shows no cooperativity in membrane penetration.

LipidWrapper: an algorithm for generating large-scale membrane models of arbitrary geometry

As ever larger and more complex biological systems are modeled in silico, approximating physiological lipid bilayers with simple planar models becomes increasingly unrealistic. In order to build accurate large-scale models of subcellular environments, models of lipid membranes with carefully considered, biologically relevant curvature will be essential. In the current work, we present a multi-scale utility called LipidWrapper capable of creating curved membrane models with geometries derived from various sources, both experimental and theoretical. To demonstrate its utility, we use LipidWrapper to examine an important mechanism of influenza virulence. A copy of the program can be downloaded free of charge under the terms of the open-source FreeBSD License from http://nbcr.ucsd.edu/lipidwrapper. LipidWrapper has been tested on all major computer operating systems.

Peptide-lipid interactions: experiments and applications

The interactions between peptides and lipids are of fundamental importance in the functioning of numerous membrane-mediated cellular processes including antimicrobial peptide action, hormone-receptor interactions, drug bioavailability across the blood-brain barrier and viral fusion processes. Moreover, a major goal of modern biotechnology is obtaining new potent pharmaceutical agents whose biological action is dependent on the binding of peptides to lipid-bilayers. Several issues need to be addressed such as secondary structure, orientation, oligomerization and localization inside the membrane. At the same time, the structural effects which the peptides cause on the lipid bilayer are important for the interactions and need to be elucidated. The structural characterization of membrane active peptides in membranes is a harsh experimental challenge. It is in fact accepted that no single experimental technique can give a complete structural picture of the interaction, but rather a combination of different techniques is necessary.

Melittin creates transient pores in a lipid bilayer: results from computer simulations

To study the interaction between melittin peptides and lipid bilayer, we performed coarse-grained simulations on systems containing melittin interacting with a bilayer containing zwitterionic dipalmitoylphosphatidylcholine (DPPC) and anionic palmitoyloleoylphosphatidylglycerol (POPG) phospholipids in a 7:3 ratio. Eight different systems were considered: four at low and four at high peptide to lipid (P/L) ratios. In case of low P/L ratio we did not observe any pore creation in the bilayer. In two out of four of the simulations with the high P/L ratio, appearance of transient pores in the bilayer was observed. These pores were created due to an assembly of 3-5 melittin peptides. Not all of the peptides in the pores were in a transmembrane conformation; many of them had their termini residues anchored to the same leaflet, and these peptides assumed bent, U-shaped, conformations. We propose that when an assembly of melittin peptides creates pores, such an assembly acts as a "wedge" that splits the bilayer. To get a more detailed description of melittin on the bilayer surface and in transient pores, we performed coarse-grained to united-atom scale transformations and after that performed 50 ns molecular dynamics simulations using the united atom description of the systems. While these simulations did not show much of the change in the pore structure during the 50 ns time interval, they clearly showed the presence of water in the transient pores. The appearance of transient pores together with the translocation of peptides across the membranes is consistent with the mechanism proposed to explain graded dye leakage from large vesicles in the presence of melittin.

The simulation approach to lipid-protein interactions

The interactions between lipids and proteins are crucial for a range of biological processes, from the folding and stability of membrane proteins to signaling and metabolism facilitated by lipid-binding proteins. However, high-resolution structural details concerning functional lipid/protein interactions are scarce due to barriers in both experimental isolation of native lipid-bound complexes and subsequent biophysical characterization. The molecular dynamics (MD) simulation approach provides a means to complement available structural data, yielding dynamic, structural, and thermodynamic data for a protein embedded within a physiologically realistic, modelled lipid environment. In this chapter, we provide a guide to current methods for setting up and running simulations of membrane proteins and soluble, lipid-binding proteins, using standard atomistically detailed representations, as well as simplified, coarse-grained models. In addition, we outline recent studies that illustrate the power of the simulation approach in the context of biologically relevant lipid/protein interactions.

Multiscale molecular dynamics simulations of membrane proteins

The time and length scales accessible by biomolecular simulations continue to increase. This is in part due to improvements in algorithms and computing performance, but is also the result of the emergence of coarse-grained (CG) potentials, which complement and extend the information obtainable from fully detailed models. CG methods have already proven successful for a range of applications that benefit from the ability to rapidly simulate spontaneous self-assembly within a lipid membrane environment, including the insertion and/or oligomerization of a range of "toy models," transmembrane peptides, and single- and multi-domain proteins. While these simplified approaches sacrifice atomistic level detail, it is now straightforward to "reverse map" from CG to atomistic descriptions, providing a strategy to assemble membrane proteins within a lipid environment, prior to all-atom simulation. Moreover, recent developments have been made in "dual resolution" techniques, allowing different molecules in the system to be modeled with atomistic or CG resolution simultaneously.

Molecular simulations suggest how a branched antimicrobial peptide perturbs a bacterial membrane and enhances permeability

A covalently, branched antimicrobial peptide (BAMP) B2088 demonstrating enhanced antimicrobial effects and without additional toxicity when compared to its linear counterpart, has been developed. Atomistic molecular dynamics simulations have been used to investigate the mode of interaction of B2088 with model bacterial and mammalian membranes. These simulations suggest that both long-range electrostatic interactions and short-range hydrogen bonding play important roles in steering B2088 toward the negatively charged membranes. The reason why B2088 is selective towards the bacterial membrane is postulated to be the greater density of negative charges on the bacterial membrane which enables rapid accumulation of B2088 on the bacterial membrane to a high surface concentration, stabilizing it through excess hydrogen bond formation. The majority of hydrogen bonds are seen between the side chains of the basic residues (Arg or Lys) with the PO4 groups of lipids. In particular, formation of the bidentate hydrogen bonds between the guanidinium group of Arg and PO4 groups are found to be more favorable, both geometrically and energetically. Moreover, the planar gaunidinium group and its hydrophobic character enable the Arg side chains to solvate into the hydrophobic membrane. Structural perturbation of the bacterial membrane is found to be concentration dependent and is significant at higher concentrations of B2088, resulting in a large number of water translocations across the bacterial membrane. These simulations enhance our understanding of the action mechanism of a covalently branched antimicrobial peptide with model membranes and provide practical guidance for the design of new antimicrobial peptides.

Overview on the recent study of antimicrobial peptides: origins, functions, relative mechanisms and application

Antimicrobial peptides (AMPs), which are produced by several species including insects, other animals, micro-organisms and synthesis, are a critical component of the natural defense system. With the growing problem of pathogenic organisms resistant to conventional antibiotics, especially with the emergence of NDM-1, there is increased interest in the pharmacological application of AMPs. They can protect against a broad array of infectious agents, such as bacteria, fungi, parasite, virus and cancer cells. AMPs have a very good future in the application in pharmaceuticals industry and food additive. This review focuses on the AMPs from different origins in these recent years, and discusses their various functions and relative mechanisms of action. It will provide some detailed files for clinical research of pharmaceuticals industry and food additive in application.

Host-defense peptides of Australian anurans. Part 2. Structure, activity, mechanism of action, and evolutionary significance

A previous review summarized research prior to 2004 carried out on the bioactive host-defense peptides contained in the skin secretions of Australian anurans (frogs and toads). This review covers the extension of that research from 2004 to 2012, and includes membrane-active peptides (including antibacterial, anticancer, antifungal and antiviral peptides) together with the mechanisms by which these peptides interact with model membranes, peptides that may be classified as "neuropeptides" (including smooth muscle active peptides, opioids and immunomodulators) and peptides which inhibit the formation of nitric oxide from neuronal nitric oxide synthase. The review discusses the outcome of cDNA sequencing of signal-spacer-active peptides from an evolutionary viewpoint, and also lists those peptides for which activities have not been found to this time.

Multiscale simulations of the antimicrobial peptide maculatin 1.1: water permeation through disordered aggregates

The antimicrobial peptide maculatin 1.1 (M1.1) is an amphipathic α-helix that permeabilizes lipid bilayers. In coarse-grained molecular dynamics (CG MD) simulations, M1.1 has previously been shown to form membrane-spanning aggregates in DPPC bilayers. In this study, a simple multiscale methodology has been applied to allow sampling of important regions of the free energy surface at higher resolution. Thus, by back-converting the CG configurations to atomistic representations, it is shown that water is able to permeate through the M1.1 aggregates. Investigation of aggregate stoichiometry shows that at least six peptides are required for water permeation. The aggregates are dynamically disordered structures, and water flux occurs through irregular, fluctuating channels. The results are discussed in relation to experimental data and other simulations of antimicrobial peptides.

Fluorescence spectroscopy and molecular dynamics simulations in studies on the mechanism of membrane destabilization by antimicrobial peptides

Since their initial discovery, 30 years ago, antimicrobial peptides (AMPs) have been intensely investigated as a possible solution to the increasing problem of drug-resistant bacteria. The interaction of antimicrobial peptides with the cellular membrane of bacteria is the key step of their mechanism of action. Fluorescence spectroscopy can provide several structural details on peptide-membrane systems, such as partition free energy, aggregation state, peptide position and orientation in the bilayer, and the effects of the peptides on the membrane order. However, these "low-resolution" structural data are hardly sufficient to define the structural requirements for the pore formation process. Molecular dynamics simulations, on the other hand, provide atomic-level information on the structure and dynamics of the peptide-membrane system, but they need to be validated experimentally. In this review we summarize the information that can be obtained by both approaches, highlighting their versatility and complementarity, suggesting that their synergistic application could lead to a new level of insight into the mechanism of membrane destabilization by AMPs.

Spontaneous buckling of lipid bilayer and vesicle budding induced by antimicrobial peptide magainin 2: a coarse-grained simulation study

Molecular mechanisms of the action of antimicrobial peptides on bacterial membranes were studied by large scale coarse-grained simulations of magainin 2-dipalmitoylphosphatidylcholine/palmitoyloleoylphosphatidylglycerol (DPPC/POPG) mixed bilayer systems with spatial extents up to 0.1 μm containing up to 1600 peptides. Equilibrium simulations exhibit disordered toroidal pores stabilized by peptides. However, when a layer of peptides is placed near the lipid head groups on one side of the bilayer only, their incorporation leads to a spontaneous buckling of the bilayer. This buckling is followed by the formation of a quasi-spherical vesicular bud connected to the bilayer by a narrow neck. The mean curvature of the budding region is consistent with what is expected based on the dependence of the area per lipid on the peptide-to-lipid ratio in equilibrium simulations. Our simulations suggest that the incorporation of antimicrobial peptides on the exterior surface of a vesicle or a bacterial cell leads to buckling and vesicle budding, presumably accompanied by nucleations of giant transient pores of sizes that are much larger than indicated by equilibrium measurements and simulations.