The radiological research for pelvis asymmetry of unilateral developmental dysplasia of the hip in adult

Pelvic asymmetry in children with neuromuscular scoliosis: a computed tomography-based 3D analysis

PURPOSE

Pelvic fixation in pediatric neuromuscular patients with scoliosis is performed when significant pelvic obliquity is present. Instrumentation to the pelvis can be technically demanding and challenging, often associated with a high complication rate, prolonged operative time, increased radiation exposure, and increased intraoperative bleeding. The high complexity of the pelvic instrumentation technique, particularly in severe cases, led us to develop computed tomography (CT)-based 3D in a series of 53 consecutive neuromuscular patients. This analysis aimed to improve the understanding of pelvic asymmetry and preoperatively simulate pelvic instrumentation.

METHODS

A CT-based 3D analysis of all pelvises was performed using Mimics software (version 21), segmenting them for analysis in all three planes. We proceeded with the simulation of pelvic instrumentation with iliac screws, obtaining the angle values and corresponding orientations in the three planes for each screw. A total of 53 CT scans were analyzed, corresponding to 36 patients with myelodysplasia and 17 with neuromuscular disorders.

RESULTS

Pelvic asymmetry was observed in 88.6% (47 CT scans) of the patients. This asymmetry indicated that the weight-bearing hemipelvis underwent anatomical changes compared to the contralateral hemipelvis, including opening or closing of the pelvis relative to the sacroiliac joint, pivoting of the hemipelvis in a cephalocaudal or caudocephalic direction, and shortening of the innominate line.

CONCLUSION

The shape of the weight-bearing hemipelvis is closely related to pelvic asymmetry. A distinct pattern was identified, characterized by cephalic or caudal pivoting, greater prominence of the iliac crest, increased distance from the sciatic spine to the coccyx, and shortening of the innominate line. This finding is relevant for surgical planning and pelvic fixation.

LEVEL OF EVIDENCE

IV.

Contemplate iliosacral screw in patients with developmental dysplasia of the hip

OBJECTIVES

Our aim in the study was evaluating sacroiliac morphology in patients with DDH and its possible effect on appropriate iliosacral screw fixation.

DESIGN

Retrospective cohort study.

SETTING

Level of evidence 3.

PATIENTS/PARTICIPANTS

We evaluated the anteroposterior pelvis X-ray and pelvic CT scans of patients. We mainly divided the patients into two groups: DDH group (n:105) and control group (n:105).

INTERVENTION

The presence of the five qualitative characteristics of sacral dysplasia evaluated according to Route in both groups. The DDH group was divided into four subgroups according to the degree of hip dysplasia.

MAIN OUTCOME MEASUREMENT

The cross-sectional area, length of the osseous corridor, coronal and vertical angulation evaluated in both groups.

RESULTS

The DDH group also exhibited a significantly higher S1 coronal and axial angulation, lower S1 cross-sectional area and S1 iliosacral screw length than the control group (p:0.033, p:0,002, p:0.006, p:0,019, respectively). According to the Rout classification, 9% were normal, 31% transient, 58% dysplastic in the DDH group. 45.7% were normal, 38% transient, 17% dysplastic in the control groups. These differences between the groups were statistically significant (p < 0.001). When the DDH groups were evaluated within themselves; no statistically significant difference was observed in S1 and S2 cross-sectional area, S1 and S2 maximum estimated iliosacral screw length, S1 and S2 axial and coronal angles assessment.

CONCLUSION

Sacral dysplasia was more common, narrower and more angled osseous canal for the iliosacral screw was found in the DDH group. There was no relation between the degree of hip dysplasia and sacrum morphology in the DDH group. Thus, we suggest the surgeons be aware of iatrogenic injury even in constrained dysplastic hips.

Asymmetry of the pelvis in Polish young adults

Introduction

Symmetry is one of the criteria of correct body posture in upright position. The spatial positioning of the pelvic girdle is crucial to it. Functional and structural asymmetries within the lumbo-pelvic-hip complex can have a significant influence on the structure and functions of many human body organs and systems. The aim of the study was to present the results of inclinometer measurements of selected landmarks of the pelvic girdle in young adults aged 19-29.

Methods

The analysis of occurrence of spatial pelvic asymmetry was based on the authors' original, clinical classification and the significance of the body mass and height for the analyzed asymmetries. The inclinometer measurements of the selected landmarks of the pelvic girdle were performed in a sample consisting of 300 young individuals. Then, the occurrences of the spatial asymmetry of the pelvis were analyzed based on the authors' own clinical classification using alignment symmetry of the iliac crests, the anterior superior iliac spines and the trochanters major as a criterion. All study subjects with asymmetry <1 degree were treated as those with a symmetrical pelvis.

Results

The significance of gender, body mass and height for the analyzed asymmetries was assessed. Symmetric positioning of the iliac crests was observed in only 32% of the respondents. The iliac crest depression on the left side was more frequently observed - in 41% of the respondents. This occurred more often in women (44%) than in men (38%). In the group of women, the rotated pelvis was the most often observed (39.4%) asymmetry, while for men, it was the oblique pelvis (40%). More detailed analysis by pelvic asymmetry subtypes showed their statistical differentiation between women and men (p    <     0.0001). Analysis of moderate rotation of the pelvis for men, were reported slightly higher values but these differences were not statistically significant (p = 0.253). Women, in turn, showed slightly higher mean values but here too, the differences were not statistically significant (p = 0.245).

Discussion

Asymmetries in the pelvis area are common; they were observed in less than three-quarters of the examined population. Oblique pelvis was found in less than a quarter of women and in more than one-third men with the predominant structural asymmetries. Rotated pelvis was observed in more than one-third of women and men with dominating functional asymmetries. There were no linear correlations between the body mass and height, and the angle of asymmetries.

The Variation of the Pelvis in Unilateral Crowe Type IV Developmental Dysplasia of the Hip

OBJECTIVE

To investigate variation of the pelvis in unilateral Crowe type IV developmental dysplasia of the hip (DDH) and analyze the reliability of pelvic landmarks.

METHODS

We retrospectively received preoperative anteroposterior pelvic radiographs for 89 adult patients with unilateral Crowe type IV DDH at our institution between September 2008 and May 2019. Forty-eight patients without a false acetabulum was type IVA and 41 with a false acetabulum was type IVB. The heights of the ilium, acetabulum, and ischium areas in affected and unaffected sides were measured. The ratios of the three areas in entire pelvis are calculated. The discrepancies of bilateral iliac crest, inferior sacroiliac articulation, teardrop, and ischial tuberosity on the bisector of the pelvis were also measured.

RESULTS

The mean heights of the ilium, acetabulum, ischium areas in the affected side were 74.4, 88.6, and 37.0 mm, respectively, in type IVA group and 77.7, 83.5, and 37.8 mm, respectively, in type IVB group. The heights in the unaffected side were 82.1, 84.6, and 43.8 mm, respectively, in type IVA group and 84.6, 82.0, and 44.0 mm, respectively, in type IVB group. The ratios of the ilium, acetabulum, ischium areas in affected side of Crowe type IVA group were 0.37, 0.44, and 0.19, respectively, and the ratios in unaffected side were 0.39, 0.40, and 0.21, respectively. The ratios in affected side of Crowe type IVB group were 0.39, 0.42, and 0.19, respectively, and the ratios in unaffected side were 0.40, 0.39, and 0.21, respectively. The discrepancies of bilateral iliac crest, inferior sacroiliac articulation, teardrop, and ischial tuberosity on the line of the bisector of the pelvis in Crowe type IVA group were 5.6, 5.2, 2.0, and 7.1 mm, respectively. Those in Crowe type IVB group were 8.1, 3.5, 3.5, and 4.9 mm, respectively.

CONCLUSIONS

Pelvic asymmetry was a common occurrence in unilateral Crowe type IV DDH in adults. Furthermore, it should be reliable to use teardrop as pelvic landmark to balance leg length discrepancy in preoperative planning.

Bestimmung einer Beckenasymmetrie – Sinn oder Unsinn

Pathologien des tiefen Rückens, der Becken- sowie Knie- und Hüftgelenke werden immer wieder mit einer Messung der Beinlänge und Feststellung einer Beckenasymmetrie in Verbindung gebracht. Aufgrund dieser Messungen werden therapeutische Wege eingeschlagen. Zu diesem Thema wurden auf der Basis einer systematischen Literatursuche in zwei maßgeblichen Datenbanken 28 Artikel ermittelt. Die inhaltliche Analyse beschäftigt sich v. a. mit der Variationsanatomie des Beckens sowie der Reliabilität palpatorischer und apparativer Bestimmungen von knöchernen Referenzpunkten am Becken. Hieraus ergeben sich maßgebliche Erkenntnisse: Eine Variationsanatomie des Beckens ist häufig und kommt auch bei nichtsymptomatischen Personen vor. Die palpatorische und apparative Bestimmungen der knöchernen Referenzpunkte sind gering bis moderat reliabel. Der Rückschluss von einer festgestellten Beckenasymmetrie auf den Einfluss bestehender oder noch zu erwartender Rücken‑, Hüft- oder Beckengelenkbeschwerden ist nach derzeitiger Studienlage zumindest umstritten und daher nicht empfehlenswert.

Asymmetry of the pelvic ring evaluated by CT-based 3D statistical modeling

The human pelvis is a complex anatomical structure that consists of the innominate bones, sacrum and coccyx to form the pelvic ring. Even though considered to be a symmetric entity, asymmetry of the pelvic ring (APR) might occur to alter its anatomy, function, or biomechanics or to impact assessment and treatment of clinical cases. APR and its assessment is complicated by the intricate anatomy of the pelvic ring. There is only limited information and understanding about APR with no established evaluation methods existing. The objective of the present study was to adopt CT-based 3D statistical modeling and analysis to assess APR within the complex anatomy of the pelvic ring. We were interested to establish a better understanding of APR with knowledge and applications transferred to human anatomy, related research, and development subjects and to clinical settings. A series of 150 routine, clinical, pelvic CT protocols of European and Asian males and females (64 ± 15 (20-90) years old) were post-processed to compute gender- and ancestry-specific 3D statistical models of the pelvic ring. Evaluations comprised principal component analysis (PCA) that included size, shape, and asymmetry patterns and their variations to be assessed. Four different CT-based 3D statistical models of the entire pelvic ring were computed according to the gender and ancestry specific groups. PCA mainly displayed size and shape variations. Examination of additional PCA modes permitted six distinct asymmetry patterns to be identified. They were located at the sacrum, iliac crest, pelvic brim, pubic symphysis, inferior pubic ramus, and near to the acetabulum. Accordingly, the pelvic ring demonstrated not to be entirely symmetric. Assessment of its asymmetry proved to be a challenging task. Using CT-based 3D statistical modeling and PCA, we identified six distinct APRs that were located at different anatomical regions. These regions are more prone to APRs than other sites. Minor asymmetry patterns have to be distinguished from the distinct APRs. Side differences with regard to size, shape, and/or position require to be taken into account. APRs may be due different load mechanisms applied via spine or lower extremity or locally. There is a need for simpler and efficient, yet reliable methods to be routinely transferred to human anatomy, related research, and development subjects and to clinical settings.

Computer-Aided System Application Value for Assessing Hip Development

Purpose

A computer-aided system was used to semiautomatically measure Tönnis angle, Sharp angle, and center-edge (CE) angle using contours of the hip bones to establish an auxiliary measurement model for developmental screening or diagnosis of hip joint disorders.

Methods

We retrospectively analyzed bilateral hip x-rays for 124 patients (41 men and 83 women aged 20-70 years) who presented at the Affiliated Zhongshan Hospital of Dalian University in 2017 and 2018. All images were imported into a computer-aided detection system. After manually outlining hip bone contours, Tönnis angle, Sharp angle, and CE angle marker lines were automatically extracted, and the angles were measured and recorded. An imaging physician also manually measured all angles and recorded hip development, and Pearson correlation coefficients were used to compare computer-aided system measurements with imaging physician measurements. Accuracy for different angles was calculated, and the area under the receiver operating characteristic (AUROC) curve was used to represent the diagnostic efficiency of the computer-aided system.

Results

For Tönnis angle, Sharp angle, and CE angle, correlation coefficients were 0.902, 0.887, and 0.902, respectively; the accuracies of the computer-aided detection system were 89.1, 93.1, and 82.3%; and the AUROC curve values were 0.940, 0.956, and 0.948.

Conclusion

The measurements of Tönnis angle, Sharp angle, and CE angle using the semiautomatic system were highly correlated with the measurements of the imaging physician and can be used to assess hip joint development with high accuracy and diagnostic efficiency.

An Analysis of the Potential Relationship between Crowe Type and Lower Extremity Morphology in Patients with Developmental Dysplasia of the Hip

Purpose

To test whether Crowe type is related to femoral alignment and leg length discrepancy by evaluating the preoperative lengths and coronal alignment of femurs, pelvic parameters and hip morphology of patients who underwent primary hip arthroplasty due to coxarthrosis secondary to developmental dysplasia of the hip (DDH).

Materials and Methods

Medical records of patients with coxarthrosis secondary to DDH who were treated with total hip arthroplasty at Department of Orthopaedics and Traumatology, Istanbul University Faculty of Medicine between 2008 and 2017 were reviewed. The mechanical axis of lower limbs was analyzed; pelvic height and femoral and tibial lengths were measured. All femurs were classified according to the Dorr classification.

Results

A total of 97 patients were eligible for analysis and were diagnosed with unilateral DDH (n=51) or bilateral DDH (n=46). In those diagnosed with unilateral DDH, the affected pelvis, femur, and tibia were often shorter than the unaffected side. In those diagnosed with bilateral DDH, femoral and pelvic lengths were unpredictable. In the femoral coronal alignment test, data varied widely but were within normal limits. The difference in the Dorr types of femurs was significant between dysplastic and normal sides of patients with unilateral DDH (P=0.001) but not those with bilateral DDH.

Conclusion

Especially in patients with unilateral DDH, pelvic heights and femoral and tibial lengths on the affected side may be shorter compared with unaffected side regardless of the Crowe type. Femoral coronal alignment is unpredictable for both groups. Careful preoperative analyses of femoral coronal alignment and pelvic length are advised.

Total hip arthroplasty in an adult patient with pelvic dysmorphism, unilateral sacroiliac joint autofusion, and developmental hip dysplasia

This case describes the challenges associated with total hip arthroplasty in a patient with unique anatomy, including developmental dysplasia of the hip, pelvic dysmorphism, and unilateral sacroiliac joint autofusion. A 30-year-old female, with a history of developmental dysplasia of the hip treated with presumed pelvic osteotomy complicated by postoperative infection, presented with hip pain refractory to conservative management. Radiographic studies demonstrated a 10-cm leg length discrepancy, 20° of acetabular retroversion, severe hemipelvic dysmorphism, ipsilateral sacroiliac joint autofusion, and significant femoral head dysplasia. Total hip arthroplasty was performed using a revision acetabular component and modular femoral component, resulting in improvement in the postoperative leg length discrepancy. There were no neurovascular or other perioperative complications, and the patient was ambulating without pain or assistive devices at 1-year follow-up.

Musculoskeletal ultrasound: a useful tool for diagnosis of hip developmental dysplasia: One single-center experience

Developmental dysplasia of the hip (DDH) is one of the most common congenital abnormalities of the musculoskeletal apparatus in newborns. The aim of this study was to analyze the contribution of ultrasonography in the detection of DDH in newborns and infants, identifying the regional incidence of this pathology in the central area of Romania, emphasizing the risk factors that underlie DDH etiopathogenicity.This article represents a retrospective study of 847 newborns and infants examined in the Imagistic Department of a medical center from the central area of Romania, between January 1 and December 31, 2016. The ultrasound examinations were performed for the bilateral coxofemoral joints, using the method and technique described by Graf. For subjects born in the same medical center, data regarding mother's age, birth weights, and type of delivery (natural vs. caesarian section) were statistically analyzed.In our study group, the frequency of ultrasound diagnosis obtained from the examinations of right and left hips showed that the most frequent stage was type IA, and the rarest stage was III. The IA stage of right coxofemoral joints (87.3%) was higher than in the left coxofemoral joints (87.2%). The incidence of hip dysplasia (type III) diagnosed with ultrasound examinations in subjects from the central area of Romania was 0.2% (0.1% in both hips and 0.1% for the left coxofemoral joint).The musculoskeletal ultrasound examination is effective in early detection of hip dysplasia. The implementation of national and regional programs that promote indications, risk factors, and the screening age for DDH in both rural and urban areas could be a step forward in the early diagnosis of hip dysplasia for newborns and infants. The low incidence of DDH from our study group is not able to identify the role of advanced age of the mother, high birth weight of the newborn, or caesarean section as risk factors involved in the etiology of hip dysplasia. The implementation of national and regional programs that promote the musculoskeletal ultrasound as a screening imagistic investigation for DDH, in both rural and urban areas, could be a step forward in the early diagnosis of hip dysplasia for newborns and infants.

[A study of total hip arthroplasty with subtrochanteric osteotomy in Crowe type developmental dysplasia of hip]

Objective

To evaluate the effectiveness of total hip arthroplasty (THA) combined with subtrochanteric osteotomy in the treatment of Crowe type Ⅳdevelopmental dysplasia of the hip (DDH).

Methods

Between April 2008 and June 2016, 71 patients with unilateral Crowe type Ⅳ DDH were treated with THA. Of 71 cases, 44 were performed with subtrochanteric osteotomy (osteotomy group) and 27 were performed without subtrochanteric osteotomy (non-osteotomy group). There was no significant difference in gender, age, body mass, height, body mass index, affected side, and preoperative Harris score between 2 groups ( P>0.05). The complications were recorded and the effectiveness was assessed by Harris score. Besides, the femoral dislocation height and the settling depth of sleeve were measured in the pelvic anteroposterior X-ray film pre- and post-operatively.

Results

Osteotomy group was followed up 12-90 months (mean. 34.77 months), and non-osteotomy group was followed up 12-79 months (mean, 34.33 months). There was no significant difference in follow-up time between 2 groups ( t=-0.088, P=0.930). There was 11 cases of intraoperative or postoperative complications in osteotomy group, and 3 cases of postoperative complications in non-osteotomy group. Among the osteotomy group, 1 case had nonunion due to infection and received revision after 20 months. No loosening or dislocation of the implant occurred in both 2 groups. Significant differences were found in femoral dislocation height and settling depth of sleeve between 2 groups ( t=-8.452, P=0.000; t=6.783, P=0.000). Moreover，the osteotomy length was not correlated with the settling depth of sleeve ( r=-0.038, P=0.806). At last follow-up, there was no significant difference in Harris score between 2 groups ( t=-1.160, P=0.254).

Conclusion

THA combined with subtrochanteric osteotomy can provide a favorable outcome for treating Crowe type Ⅳ DDH. Furthermore, patients with higher femoral dislocation and severely narrow femoral proximal canals are prone to be peformed with subtrochanteric osteotomy.