One-Stage Approach to Rehabilitate a Hopeless Tooth in the Maxilla by Means of Immediate Dentoalveolar Restoration: Surgical and Prosthetic Considerations

Contemporary dentistry has increased the demand for predictable functional and esthetic results in a short period of time without compromising the long-term success of rehabilitation. Recent advances in surgical techniques have provided alternatives that allow the prosthetic rehabilitation of complex implant-supported cases through minimally invasive techniques. In this context, immediate dentoalveolar restoration (IDR) was described aiming at restoring function and esthetics through the reconstruction of lost periodontal tissues followed by immediate implant placement in order to minimize treatment time and surgical morbidity in a one-stage approach. Therefore, the aim of this clinical case is to describe the reconstruction and rehabilitation of a hopeless tooth in the maxillary region in a one-stage approach by means of IDR. The proposed steps to rehabilitate the case involved atraumatic dental extraction, immediate implant placement, and hard tissue augmentation by means of cortical-medullary bone graft harvested from the maxillary tuberosity. Afterwards, a provisional restoration was manufactured and installed to the implant allowing immediate prosthesis provisionalization and function in the same operatory time. Six months after the surgical procedure, the final prosthesis was manufactured and installed. The follow-up of nine years demonstrated the preservation of hard and soft tissue without tissue alteration and a successful esthetic outcome. The surgical protocol used allowed the ideal three-dimensional placement of the implant with the restoration of the bone buccal wall, favoring the esthetic and functional outcome of the case with harmony between white and pink esthetics. In conclusion, the employed treatment validated immediate implant-supported restoration of the missing tooth with high predictability. Furthermore, this protocol resulted in fewer surgical interventions, regeneration, and preservation of peri-implant tissues reaching the patient's expectations.

A Prosthetic and Surgical Approach for Full-Arch Rehabilitation in Atrophic Maxilla Previously Affected by Peri-Implantitis

Rehabilitation of atrophic maxilla with dental implants is still a challenge in clinical practice especially in cases of alveolar bone resorption due to peri-implantitis and pneumatization of the maxillary sinuses. Several surgical approaches have been employed to reconstruct the lost tissues allowing the proper tridimensional position of the implants. In this context, the aim of this case report is to describe a surgical and prosthetic approach to fully rehabilitate the atrophic maxilla with dental implants. The patient presented with unsatisfactory functional and esthetical implant-supported prosthesis with some of the implants already lost by peri-implantitis. The remaining three implants were also affected by peri-implantitis. Reversal prosthetic planning was performed, and a provisional prosthesis was fabricated and anchored in two short implants. Sinus floor augmentation procedure and onlay bone graft were then accomplished. After a healing period of 8 months, digital-guided surgery approach was performed to place the implants. Finally, a definitive prosthesis was installed. One-year follow-up has revealed stabilization of the bone tissue level, successful osseointegration, and a pleasant esthetic and functional result. A proper diagnosis and careful planning play an important role to enhance precision and to achieve patient esthetic and functional outcomes.

A randomized clinical trial evaluating maxillary sinus augmentation with different particle sizes of demineralized bovine bone mineral: histological and immunohistochemical analysis

This study was performed to investigate sinus floor augmentation with two different particle sizes of demineralized bovine bone mineral (DBBM) by means of histological and immunohistochemical (IHC) analysis. A randomized clinical trial was conducted involving 10 individuals requiring two-stage bilateral maxillary sinus augmentation for implant installation. The patients were randomly divided into two groups following a split-mouth design: the maxillary sinus on one side was filled with small-sized particles (0.25-1mm) and on the contralateral side with large-sized particles (1-2mm). After a healing period of 8 months, 25 implants were placed. During implant site preparation, bone biopsies were obtained from each sinus, perpendicular to the long axis of the implant (buccal-palatal direction), for descriptive and histomorphometric analyses. IHC staining for protein expression of osteocalcin (OCN), vascular endothelial growth factor (VEGF), and tartrate-resistant acid phosphatase (TRAP) was also performed. Histomorphometric analysis revealed no statistically significant difference in the percentage of biomaterial (32.4±8.56% and 38.0±6.92%), newly formed bone (36.1±9.60% and 36.7±5.79%), or connective tissue (30.4±8.63% and 23.8±6.16%) between the small- and large-sized particle groups, respectively. IHC analysis did not reveal differences in the expression of OCN, VEGF, or TRAP. These findings suggest that both particle sizes of DBBM are effective for bone augmentation in the maxillary sinus.

Early Placement of Dental Implants in Maxillary Sinus Grafted With Leukocyte and Platelet-Rich Fibrin and Deproteinized Bovine Bone Mineral

This case report aimed to describe the effects of leukocyte and platelet-rich fibrin (L-PRF) associated with demineralized bovine bone mineral (DBBM) and absorbable collagen membrane (CM) on bone regeneration in maxillary sinus augmentation. A 59-year-old male patient was referred to the Department of Periodontology for implant rehabilitation of his edentulous upper jaw. The treatment plan involved maxillary sinus augmentation followed by implant installations. A split-mouth design was employed in which the right maxillary sinus was filled using L-PRF, DBBM, and CM; the left side was filled with DBBM and CM. After 4 and 8 months postoperatively, 2 dental implants were installed in each of the right and left maxillary sinuses. Cone-beam computerized tomography (CBCT) was taken before and after sinus augmentation for evaluation of tridimensional bone volume alterations. Bone biopsies were harvested from the implant sites for histomorphometric evaluation. Resonance frequency analysis was employed immediately after implant placement and before prosthetic rehabilitation for evaluation of implant stability. Implants were loaded 10 months after sinus augmentation. CBCT analysis showed a higher resorption rate in the right side of the maxillary sinus (L-PRF + DBBM) compared to the left side (22.25% and 8.95%, respectively). Implant stability quotients were above 68 in all time-points for both groups. Histomorphometric analysis showed a high amount of newly formed bone when L-PRF was used compared with DBBM alone (2 118 102 and 975 535 mm³, respectively). Taken together, both techniques were effective for maxillary sinus augmentation, however the addition of L-PRF to the graft allowed early implant placement and accelerated bone healing in the conditions studied.

Evaluation of bone substitutes for treatment of peri-implant bone defects: biomechanical, histological, and immunohistochemical analyses in the rabbit tibia

Purpose

We sought to evaluate the effectiveness of bone substitutes in circumferential peri-implant defects created in the rabbit tibia.

Methods

Thirty rabbits received 45 implants in their left and right tibia. A circumferential bone defect (6.1 mm in diameter/4 mm depth) was created in each rabbit tibia using a trephine bur. A dental implant (4.1 mm × 8.5 mm) was installed after the creation of the defect, providing a 2-mm gap. The bone defect gaps between the implant and the bone were randomly filled according to the following groups: blood clot (CO), particulate Bio-Oss^® (BI), and Bio-Oss^® Collagen (BC). Ten animals were euthanized after periods of 15, 30, and 60 days. Biomechanical analysis by means of the removal torque of the implants, as well as histologic and immunohistochemical analyses for protein expression of osteocalcin (OC), Runx2, OPG, RANKL, and TRAP were evaluated.

Results

For biomechanics, BC showed a better biological response (61.00±15.28 Ncm) than CO (31.60±14.38 Ncm) at 30 days. Immunohistochemical analysis showed significantly different OC expression in CO and BC at 15 days, and also between the CO and BI groups, and between the CO and BC groups at 60 days. After 15 days, Runx2 expression was significantly different in the BI group compared to the CO and BC groups. RANKL expression was significantly different in the BI and CO groups and between the BI and BC groups at 15 days, and also between the BI and CO groups at 60 days. OPG expression was significantly higher at 60 days postoperatively in the BI group than the CO group.

Conclusions

Collectively, our data indicate that, compared to CO and BI, BC offered better bone healing, which was characterized by greater RUNX2, OC, and OPG immunolabeling, and required greater reversal torque for implant removal. Indeed, along with BI, BC presents promising biomechanical and biological properties supporting its possible use in osteoconductive grafts for filling peri-implant gaps.

Facial and occlusal esthetic improvements of an adult skeletal Class III malocclusion using surgical, orthodontic, and implant treatment

The aim of this clinical report is to describe the complex treatment of an adult Class III malocclusion patient who was disappointed with the outcome of a previous oral rehabilitation. Interdisciplinary treatment planning was performed with a primary indication for implant removal because of marginal bone loss and gingival recession, followed by orthodontic and surgical procedures to correct the esthetics and skeletal malocclusion. The comprehensive treatment approach included: (1) implant removal in the area of the central incisors; (2) combined orthodontic decompensation with mesial displacement and forced extrusion of the lateral incisors; (3) extraction of the lateral incisors and placement of new implants corresponding to the central incisors, which received provisional crowns; (4) orthognathic surgery for maxillary advancement to improve occlusal and facial relationships; and finally, (5) orthodontic refinement followed by definitive prosthetic rehabilitation of the maxillary central incisors and reshaping of the adjacent teeth. At the three-year follow-up, clinical and radiographic examinations showed successful replacement of the central incisors and improved skeletal and esthetic appearances. Moreover, a Class II molar relationship was obtained with an ideal overbite, overjet, and intercuspation. In conclusion, we report the successful esthetic anterior rehabilitation of a complex case in which interdisciplinary treatment planning improved facial harmony, provided gingival architecture with sufficient width and thickness, and improved smile esthetics, resulting in enhanced patient comfort and satisfaction. This clinical case report might be useful to improve facial esthetics and occlusion in patients with dentoalveolar and skeletal defects.

Correction of Malpositioned Implants through Periodontal Surgery and Prosthetic Rehabilitation Using Angled Abutment

When dental implants are malpositioned in relation to the adjacent teeth and alveolar bone or in an excessive buccal or lingual position, the final prosthesis rehabilitation impairs the peri-implant health of the gingival tissues and the aesthetics of the patient. Thus, the purpose of this case was to report and discuss a multidisciplinary protocol for the treatment of a compromised maxillary tooth in a patient with an abscess in his right central incisor due to an excessive buccal implant position. The patient presented with an implant-supported provisional restoration on his right maxillary central incisor and a traumatic injury in his left central incisor. The treatment protocol consisted in (i) abutment substitution to compensate the incorrect angulation of the implant, (ii) clinical crown lengthening, (iii) atraumatic extraction of the left central incisor, and (iv) immediate implant placement. Finally, (v) a custom abutment was fabricated to obtain a harmonious gingival contour around the prosthetic crown. In conclusion, when implants are incorrectly positioned in relation to the adjacent teeth, associated with soft-tissue defects, the challenge to create a harmonious mucogingival contours may be achieved with an interdisciplinary approach and with the placement of an appropriate custom abutment.

Aesthetic rehabilitation of a complicated crown-root fracture of the maxillary incisor: combination of orthodontic and implant treatment

The aim of this paper is to present a complex rehabilitation, of fractured tooth, with implants in anterior region considering the orthodontics extrusion to clinical success. At 7 years old, the patient fractured the maxillary left central incisor and the dentist did a crown with the fragment. Twenty years later, the patient was referred to a dental clinic for orthodontic treatment, with the chief complaint related to an accentuated deep bite, and a professional started an orthodontic treatment. After sixteen months of orthodontic treatment, tooth 21 fractured. The treatment plan included an orthodontic extrusion of tooth 21 and implant placement. This case has been followed up and the clinical and radiographic examinations show excellence esthetic results and satisfaction of patient. The forced extrusion can be a viable treatment option in the management of crown root fracture of an anterior tooth to gain bone in a vertical direction. This case emphasizes that to achieve the esthetic result a multidisciplinary approach is necessary.

Optimizing Maxillary Aesthetics of a Severe Compromised Tooth through Orthodontic Movement and Dental Implants

Treatment of severe compromised tooth in the maxillary anterior area still poses great challenge to the clinicians. Several treatment modalities have been proposed to restore the function and aesthetics in teeth with advanced periodontal disease. The present study aims to report a case of traumatic injury of a left-maxillary central incisor with ridge preservation, orthodontic movement, and implant therapy. A 45-year-old woman underwent the proposed treatment for her left central incisor: basic periodontal therapy, xenogenous bone graft, and guided bone regeneration (GBR). Six months after the graft procedure, orthodontic movement by means of alignment and leveling was made and a coronal displacement of the gingival margin and vertical bone apposition could be observed after 13 months of active movement. Afterwards, a dental implant was placed followed by a connective tissue graft and immediate provisionalization of the crown. In conclusion, orthodontic movement was effective to improve the gingival tissue and alveolar bone prior to implant placement favoring the aesthetic results. Six years postoperatively, the results revealed height and width alveolar bone gain indicating that the treatment proposed was able to restore all the functional and aesthetic parameters.