An up to 7-Year Retrospective Analysis of Biologic and Technical Complication With the All-on-4 Concept

Critical evaluation of YouTube videos regarding the all-on-4 dental implant treatment concept: A content-quality analysis

STATEMENT OF PROBLEM

Rehabilitation of complete edentulous arches by using the all-on-4 dental implant treatment concept is a well-established procedure. Considering the popularity of YouTube as a source for health-related information, a thorough investigation of the content-quality and reliability of videos regarding the all-on-4 concept is lacking.

PURPOSE

The purpose of this cross-sectional analysis was to critically appraise the content-quality and reliability of YouTube videos regarding the all-on-4 dental implant treatment concept as a source of information for patients, students, and dentists.

MATERIAL AND METHODS

A comprehensive search was performed on the YouTube website using the specific keyword "All-on-4," which was identified as the most appropriate search term by the Google Trends website. Only English language videos regarding the all-on-4 dental implant treatment concept were included for systematic analyses. Following the eligibility criteria, the included videos were assessed for their demographic characteristics and quality-content. Based on the content score, the videos were categorized as low content (LC) and moderate + high content (MHC) groups. Further, qualitative analyses were performed by using the DISCERN tool and a global quality (GQ) scale. Statistical analyses were conducted by using the Mann-Whitney U test and the Spearman correlation analysis (α=.05).

RESULTS

Of 250 screened videos, only 73 were eligible for final analyses. The included videos presented an average 123 846 (range, 4 to 3 182 404) views with a mean duration of 528 (range, 12 to 1699) seconds. In addition, the average number of likes was 1122 (range, 0 to 3300), but, remarkably, none of the included videos received any dislikes. Overall, the mean content-quality score was 6.2 ±3.8, thus indicating low-quality content. The average DISCERN and GQ scores were 47.73 ±9.94 and 3.41 ±0.95, with the Spearman rank correlation test showing a strong positive correlation (r=.732; P<.001) among the total obtained scores. Moreover, statistically significant differences were reported between the LC and MHC groups for both DISCERN and GQ scores (P<.001).

CONCLUSIONS

The reliability of YouTube videos regarding the all-on-4 dental implant treatment concept is questionable, as they exhibit poor content-quality, thus making them an unreliable source for patients, students, and dentists seeking accurate information.

Implant survival rate and marginal bone loss with the all-on-4 immediate-loading strategy: A clinical retrospective study with 1 to 4 years of follow-up

STATEMENT OF PROBLEM

Assessing peri-implant marginal bone loss (MBL) and its risk factors with cone beam computed tomography (CBCT) may clarify the risk factors for the all-on-4 (5 or 6) strategy and further improve its survival rate.

PURPOSE

The purpose of this retrospective clinical study was to evaluate the implant survival rate, MBL, and associated risk factors of all-on-4 (5 or 6) prostheses after 1 to 4 years of follow-up with CBCT.

MATERIAL AND METHODS

A total of 56 participants rehabilitated with 325 implants by using the all-on-4 (5 or 6) concept between October 2015 and December 2019 were included. Outcome measures were cumulative implant survival (life-table analysis) and MBL. Four CBCT scans, a scan immediately after surgery (T0), a scan 1 year after surgery (T1), a scan 2 years after surgery (T2), and a scan 3 to 4 years after treatment (T3), were obtained to evaluate the MBL. The Pearson correlation coefficient analysis and linear mixed models were performed to assess the potential risk factors for MBL (α=.05).

RESULTS

The implant survival rate was 99.38%, and the prosthesis survival rate was 100%. The reductions in the vertical buccal bone height (△VBBH) were 0.74 ±0.10 mm (T0-T1), 0.37 ±0.12 mm (T1-T2), and 0.15 ±0.14 mm (T2-T3). Except for T2-T3, the △VBBH showed a significant difference at T0-T1 and T1-T2 (P≤.05). The alterations in vertical mesial bone height (VMBH), vertical distal bone height (VDBH), and vertical lingual bone height (VLBH) were similar to the trend observed in VBBH. The △VBBH (T0-T3) was negatively correlated with the horizontal buccal bone thickness (HBBT) (T0) (r=-.394, P<.001). Linear mixed models revealed that factors such as smoking (P=.001), mandible implant site (P<.001), immediate implant (P=.026), tilted implant (P<.001), female sex (P=.003), systemic disease (P=.025), and bruxism (P=.022) negatively affected MBL. The cantilever length (CL) also had a negative effect on MBL around the implants at the distal extension (P<.001).

CONCLUSIONS

The high implant and prosthesis survival rates and low MBL confirmed the predictability of the all-on-4 (5 or 6) concept. Smoking, mandible implant site, systemic disease, bruxism, female sex, immediate implant, tilted implant, and CL were identified as potential risk factors for MBL.

"All-on-4" and "All-on-6" treatment concept applied using computer-guided surgery in a patient: Case report with a 2-year follow-up

This case aimed to assess the clinical and radiographic outcomes of the All-on-4 and the All-on-6 concept using three-dimensional computer-assisted treatment planning, and computer-guided surgery. Two years after the treatment, the "All-on-4" and "All-on-6" concepts provided effective treatment for immediate restoration and showed predictable outcomes in a completely edentulous patient.

Digital Workflow for Prosthetically Driven Implants Placement and Digital Cross Mounting: A Retrospective Case Series

Fully digital workflow in implant dentistry is ever increasing. Treatment of partial edentulous cases is well-documented; nevertheless, complete edentulous cases are still a challenge. To present several innovations in the treatment of complete edentulous patients using digital solutions, both for implant placement and restoration delivery, was the objective of this study. It was designed as a retrospective case series study, aimed to tune further research with larger sample size, and a longer follow-up. Patients requiring complete, implant-supported restoration were asked to participate in this study. Enrolled patients were treated with four implants, immediate loading and a definitive complete arch restoration. Patients were treated using computer-assisted, template-based surgery. Multi-piece surgical templates were used to accurately place the implants, to manage the bone if needed and to make immediate loading procedure quicker and easier. After osseointegration period, definitive, extra-oral, digital impressions were taken using newly developed scan analogs, connected in the patient mouth using temporary cylinders and stabilized by means of the low-shrinkage, flowable, resin composite. Outcomes were implant and prosthesis survival rate, complications, accuracy, and patient satisfaction. Radiographic evaluation performed with a preliminary, radiopaque aluminum try-in, was used to test the accuracy of the digital impressions. Overall, 20 implants were placed in five patients. All the implants osseointegrated without complications. One impression was taken a second time due to inaccuracy of the aluminum tray-in. Finally, all of the patients were completely satisfied with both surgical and prosthetic procedures. Within the limitations of this case series, multi-piece surgical templates showed promising results improving the clinician’s confidence in the case of bone reduction, post-extractive implants and immediate loading. The prosthetic template increased the trueness of the digital impression for complete edentulous patients. Finally, even if an impression was performed again, the scan-analog used for extra-oral chair-side digital impressions seemed to be a promising tool. Continuous improvements and further study are needed to confirm these preliminary results.

Dental Implants Inserted in Fresh Extraction Sockets versus Healed Sites: A Systematic Review and Meta-Analysis

The present review aimed to evaluate the difference of dental implant failure rates and marginal bone loss (MBL) between implants inserted in fresh extraction sockets or healed sites. Electronic search was undertaken in three databases, plus manual search of journals, including studies randomized or not. Meta-analyses were performed besides meta-regressions, in order to verify how the odds ratio (OR) and MBL were associated with follow-up time. The review included 163 publications. Altogether, there were 17,278 and 38,738 implants placed in fresh extraction sockets and healed sites, respectively. Pairwise meta-analyses showed that implants in sockets had a higher failure risk in comparison to healed sites: OR 1.349, all studies included; OR 2.070, only prospective non-RCTs; OR 2.487, only RCTs (all p < 0.001). The difference in implant failure between the groups was statistically significant in the maxilla (OR 1.616, p = 0.029), but not in the mandible (OR 2.192, p = 0.075). The MBL mean difference (MD) between the groups was -0.053 mm (p = 0.089). There was an estimated decrease of 0.003 in OR (p = 0.284) and an increase of 0.006 mm (p = 0.036) in the MBL MD between groups for every additional month of follow-up. In conclusion, implants placed in fresh extraction sockets present higher risk of failure than implants placed in healed sites.

Clinical performance of narrow-diameter titanium-zirconium implants in immediately loaded fixed full-arch prostheses: a 2-year clinical study

Objectives

The aim of this study was to evaluate the outcomes of immediate fixed full-arch prostheses supported by axial or tilted narrow-diameter Ti-Zr implants (3.3 mm) (Roxolid®, Institut Straumann® AG, Basel, Switzerland) (NDIs) in combination with standard-diameter implants up to 2 years’ follow-up.

Materials and methods

The study was conducted at Kocaeli University Faculty of Dentistry from 2016 to 2018. 37 jaws of 28 patients with an average age of 52 years were rehabilitated with fixed full-arch prostheses supported by 179 implants. Cumulative survival rate (CSR), implant success, marginal bone loss (MBL), and prosthetic survival rate as well as complications were analyzed.

Results

Total CSR of 99.4% and 98.5% for all and narrow implants respectively have been observed at 2 years’ follow-up. No prosthesis failures were observed, yielding a cumulative prosthetic survival rate of 100%. The NDIs achieved 0.63 mm MBL at 1 year and 1.02 mm at 2 years. The mean MBL at 1 year was 0.51 mm (mandible 0.63 mm/maxilla 0.41 mm) and 0.73 mm (mandible 0.90 mm/maxilla 0.43 mm) at 2 years. Both implant angulation and loading protocol did not influence the MBL.

Conclusions

The combination of narrow-diameter implants with standard-diameter implants in immediate fixed full-arch rehabilitation has a good prognosis to become a new standard of care for severely atrophic jaws.

Clinical relevance

The use of narrow-diameter implants in fixed full-arch rehabilitations in atrophic ridges would be a successful and predictable treatment approach.

Six-year clinical outcomes of implant-supported acrylic vs. ceramic superstructures according to the All-on-4 treatment concept for the rehabilitation of the edentulous maxilla

The aim of the current study was to document the long-term clinical results of the use of two prosthetic techniques for the rehabilitation of completely edentulous maxillae according to the “All-on-Four” concept: Fixed, screw-retained prosthesis mounted on a chrome-molybdenum framework with (1) metal-ceramic veneers and (2) Acrylic prosthesis with acrylic resin prosthetic teeth. A total of 34 patients were assigned to subgroups according to their own preference of the superstructure type (ceramics [n: 17] or acrylic resin [n: 17]). Prosthetic complications, marginal bone loss, plaque accumulation, bleeding on probing, bite force and oral-health-related quality of life were assessed over a period of 6 years. Marginal bone loss around implants of the ceramic group remained well within the limits for ‘success’, as defined by the 2007 Pisa consensus over the time (1.43 ± 0.35 mm). However, marginal bone loss was significantly more pronounced around the implants in the acrylic group (2.15 ± 0.30) and the difference between two groups was statistically significant (p: 0.00). Bleeding on probing and plaque accumulation showed also positive correlation with marginal bone loss. Both acrylic and ceramic suprastructures appeared to be equivalent after 6 years; however, ceramic suprastructures revealed superior clinical results in terms of bone loss and plaque accumulation. Current study determines the long-term clinical outcomes of different prosthetic management alternatives in All-on-Four and aids to increase dental professionals’ ability to meet the patients’ expectations.

Biomechanical Behavior of All-on-4 and M-4 Configurations in an Atrophic Maxilla: A 3D Finite Element Method

BACKGROUND In edentulous patients, the concept of 4 implants with early loading has been widely used in clinical settings. In the case of bone atrophy in the anterior maxilla, using short implants or an angulated implant may be a good choice for treatment. The occlusal scheme remains a key aspect of All-on-4. The aim of this study was to use the 3-dimensional (3D) finite element method (FEM) to evaluate how different All-on-4 designs for canine-guided and group function occlusion affected the distribution of stress in the atrophic premaxilla. MATERIAL AND METHODS A 3D edentulous maxilla model was created and in 3D FEM, 3 different configurations - M4, All-on-4, and short implant - were modeled by changing the anterior implants and using 2 different occlusal schemes. For each model, the occlusal load was applied to simulate lateral movements. For cortical bone, the maximum and minimum principal stress values were generated, and for ductile materials, von Mises stress values were obtained. RESULTS No significant differences were detected among the models; generally, however, the highest stress values were observed in the M-4 model and the models with short implants. Slightly higher stress values were observed in the group function occlusion group than in the canine-guided occlusion group. CONCLUSIONS To promote better primary stabilization, M-4 or short implant configurations with canine-guided occlusion appear to be preferable for patients who have severe atrophy in the anterior maxilla.

Implant Placement Following Crestal Sinus Lift with Sequential Drills and Osteotomes: Five Years after Final Loading Results from a Retrospective Study

The aim of this retrospective study was to clinically evaluate the five-year outcomes of implants placed following a combined approach to the sinus, consisting of sequential drills and osteotomes. Medical records of patients with implants placed in combination with crestal sinus lift using sequential drills and osteotomes, with a residual alveolar bone crest between 4 to 8 mm, and a follow-up of at least five years after final loading, were evaluated. Outcomes were implant and prosthetic survival and success rates, any complication, and marginal bone loss. Data from 96 patients (53 women and 43 men; mean age 54.7 years; range 23-79 years) were collected. A total of 105 single implants were analyzed. After five years of function, two implants were lost and two prostheses failed. No major biological or prosthetic complications occurred. At the five-year examination, the marginal bone loss was 1.24 ± 0.28 mm. Within the limitations of this retrospective study it can be concluded that implants placed following a combined approach to the sinus consisting of sequential drills and osteotomes seem to be a viable option for the treatment of posterior atrophic edentulous maxilla.

Comparative Analysis of the Stability of Prosthetic Screws under Cyclic Loading in Implant Prosthodontics: An In Vitro Study

Background: To compare the loss of preload in absence of loading and after a fixed number of cyclic loadings on 7-mm distal cantilever in two different connection systems using all-on-four prosthetic model. Methods: Two equal models of an edentulous mandible rehabilitated with all-on-four technique with two types of abutment system (MUA and OT-Bridge) supporting a hybrid prosthesis, were used. Initial torque values of the prosthetic fixing screw, after ten minutes from initial screw tightening and after 400,000 repeated loadings were registered using a mechanical torque gauge. Differences between initial and final torque values were reported for each anchoring system and the two systems were finally compared. Results: No statistically significant differences regarding the loss of preload between MUA and OT-Bridge system were found after 400,000 cyclic loadings; however, in MUA system it was found between anterior and posterior implant screws. A significant difference in preload loss was found only for MUA system comparing the initial screw torque to that measured after 10 min from the tightening in absence of cyclic loadings. Conclusions: Within the limits of the present study, MUA and OT-Bridge may be considered reliable prosthetic anchoring systems able to tolerate repeated cyclic occlusal loads on distal cantilever in all-on-four rehabilitation model without any significant loss of preload in screw tightening.

A fixed reconstruction of fully edentulous patients with immediate function using an apically tapered implant design: a retrospective clinical study

Background

Immediate function has become an accepted treatment modality for fixed restorations in completely edentulous jaws. It is known that implant microtopography (surface) may enhance osseointegration, while implant macrotopography (macrodesign) plays an important role in primary stability in the patient requiring an immediate loading. The aim of this retrospective study was to evaluate the clinical and radiographic outcomes of the edentulous subjects treated with narrow and/or regular diameter, which placed and loaded immediately.

Methods

Forty-two consecutive patients received 171 implants, including regular and narrow diameter implants (NDIs). Each jaw, 19 mandibles and 24 maxillae, was treated with a fixed-full arch prosthesis according to the Straumann® Pro Arch concept. The majority (95%) of the restorations were supported by four implants, of which the posterior two implants were tilted. A provisional functional acrylic prosthesis was delivered on the day of surgery. All patients were followed up to 55 months. Cumulative survival rate was determined using Kaplan-Meier analysis. Radiological measurement of marginal bone level was performed.

Results

The overall follow-up time for survival rate was up to 55 months. Four implants (3 implants in maxilla, 1 implant in mandible) were lost, resulting in an overall cumulative implant survival rate of 97.7%. Implant survival rate in the axial and tilted implants was not statistically significant. The mean of interproximal marginal bone loss was 0.15 mm after 24 months. Good soft tissue health was observed in almost 99% of patients. The final prosthesis survival rate was 100%.

Conclusions

The results of this retrospective pilot study indicated that total edentulous patients requiring an immediate implant placement and loading can be successfully treated with this implant design. The improved mechanical properties of these implants might give a more conservative treatment option for the jaws showing a severe horizontal alveolar bone resorption.

Supplementary Information

The online version contains supplementary material available at 10.1186/s40729-020-00271-1.

All-on-4 Concept Update

Over the past 17 years, the All-on-4 treatment concept has been a reliable and predictable modality to rehabilitate edentulous jaws with immediate function as full-arch prostheses. This article highlights clinically relevant data compiled by numerous All-on-4 investigators including complications and their remedies, occlusion and cantilever trends, implant size utilization, and controversial topics. We provide insights for navigating the complexities of medically diverse populations, faced by our daily practice, with a focus on patient avoidance, risk factors for implant and prosthetic failures, in hopes to minimize complications so clinicians would choose this treatment with confidence.

Feasibility of Using a Prosthetic-Based Impression Template to Improve the Trueness and Precision of a Complete Arch Digital Impression on Four and Six Implants: An In Vitro Study

Background: Intraoral scanners (IOSs) in implantology represent a viable approach for single teeth or partial arches. However, when used for complete edentulous arches or long-span edentulous areas, it has been demonstrated that there is a need for improvement of IOS-related techniques. Therefore, the aim of this in vitro study was to assess the trueness and precision of a complete arch digital impression on four and six implants taken with or without a customized, prosthetic-based impression template. Materials and Methods: Two experimental models were prepared, representative of a complete edentulous mandible restored with four and six implants with built-in scan abutments. Models were scanned with (test group, TG) or without (control group, CG) the prosthetic-based impression template. Eight scans were taken for each model. The time needed to take impressions, error, trueness, and precision were evaluated. A statistical analysis was performed. Results: In the case of four implants, the time needed for the impression was 128.7 ± 55.3 s in the TG and 81.0 ± 23.5 s in the CG (p = 0.0416). With six scan abutments, the time was 197.5 ± 26.8 and 110.6 ± 25.2 s in the TG and CG, respectively (p = 0.0000). In the TG, no errors were experienced, while in the CG, 13 impressions were retaken due to incorrect stitching processes. In the four-implant impression, the mean angle deviation was 0.252 ± 0.068° (95% CI 0.021–0.115°) in the CG and 0.134 ± 0.053° (95% CI 0.016–0.090°) in the TG. The difference was statistically significant (p = 0.002). In the six-implant impression, the mean angle deviation was 0.373 ± 0.117° (95% CI 0.036–0.198°) in the CG and 0.100 ± 0.029° (95% CI 0.009–0.049°) in the TG (p = 0.000). In the TG, there were no statistically significant differences in the mean angle deviation within the group (p > 0.05), but there were in the CG. A colorimetric analysis showed higher deviations from the original model for the six-implant impression without a prosthetic template. Conclusions: Although all of the impressions exhibited deviation from the original model in the range of clinical acceptability, the prosthetic-based impression template significantly improved the trueness and precision of complete edentulous arches rehabilitated with four or six implants, making the complete arch digital impression more predictable.

Hybrid Polyetheretherketone (PEEK)-Acrylic Resin Prostheses and the All-on-4 Concept: A Full-Arch Implant-Supported Fixed Solution with 3 Years of Follow-Up

Background: The aim of this three-year prospective study was to examine the outcome of a solution for full-arch rehabilitation through a fixed implant-supported hybrid prosthesis (polyetheretherketone (PEEK)-acrylic resin) used in conjunction with the All-on-4 concept. Methods: Thirty-seven patients (29 females, 8 males), with an age range of 38 to 78 years (average: 59.8 years) were rehabilitated with 49 full-arch implant-supported prostheses (12 maxillary rehabilitations, 13 mandibular rehabilitations and 12 bimaxillary rehabilitations). The primary outcome measure was prosthetic survival. Secondary outcome measures were marginal bone loss, plaque and bleeding scores, veneer adhesion issues, biological complications, mechanical complications, and the patients’ subjective evaluation. Results: There were two patients (maxillary rehabilitations) lost to follow-up, while one patient withdrew (maxillary rehabilitation). One patient with bimaxillary rehabilitation fractured the mandibular PEEK framework, rendering a 98% prosthetic survival rate. Implant survival was 100%. Average (standard deviation) marginal bone loss at 3-years was 0.40 mm (0.73 mm). Veneer adhesion was the only technical complication (n = 8 patients), resolved for all patients. Nine patients (n = 11 prostheses) experienced mechanical complications (all resolved): fracture of acrylic resin crowns (n = 3 patients), prosthetic and abutment screw loosening (n = 4 patients and 3 patients, respectively), abutment wearing (n = 1 patient). One patient experienced a biological complication (peri-implant pathology), resolved through non-surgical therapy. A 90% satisfaction rate was registered for the patients’ subjective evaluation. Conclusions: Based on the results, the three-year outcome suggests the proposed rehabilitation solution as a legitimate treatment option, providing a potential shock-absorbing alternative that could benefit the implant biological outcome.

Minimally Invasive Treatment of Edentulous Maxillae with Overdenture Fully Supported by a Cad/Cam Titanium Bar with a Low-Profile Attachment Screwed on Four or Six Implants: A Case Series

Rehabilitation of atrophic maxilla still remains a challenge. Fixed implant-supported restorations have become more predictable in the last years; nevertheless, technical and biological complications still occur. Removable overdenture fully supported by a CAD/CAM titanium bar seems to be a viable treatment option for the rehabilitation of completely edentulous patients with a high degree of bone resorption. In these clinical cases, the soft tissues of the lower third of the face need to be respected, and a fixed-removable solution is the only option to have good hygiene control. Nevertheless, there is no consensus about the optimal number and position of the implants. A total of six adult patients were recruited and treated with an overdenture fully supported by a CAD/CAM titanium bar and low-profile attachment, screwed on four or six implants. A detailed step-by-step description of the procedures was presented. Overall, all the patients were successful treated with no relevant complications. With the limitations of this case series, maxillary implant overdenture fully supported by four or six implants seems to be a safer treatment option for the minimally invasive rehabilitation of atrophic maxillae, regardless of the number of implants.

Clinical assessment of implant-supported full-arch immediate prostheses over 6 months of function

OBJECTIVE

To assess the clinical outcomes of implant-supported full-arch immediate prosthesis over 6 months of functions and analyze the risk factors of prosthetic complications.

MATERIALS AND METHODS

This retrospective cohort study included patients who were treated with implant-supported full-arch restoration under immediate loading protocol between April 2008 and June 2016, and who wore the immediate prosthesis for more than 6 months. Medical charts were reviewed for the patients' general information, implant information, prosthetic information, and details of any prosthetic complications. Prosthetic complications were classified as follows: class I, prosthesis loosening; class II, fewer than three artificial teeth fractured; class III, three or more artificial teeth fractured; and class IV, resin base fractures. A cox proportional hazards ratio model was adopted to analyze the potential risk factors for class IV complications.

RESULTS

A total of 114 patients (mean age, 56.73 ± 10.19 years) and 144 prostheses were included. The average wearing time for the immediate prosthesis was 21.9 months, and 62 (54.39%) patients experienced prosthetic complications, 30 of whom suffered from complications more than once. The most common complications were class II complications (12.3%) during the first 6 months of functioning and class IV complications (28.1%) during the entire function period. Class II complications were more common in the anterior region, while class IV complications occurred more often in the posterior region. The multivariable Cox proportional hazards regression model showed that a prosthesis in the maxilla (HR = 3.37, P = .001) and fiber reinforcement (HR = 0.39, P = .021) were significantly related to class IV complications.

CONCLUSIONS

Implant-supported full-arch immediate prosthesis functioning over 6 months have a high prevalence of prosthetic complications. Fiber-reinforcement could reduce the prevalence of class IV complications when acrylic immediate prosthesis functioned longer than 6 months. Avoiding using the anterior teeth of the immediate prosthesis to tear pliable but strong food may prevent tooth fracture.

The All-on-4 treatment concept for the rehabilitation of the completely edentulous mandible: A longitudinal study with 10 to 18 years of follow-up

BACKGROUND

There is a need for studies evaluating the long term outcomes of the All-on-4 treatment concept.

PURPOSE

To evaluate the long term clinical and radiographic outcomes of the All-on-4 treatment concept in the mandible.

MATERIALS AND METHODS

This retrospective longitudinal case series study included 471 patients (women: 286, men: 185, average age = 57.7 years) rehabilitated with 1884 implants in immediate function supporting 471 fixed full-arch mandibular prostheses and followed for 10 to 18 years. Primary outcome measures were prosthetic survival and implant success and survival (estimated using life tables). Secondary outcome measures were marginal bone loss (MBL) at 10 and 15 years, biological and mechanical complications. Multivariable analysis was used to estimate potential risk indicators for implant failure (Cox regression to estimate hazard ratios and 95% confidence intervals (95%CI)), MBL > 3 mm at 10 and 15 years, biological and mechanical complications (binary logistic regression to estimate odds ratios [ORs] with 95%CI).

RESULTS

Twenty-seven patients deceased (5.7%) and 149 patients (31.6%) were lost to follow-up. The cumulative prosthetic survival rate was 98.8%; the implant cumulative survival and success rate was 93% and 91.7%, respectively up to 18 years of follow-up. Previous biological complications (HR = 4.43) were significantly associated with implant failure. Average (95% CI) MBL at 10- and 15-years were 1.72 mm (95%CI: 1.59, 1.85) and 2.32 mm (95% CI: 1.98, 2.66). Smoking (OR = 2.72), previous failure of a contiguous implant (OR = 3.89) and biological complication (OR = 8.11) were associated with MBL > 3 mm. The incidence of biological complications was 11.8% at implant level, with previous failure of a contiguous implant (OR = 5.56), smoking (OR = 1.75), and systemic condition (OR = 1.65) were significantly associated. The incidence of mechanical complications was 36.7% with male gender (OR = 1.67) and type of prosthetic material used in the restoration significantly associated (metal-acrylic OR = 0.30; metal-ceramic OR = 0.22)).

CONCLUSIONS

Considering the implant, prosthetic and MBL outcomes it is concluded that the All-on-4 is a viable treatment option validated in the long term. Nevertheless, biological and mechanical complications can occur.

Clinical performance of intentionally tilted implants versus axially positioned implants: A systematic review

OBJECTIVES

The aim of this review was to determine the clinical performance of dental implants that are intentionally tilted when compared with implants that are placed following the long axis of the residual alveolar ridge.

MATERIALS AND METHODS

A systematic review of the scientific literature using a predefined research question (PICO) and search strategy was undertaken. This search included five electronic databases. Two independent reviewers examined electronic databases and performed a manual review following search strategy to accomplish the item generation and reduction. Included articles were evaluated to determine the level of evidence. Data were extracted only from level I and level II studies, based on the Oxford Centre for Evidence-based Medicine-Levels of Evidence (March 2009). If included studies were homogeneous in nature, data were to be accumulated. However, if included studies were heterogeneous in nature, only descriptive data would be reviewed and analyzed.

RESULTS

A total of 811 articles were identified through the PICO question and search strategy. Detailed review of the abstracts and articles resulted in further item reduction, and 46 articles were included for full-text review. A total of 42 articles were then selected for inclusion in the systematic review. The identified articles included two level I and 20 level II studies. In addition, 15 level IV, one gray literature, and four previous systematic reviews with meta-analyses were also used in the study. The extracted data from the included studies demonstrated heterogeneity that prevented quantitative assessment, and only one level II study directly compared tilted and axially placed implants. Assessment of the descriptive data demonstrated no differences in implant survival, marginal bone loss, prosthesis survival, or patient-reported outcome measures (PROMs) whether implants are placed axially or with intentional inclination of the coronal aspect of the implant toward the distal aspect of edentulous jaws.

CONCLUSIONS

Based upon the systematic review of the literature, an analysis of the descriptive data suggested no differences in clinical performance between implants that are placed in an axial position relative to the residual alveolar ridge when compared with implants that are intentionally tilted toward the distal aspect of edentulous jaws.

Multicenter Retrospective Analysis of Implant Overdentures Delivered with Different Design and Attachment Systems: Results Between One and 17 Years of Follow-Up

PURPOSE

To analyze implant and prosthetic survival rates, complications, patient satisfaction, and biological parameters of patients rehabilitated with implant overdentures (IOV) on splinted and nonsplinted implants and different attachment systems, in function for one to 17 years.

METHODS

This retrospective study evaluated data collected from patients rehabilitated with implant overdentures between January 2001 and December 2016 in nine different centers. Outcome measures were implant and prosthetic success rates, mechanical complications, marginal bone loss (MBL), oral health impact profile (OHIP), bleeding on probing, and plaque index.

RESULTS

A total of 581 implants were installed in 194 patients. Patients were followed for a mean period of 60.6 months (range 6⁻206). Eighty-nine patients received 296 low profile attachment (OT Equator), 62 patients received 124 ball attachments, and 43 patients received 107 Locator attachments. In eighty-three patients the implants were splinted with computer aided design/computer aided manufacturing (CAD/CAM) or casted bar. At the last follow-up, 10 implants failed in eight patients. Statistical significance was found for failed prostheses (P = 0.0723) and complications (P = 0.0165), with better values for splinted implants. No statistically significant differences were found in proportion of implant and prosthetic failure (P > 0.05). At a five-year follow-up, proportion of complications (P = 0.0289) and failed prostheses (P = 0.0069) were statistically higher for IOV on Locator attachments. No difference was founded in MBL at one- and two-year follow-up between different attachment systems (P > 0.05). Statistically significant improvement in all the OHIP categories was reported in all the patients, after one year of function.

CONCLUSIONS

Implant overdenture showed high implant and prosthetic survival rates, low complications, high patient satisfaction, and good biological parameters in the long-term follow-up. Splinting the implants may reduce number of mechanical complications. Locator attachments showed higher number of complications. Further studies are needed to confirm these preliminary results.

Finite Element Stress Analysis of Applied Forces to Implants and Supporting Tissues Using the "All-on-Four" Concept with Different Occlusal Schemes

PURPOSE

The aim of this study was to evaluate stress distributions on implants and alveolar bone due to occlusal load produced during chewing by prostheses prepared according to the All-on-Four concept with different occlusal schemes using a finite element analysis method.

MATERIALS AND METHODS

On standard jaw models, teeth were set in accordance with the basic standards of canine-guided occlusion, group function occlusion, bilateral balanced occlusion (BBO), lingualized occlusion, and monoplane occlusion schemes. Three-dimensional (3D) images of these models were obtained using a surface scanner. Implants, superstructures, the maxilla, and mandible were modeled in the All-on-Four concept with 3D modeling software. Forces were defined on contacts formed in maximum intercuspation, lateral, and protrusive movement position for all 5 occlusion types. Stress outputs were recorded as maximum and minimum principal stresses (P_max , P_min ) and von Mises stress values for the implants.

RESULTS

The highest P_max value for the maxilla was observed in cortical bone in the group function occlusion during lateral movement (15.56 MPa). For the mandible, the highest P_max value was observed on the cortical bone in maximum intercuspation of lingualized occlusion (72.75 MPa). The highest P_min value for the maxilla was observed during the lateral movement in group function and for the mandible in BBO (-29.23 and -86.31 MPa, respectively). The lowest stress values were observed with canine-guided occlusion in all related conditions and on all structures.

CONCLUSIONS

With the limitations of this simulation study, considering stresses on alveolar bone and implants in All-on-Four applications, the use of canine-guided occlusion may be suggested.

Combination of straight and tilted implants for supporting screw-retained dental prostheses in atrophic posterior maxillae: A 2-year prospective study

OBJECTIVES

To evaluate the two-year survival rate (SR) and marginal bone loss (MBL) of fixed dental prostheses (FDPs) supported by straight (S) and tilted (T) implants under the influence of diverse study variables.

METHODS

A prospective investigation comprising 21 patients provided with a total of 27 maxillary screw-retained restorations fixed to 70 dental implants was developed. Two groups of implants were considered depending on their inclination with respect to the occlusal plane: Group 1 (S, n=37): straight/axial implants and Group 2 (T, n=33): tilted/angled fixations. Each FDP was supported by a combination of S and T implants. SR and MBL were assessed at the time of loading and two years after surgery. Patient-, surgical- and/or rehabilitation-related information was gathered. Data were statistically analysed at the α=0.05 significance level.

RESULTS

After 24 months, a 100% SR was achieved and the MBL of S and T implants were statistically similar. T implants located in the molar region showed lower MBL than did those replacing premolars (p=0.031).

CONCLUSIONS

Upright and angled fixations inserted at posterior maxillary areas resulted in comparable survival rates and peri-implant MBL after two years. The marginal bone resorption around tilted implants depended on their location.

CLINICAL SIGNIFICANCE

Screw-retained restorations fixed to straight and tilted implants seem to be a safe treatment option in posterior atrophic maxillae.

The all-on-four treatment concept: Systematic review

Objectives

To systematically review the literature on the “all-on-four” treatment concept regarding its indications, surgical procedures, prosthetic protocols and technical and biological complications after at least three years in function.

Study Design

The three major electronic databases were screened: MEDLINE (via PubMed), EMBASE, and the Cochrane Library of the Cochrane Collaboration (CENTRAL). In addition, electronic screening was made of the ‘grey literature’ using the System for Information on Grey Literature in Europe - Open Grey, covering the period from January 2005 up to and including April 2016.

Results

A total of 728 articles were obtained from the initial screening process. Of these articles, 24 fulfilled the inclusion criteria. Methodological quality assessment showed sample size calculation to be reported by only one study, and follow-up did not include a large number of participants - a fact that may introduce bias and lead to misleading interpretations of the study results.

Conclusions

The all-on-four treatment concept offers a predictable way to treat the atrophic jaw in patients that do not prefer regenerative procedures, which increase morbidity and the treatment fees. The results obtained indicate a survival rate for more than 24 months of 99.8%. However, current evidence is limited due the scarcity of information referred to methodological quality, a lack of adequate follow-up, and sample attrition. Biological complications (e.g., peri-implantitis) are reported in few patients after a mean follow-up of two years. Adequate definition of the success / survival criteria is thus necessary, due the high prevalence of peri-implant diseases.

Key words:All-on-four, all-on-4, tilted implants, dental prostheses, immediate loading.