Iliac Anastomotic Stenting With a Sirolimus-Eluting Biodegradable Poly-L-Lactide Stent: A Preliminary Study After 6 Weeks

Comparison of early vascular morphological changes between bioresorbable poly-L-lactic acid scaffolds and metallic stents in porcine iliac arteries

Bioresorbable scaffolds have the potential to overcome several problems associated with metallic stents. Bioresorbable poly-L-lactic acid (PLLA) scaffold implantation for the treatment of peripheral artery disease has already been reported in animal models and clinical trials; however, no studies comparing PLLA scaffolds and bare metal stents (BMSs) with regard to early vascular morphological changes, identified using intravascular ultrasound (IVUS) analysis, have been reported. In this study, PLLA scaffolds and BMSs were implanted bilaterally in iliac arteries of five miniature pigs. Digital subtraction angiography and IVUS were performed before and immediately after stent implantation and at 6-week follow-up. All PLLA scaffolds and BMSs were patent at 6-week follow-up. Per IVUS analysis, the percent area stenosis did not significantly differ between PLLA scaffolds and BMSs (65.7% vs. 67.2%, P = .761). Furthermore, percent vessel lumen change also did not differ significantly. Neointima formation (the neointimal area plus medial area) was significantly less with PLLA scaffolds than with BMSs (15.65 mm² vs. 25.69 mm², P < .001). In conclusion, based on IVUS results, short-term results after stent implantation in porcine iliac arteries were comparable between PLLA scaffolds and BMSs. Therefore, PLLA scaffolds are safe and feasible for implantation in peripheral arteries.

Enhancing Stent Effectiveness with Nanofeatures

Drug-eluting stents are an effective therapy for symptomatic arterial obstructions, substantially reducing the incidence of restenosis by suppressing the migration and proliferation of vascular smooth muscle cells into the intima. However, current drug-eluting stents also inhibit the growth of endothelial cells, which are required to cover the vascular stent to reduce an excessive inflammatory response. As a result, the endothelial lining of the lumen is not regenerated. Since the loss of this homeostatic monolayer increases the risk of thrombosis, patients with drug-eluting stents require long-term antithrombotic therapy. Thus, there is a need for improved devices with enhanced effectiveness and physiological compatibility towards endothelial cells. Current developments in nanomaterials may enhance the function of commercially available vascular devices. In particular, modified design schemes might incorporate nanopatterns or nanoparticle-eluting features that reduce restenosis and enhance re-endothelialization. The intent of this review is to discuss emerging nanotechnologies that will improve the performance of vascular stents.

Biodegradable polymeric stents for vascular application in a porcine carotid artery model: English version

Over the past years the development of biodegradable polymeric stents has made great progress; nevertheless, essential problems must still be solved. Modifications in design and chemical composition should optimize the quality of biodegradable stents and remove the weaknesses. New biodegradable poly-L-lactide/poly-4-hydroxybutyrate (PLLA/P4HB) stents and permanent 316L stents were implantedendovascularly into both common carotid arteries of 10 domestic pigs. At 4 weeks following implantation, computed tomography (CT) angiography was carried out to identify the distal degree of stenosis. The PLLA/P4HB group showed a considerably lower distal degree of stenosis by additional oral application of atorvastatin (mean 39.81 ± 8.57 %) compared to the untreated PLLA/P4HB group without atorvastatin (mean 52.05 ± 5.80 %). The 316L stents showed no differences in the degree of distal stenosis between the group treated with atorvastatin (mean 44.21 ± 2.34 %) and the untreated group (mean 35.65 ± 3.72 %). Biodegradable PLLA/P4HB stents generally represent a promising approach to resolving the existing problems in the use of permanent stents. Restitutio ad integrum is only achievable if a stent is completely degraded.

New stent surface materials: the impact of polymer-dependent interactions of human endothelial cells, smooth muscle cells, and platelets

Despite the development of new coronary stent technologies, in-stent restenosis and stent thrombosis are still clinically relevant. Interactions of blood and tissue cells with the implanted material may represent an important cause of these side effects. We hypothesize material-dependent interaction of blood and tissue cells. The aim of this study is accordingly to investigate the impact of vascular endothelial cells, smooth muscle cells and platelets with various biodegradable polymers to identify a stent coating or platform material that demonstrates excellent endothelial-cell-supportive and non-thrombogenic properties. Human umbilical venous endothelial cells, human coronary arterial endothelial cells and human coronary arterial smooth muscle cells were cultivated on the surfaces of two established biostable polymers used for drug-eluting stents, namely poly(ethylene-co-vinylacetate) (PEVA) and poly(butyl methacrylate) (PBMA). We compared these polymers to new biodegradable polyesters poly(l-lactide) (PLLA), poly(3-hydroxybutyrate) (P(3HB)), poly(4-hydroxybutyrate) (P(4HB)) and a polymeric blend of PLLA/P(4HB) in a ratio of 78/22% (w/w). Biocompatibility tests were performed under static and dynamic conditions. Measurement of cell proliferation, viability, glycocalix width, eNOS and PECAM-1 mRNA expression revealed strong material dependency among the six polymer samples investigated. Only the polymeric blend of PLLA/P(4HB) achieved excellent endothelial markers of biocompatibility. Data show that PLLA and P(4HB) tend to a more thrombotic response, whereas the polymer blend is characterized by a lower thrombotic potential. These data demonstrate material-dependent endothelialization, smooth muscle cell growth and thrombogenicity. Although polymers such as PEVA and PBMA are already commonly used for vascular implants, they did not sufficiently meet the criteria for biocompatibility. The investigated biodegradable polymeric blend PLLA/P(4HB) evidently represents a promising material for vascular stents and stent coatings.

Drug-releasing implants: current progress, challenges and perspectives

This review presents the different types and concepts of drug-releasing implants using new nanomaterials and nanotechnology-based devices.

Development andIn VitroCharacterization of Hyaluronic Acid-Based Coatings for Implant-Associated Local Drug Delivery Systems

The development of drug-eluting coatings based on hyaluronic acid (HA) is especially promising for implant-associated local drug delivery (LDD) systems, whose implantation provokes high insertion forces, as, for instance, cochlear implants or drug-coated balloons (DCB). The lubricious character of HA can then reduce the coefficient of friction and serve as drug reservoir simultaneously. In this context, we investigated several plasma- and wet-chemical methods for the deposition of HA-based coatings with LDD function on polyamide 12 as a model implant surface, conventionally used for DCB. In contrast to aminosilane, epoxy silane surface layers allowed the covalent attachment of a smooth and uniform HA base layer, which provided good adherence of further HA layers deposited by manual dip coating at a subsequent processing stage. The applied HA-crosslinking procedure during dip coating influences the transfer and release of paclitaxel, which could be reproducibly incorporated via infiltration. While crosslinking with N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide hydrochloride provided HA coatings on DCB, which allowed for an efficient paclitaxel transfer upon expansion in a vessel model, crosslinking with glutardialdehyde resulted in a slower drug release being more appropriate for implants with longer residence time in the body. The developed HA coating is hence well suited for spontaneous and sustained LDD.

Enhanced visualization of biodegradable polymeric vascular scaffolds by incorporation of gold, silver and magnetite nanoparticles

Due to improved tissue regeneration and the enabling of post-operative minimally invasive interventions in the same vessel segment, biodegradable polymeric scaffolds represent a competitive approach to permanent metallic stents in vascular applications. Despite these advantages some challenges, such as the improvement of the scaffold mechanics and enhancement of scaffold visibility during the implantation procedure, are persisting. Therefore, the scope of our studies was to investigate the potential of gold, silver and magnetite nanoparticles incorporated in a polymeric blend of poly(L-lactide)/poly(4-hydroxybutyrate) for image enhancement in X-ray, magnetic resonance or near-infrared imaging. Their impact on mechanical properties of such modified scaffold materials was also evaluated.

Magnesium used in bioabsorbable stents controls smooth muscle cell proliferation and stimulates endothelial cells in vitro

Magnesium-based bioabsorbable cardiovascular stents have been developed to overcome limitations of permanent metallic stents, such as late stent thrombosis. During stent degradation, endothelial and smooth muscle cells will be exposed to locally high magnesium concentrations with yet unknown physiological consequences. Here, we investigated the effects of elevated magnesium concentrations on human coronary artery endothelial and smooth muscle cell (HCAEC, HCASMC) growth and gene expression. In the course of 24 h after incubation with magnesium chloride solutions (1 or 10 mM) intracellular magnesium level in HCASMC raised from 0.55 ± 0.25 mM (1 mM) to 1.38 ± 0.95 mM (10 mM), while no increase was detected in HCAEC. Accordingly, a DNA microarray-based study identified 69 magnesium regulated transcripts in HCAEC, but 2172 magnesium regulated transcripts in HCASMC. Notably, a significant regulation of various growth factors and extracellular matrix components was observed. In contrast, viability and proliferation of HCAEC were increased at concentrations of up to 25 mM magnesium chloride, while in HCASMC viability and proliferation appeared to be unaffected. Taken together, our data indicate that magnesium halts smooth muscle cell proliferation and stimulates endothelial cell proliferation, which might translate into a beneficial effect in the setting of stent associated vascular injury.

A doxycycline loaded, controlled-release, biodegradable fiber for the treatment of aortic aneurysms

The pathogenesis of aortic aneurysm (AA) is characterized by degradation of extracellular matrix with increased matrix metalloproteinases (MMPs) and inflammatory reaction. Doxycycline (DOXY) has been reported to control the extension of AA by regulation of MMP. However, systemic administration may cause adverse side effects. In this study, we demonstrated the possibility of local administration of DOXY controlled-release biodegradable fiber (DCRBF) for AA in mice. DCRBF was fabricated by biodegradable polymer (polylactic acid; PLA) mixed with DOXY using an electrospinning technique. DCRBF was cocultured with SMCs, macrophages and aortic tissue, and placed on an abdominal aortic aneurysm which induced apolipoprotein E-deficient mice. We evaluated gene and protein expression of proteases, elastin and inflammatory markers. In the presence of DCRBF, MMP-12 was significantly decreased, TGF-β1 and Lox were significantly increased in SMC gene expression, MMP-9 and -12 significantly decreased gene expression of macrophages. The DCRBF preserved elastin content and decreased MMP-2 and -9 in aortic tissue. In addition, IGF-1 and TIMP-1 were significantly increased and IL-6 and TNF-α were significantly decreased with DCRBF in vivo. In conclusion, our results suggested that local administration of DCRBF may become a promising alternative therapeutic strategy for AA.

A new wave in treatment of vascular occlusive disease: biodegradable stents--clinical experience and scientific principles

Stent-based therapies in percutaneous vascular intervention are associated with significant long-term complications related to in-stent restenosis. A growing body of literature demonstrates the feasibility of biodegradable materials for endovascular stents, which may, in theory, circumvent many of the immunologic and inflammatory response issues seen with long-term metallic stent failure in coronary and peripheral applications. This review describes the history of endovascular stents and the challenges encountered with metallic, drug-eluting, and biodegradable stents. A review of the basic engineering principles of biodegradable stents is provided, along with a discussion of the cellular mechanisms of restenosis.

A biodegradable stent based on poly(L-lactide) and poly(4-hydroxybutyrate) for peripheral vascular application: preliminary experience in the pig

PURPOSE

To assess the technical feasibility and biocompatibility of a novel stent based on poly(L-lactide) (PLLA) and poly(4-hydroxybutyrate) (P4HB) for peripheral vascular applications.

METHODS

A polytetrafluoroethylene aortobi-iliac graft was implanted in 5 pigs through a midline abdominal incision. After transverse graft limb incision, 5 PLLA/P4HB stents and 5 metal stents (316L stainless steel) were randomly deployed at both iliac anastomotic sites with 6-mm balloon catheters. Angiography was performed to determine patency prior to sacrifice at 6 weeks. Stented segments were surgically explanted and processed for quantitative histomorphometry. Vascular injury and inflammation scores were assigned to the stented iliac segments.

RESULTS

No animals were lost during follow-up. All PLLA/P4HB stents were deployed within 2 minutes by balloon inflation to 8 bars without rupture of the stent struts or anastomotic suture. All stents were patent on postprocedural angiography. Histological analysis showed no signs of excessive recoiling or collapse. PLLA/P4HB stents demonstrated decreased residual lumen area and increased neointimal area after 6 weeks (12.27+/-0.62 and 8.40+/-1.03 mm(2), respectively) compared to 316L stents (13.54+/-0.84 and 6.90+/-1.11 mm(2), respectively) as the result of differences in stent areas (PLLA/P4HB: 4.31+/-0.15 mm(2); 316L: 2.73+/-0.29 mm(2)). Vascular injury scores showed only mild vascular trauma for all stents (PLLA/P4HB: 0.41+/-0.59; 316L: 0.32+/-0.47). Inflammatory reaction was slightly higher around PLLA/P4HB stent struts (1.39+/-0.52) compared to 316L (1.09+/-0.50).

CONCLUSION

Rapid balloon expansion of PLLA/P4HB stents is feasible without risk of strut rupture. PLLA/P4HB stents provide adequate mechanical stability after iliac anastomotic stenting in pigs. Smaller residual luminal areas in the PLLA/P4HB stents might have been caused by tissue ingrowth into the larger strut interspaces due to higher strut thickness (stent area) in this group. This limitation needs to be addressed in future work on the stent design.