Immunohistochemical profile of stromal constituents and lymphoid cells over the course of wound healing in murine model

Single dose human perinatal stem cells accelerate healing of cold-induced rat burn wound

Temporal phases of wound healing and their corresponding healing factors are essential in wound regeneration. Mesenchymal stem cells (MSCs) accelerate wound healing via their paracrine secretions by enhancing cell migration, angiogenesis, and reducing inflammation. This study evaluated the local therapeutic effect of human umbilical cord MSCs (hUCMSCs) in the healing of cold-induced burn wounds. An in vitro wound (scratch) was developed in rat skin fibroblasts. The culture was maintained in the conditioned medium (CM) which was prepared by inducing an artificial wound in hUCMSCs in a separate experiment. Treated fibroblasts were analyzed for the gene expression profile of healing mediators involved in wound closure. Findings revealed enhanced cell migration and increased levels of healing mediators in the treated fibroblasts relative to the untreated group. Cold-induced burn wounds were developed in Wistar rats, followed by a single injection of hUCMSCs. Wound healing pattern was examined based on the healing phases: hemostasis/inflammation (Days 1, 3), cell proliferation (Day 7), and remodeling (Day 14). Findings exhibited enhanced wound closure in the treated wound. Gene expression, histological, and immunohistochemical analyses further confirmed enhanced wound regeneration after hUCMSC transplantation. Temporal gene expression profile revealed that the level of corresponding cytokines was substantially increased in the treated wound as compared with the control, indicating improvement in the processes of angiogenesis and remodeling, and a substantial reduction in inflammation. Histology revealed significant collagen formation along with regenerated skin layers and appendages, whereas immunohistochemistry exhibited increased neovascularization during remodeling. Leukocyte infiltration was also suppressed in the treated group. Overall findings demonstrate that a single dose of hUCMSCs enhances wound healing in vivo, and their secreted growth factors accelerate cell migration in vitro.

UV-polymerizable methacrylated gelatin (GelMA)-based hydrogel containing tannic acids for wound healing

Gelatin-based photopolymerizable methacrylate hydrogel (GelMA) is a promising biomaterial for in situ drug delivery, while aqueous extract of Punica granatum (AEPG) peel fruit rich in gallic acid and ellagic acid is used to improve wound healing. The aim of this study was to develop and analyze the healing properties of GelMA containing AEPG, gallic acid, or ellagic acid in a rodent model. GelMA hydrogels containing 5% AEPG (GelMA-PG), 1.6% gallic acid (GelMA-GA), or 2.1% ellagic acid (GelMA-EA) were produced and their mechanical properties, enzymatic degradation, and thermogravimetric profile determined. Wound closure rates, healing histological grading, and immunohistochemical counts of myofibroblasts were assessed over time. The swelling of hydrogels varied between 50 and 90%, and GelMA exhibited a higher swelling than the other groups. The GPG samples showed higher compression and Young's moduli than GelMA, GGA, and GAE. All samples degraded around 95% in 48 h. GPG and GGA significantly accelerated wound closure, improved collagenization, increased histological grading, and hastened myofibroblast differentiation in comparison to the control, GelMA, and GEA. GelMA containing AEPG (GPG) improved wound healing, and although gallic acid is the major responsible for such biological activity, a potential synergic effect played by other polyphenols present in the extract is evident.

Himatanthus bracteatus-Composed In Situ Polymerizable Hydrogel for Wound Healing

The Himatanthus genus presents anti-inflammatory, antioxidant activities, suggesting potential wound-healing properties. This study aimed to develop and analyze the wound-healing properties of a photopolymerizable gelatin-based hydrogel (GelMA) containing an ethanolic extract of Himatanthus bracteatus in a murine model. The extract was obtained under high pressure conditions, incorporated (2%) into the GelMA (GelMA-HB), and physically characterized. The anti-inflammatory activity of the extract was assessed using a carrageenan-induced pleurisy model and the GelMA-HB scarring properties in a wound-healing assay. The extract reduced IL-1β and TNF-α levels (48.5 ± 6.7 and 64.1 ± 4.9 pg/mL) compared to the vehicle (94.4 ± 2.3 pg/mL and 106.3 ± 5.7 pg/mL; p < 0.001). GelMA-HB depicted significantly lower swelling and increased resistance to mechanical compression compared to GelMA (p < 0.05). GelMA-HB accelerated wound closure over the time course of the experiment (p < 0.05) and promoted a significantly greater peak of myofibroblast differentiation (36.1 ± 6.6 cells) and microvascular density (23.1 ± 0.7 microvessels) on day 7 in comparison to GelMA (31.9 ± 5.3 cells and 20.2 ± 0.6 microvessels) and the control (25.8 ± 4.6 cells and 17.5 ± 0.5 microvessels) (p < 0.05). In conclusion, GelMA-HB improved wound healing in rodents, probably by modulating the inflammatory response and myofibroblastic and microvascular differentiation.

Investigation of wound healing potential of photo-active curcumin-ZnO-nanoconjugates in excisional wound model

Wound healing, being a dynamic process consisting of hemostasis, inflammation, proliferation, and remodeling, involves the complicated interplay of various growth mediators and the cells associated repair system. Current wound healing therapies usually fail to completely regain skin integrity and functionality. Traditionally, curcumin is considered a potent natural wound healing agent as it possesses antibacterial, antioxidant, and anti-inflammatory properties. It is also known that zinc oxide (ZnO) nanoparticles (NPs) have photocatalytic properties, including the generation of reactive oxygen species. ZnO nanoaprticles are also Food and Drug Administration (FDA) approved as safe substances. While ZnO oxide requires illumination with ultraviolet light to become photocatalytically active, dye-sensitized ZnO can be activated by illumination with visible light. In the present study, we explored the wound healing potential of ZnO nanoparticles sensitized with curcumin (Cu+ZnO Nps) and illuminated with visible (blue) light generated by an array of high power LEDs. We studied the antibacterial effect of our conjugates by percentage reduction in bacterial growth and biofilm formation. The wound healing potential was analyzed by percentage wound contraction, biochemical parameters, and histopathological analysis of the wounded site. Additionally, angiogenesis and wound associated cytokines was evaluated by immunohistochemistry of CD31 and gene expression analysis of IL-1β, TNF-α, and MMP-9 after 16 days of post-wound treatment, respectively. Our study suggests that the therapeutic effect of Cu+ZnO NPs with LED illumination increases its wound healing potential by producing an antibacterial and anti-inflammatory effect. Moreover, the treatment strategy of using a nano formulation in combination with LED illumination further increases its efficacy. It was concluded that the anti-inflammatory and bactericidal effects of the LED illuminated Cu+ZnO Np showed accelerated wound healing with increased wound contraction, collagen deposition, angiogenesis, and re-epithelialization.

Safety and Biocompatibility of Mupirocin Nanoparticle-Loaded Hydrogel on Burn Wound in Rat Model

Mupirocin nanoparticle-loaded hydrogel (MLH) was successfully developed. This study focused on the safety of cell lines and the biocompatibility of MLH for wound healing in rat models. MLH was assessed by an analysis of cytotoxicity and the secretion of inflammatory cytokines in cell lines. The cytocompatibility of MLH was compared with mupirocin ointment on full-thickness burn wounds in rats. The results indicated that MLH and blank hydrogel had no toxicity to human epidermal keratinocytes and human fibroblast cells. MLH inhibited lipopolysaccharide (LPS) activity in macrophage-like cells resulting in low nitric oxide production and reduced inflammatory cytokine production (interleukin (IL)-1β) compared with a positive control (LPS only). In burn wounds, MLH and hydrogel healed the wound better than the other groups determined by wound contraction, reduced secretion, and the generation of new blood vessels, as well as promotion of hair follicle cells. Better granulation tissue proliferation, less necrosis, and a lower degree of inflammation were found in the MLH and blank hydrogel than in the mupirocin ointment. The hydrogel group reduced the macrophages (CD68) on day 14 at the edge of the wound. On day 28, T cells (CD3), B cells (CD20), and CD68+ cells were concentrated in the deeper subcutaneous tissue. Additionally, the transforming growth factor β1 (TGF-β1) concentration and matrix prometalloproteinase-2/tissue inhibitor of metalloproteinases-2 ratio in the MLH and hydrogel groups were less than those in the other groups. The MLH formulation was safe and effective in burn wound healing. Therefore, MLH formulations are promising candidates for further evaluation in clinical trials.

Fabrication of In Situ Layered Hydrogel Scaffold for the Co-delivery of PGDF-BB/Chlorhexidine to Regulate Proinflammatory Cytokines, Growth Factors, and MMP-9 in a Diabetic Skin Defect Albino Rat Model

Diabetes mellitus (DM)-associated impairments in wound healing include prolonged inflammation, the overexpression of matrix metalloproteases (MMPs), and low levels of growth factors at the wound site. To this end, a layer-by-layer scaffold (S_L-B-L) made of cross-linked silk fibroin and hyaluronic acid is developed to deliver chlorhexidine, an antimicrobial agent and an MMP-9 inhibitor, along with the PDGF-BB protein. S_L-B-L exhibited highly porous morphology. Diabetic rats treated with S_L-B-L demonstrated an early wound closure, a fully reconstructed epithelial layer by 14 days, and reduced levels of IL-6, TNF-α, TGF-β1, and MMP-9. Interestingly, S_L-B-L treatment increased angiogenesis, the bioavailability of collagen, DNA content, and VEGF-A levels. Furthermore, enhanced keratinocyte-fibroblast interaction along with ordered collagen deposition was observed in S_L-B-L-treated rats. Most interestingly, when compared with a clinically used scaffold SEESKIN+, S_L-B-L outperformed in promoting wound healing in a diabetic rat model by regulating the inflammation while delivering growth factor and the MMP-9 inhibitor.

Indentation Stiffness Measurement by an Optical Coherence Tomography-Based Air-Jet Indentation System Can Reflect Type I Collagen Abundance and Organisation in Diabetic Wounds

There is a lack of quantitative and non-invasive clinical biomechanical assessment tools for diabetic foot ulcers. Our previous study reported that the indentation stiffness measured by an optical coherence tomography-based air-jet indentation system in a non-contact and non-invasive manner may reflect the tensile properties of diabetic wounds. As the tensile properties are known to be contributed by type I collagen, this study was aimed to establish the correlations between the indentation stiffness, and type I collagen abundance and organisation, in order to further justify and characterise the in vivo indentation stiffness measurement in diabetic wounds. In a male streptozotocin-induced diabetic rat model, indentation stiffness, and type I collagen abundance and organisation of excisional wounds were quantified and examined using the optical coherence tomography-based air-jet indentation system and picrosirius red polarised light microscopy, respectively, on post-wounding days 3, 5, 7, 10, 14, and 21. The results showed significant negative correlations between indentation stiffness at the wound centre, and the collagen abundance and organisation. The correlations between the indentation stiffness, as well as collagen abundance and organisation of diabetic wounds suggest that the optical coherence tomography-based air-jet indentation system can potentially be used to quantitatively and non-invasively monitor diabetic wound healing in clinical settings, clinical research or preclinical research.

Graphene oxide crosslinked-zein nanofibrous scaffolds for prominent Cu-adsorption as tissue regeneration promoters in diabetic rats: Nanofibers optimization and in vivo assessment

Diabetic ulcers are prone to bacterial contamination and can severely affect patient's quality of life. This study is first report to explore copper-grafted graphene oxide-crosslinked zein scaffolds (Cu-GZS) for promoting cutaneous excision wounds healing as a promising therapeutic modality in diabetic male-rats. Cu-GZS scaffolds were fabricated using electrospinning technique, where GO was employed as an echo-friendly crosslinker to meliorate mechanical stability and swellability of scaffolds. To circumvent risk of infection, copper ions were grafted into GZS as bactericidal agents and angiogenesis promoters, through soaking GZS nanofibers into Cu-solution or direct loading during electrospinning process. SEM images showed GO encapsulation by wrapping around/or trapping within nanofibrous. Interestingly, formation of chemical amide bond between zein and GO was proven by FTIR spectra. Crosslinking of zein nanofibers with GO increased tensile strength of nanofibrous by 3-folds compared to uncrosslinked zein nanofibers. Optimized Cu-GZS exhibited constant release rate of copper over a period of 8 days (~53.42%). Cu-GZS immensely accelerated wound closure demonstrated by diminished infiltration of leukocytes, absence of α-SMA positive cells, presence of fully intact epithelium with normal keratinization and accelerated wound size reduction, compared to control. Cu-GZS scaffolds could serve as promising biomaterials for effective topical wound healing in diabetic rats.

Development of Bioinspired Gelatin and Gelatin/Chitosan Bilayer Hydrofilms for Wound Healing

In the current study, we developed a novel gelatin-based bilayer wound dressing. We used different crosslinking agents to confer unique properties to each layer, obtaining a bioinspired multifunctional hydrofilm suitable for wound healing. First, we produced a resistant and non-degradable upper layer by lactose-mediated crosslinking of gelatin, which provided mechanical support and protection to overall design. For the lower layer, we crosslinked gelatin with citric acid, resulting in a porous matrix with a great swelling ability. In addition, we incorporated chitosan into the lower layer to harness its wound healing ability. FTIR and SEM analyses showed that lactose addition changed the secondary structure of gelatin, leading to a more compact and smoother structure than that obtained with citric acid. The hydrofilm was able to swell 384.2 ± 57.2% of its dry weight while maintaining mechanical integrity. Besides, its water vapour transmission rate was in the range of commercial dressings (1381.5 ± 108.6 g/m2·day). In vitro, cytotoxicity assays revealed excellent biocompatibility. Finally, the hydrofilm was analysed through an ex vivo wound healing assay in human skin. It achieved similar results to the control in terms of biocompatibility and wound healing, showing suitable characteristics to be used as a wound dressing.