Peel bond strength of resilient liner modified by the addition of antimicrobial agents to denture base acrylic resin

Bond Strength of Nanocomposite Hard Liner to CAD-CAM Milled, 3D Printed, and Conventionally Fabricated Denture Base Resins

BACKGROUND

To investigate the effect of zirconium dioxide nanoparticles (ZrO2NPs) on the shear bond strength (SBS) of hard denture lines bonded to different denture base resins.

METHODS

Five different denture bases were used in this study: conventional heat-cured resin, IvoCad, AvaDent, NextDent, and FormLabs, in acrylic specimens of 10 × 10 × 2.5 mm3 (N = 150, n = 10). Specimens were centered at the bottom of a silicon mold to create an auto-polymerized holder. Three major groups of reline material were used: no ZrO2NPs (control), 2 wt.%, and 4 wt.% ZrO2NPs. Reline was bonded to the resin surface using a customized jig. After polymerization, specimens were stored in distilled water, and 5000 thermal cycles were performed. Each specimen was fixed to an Instron machine, and SBS was tested using a blade loaded (1 mm/min) at the resin interface until failure. Data was collected and analyzed using two-way ANOVA and post hoc Tukey test (α = 0.05).

RESULTS

AvaDent showed the highest SBS when compared with other denture base materials (p < 0.001) except for IvoCad. The addition of ZrO2NPs significantly decreased the SBS of AvaDent (p = 0.003) and IvoCad (p = 0.001), while heat polymerized resin, Formlabs, and NextDent showed no significant change in SBS (p > 0.05).

CONCLUSION

CAD-CAM milled denture base resin showed higher SBS with pure denture reline. The addition of ZrO2NPs decreased the SBS of reline with CAD-CAM milled denture base resins but did not change bond strength with 3D printed and conventional denture base resins.

Resilient liner modified by antimicrobials for denture stomatitis treatment: A randomized controlled trial

OBJECTIVES

This randomized clinical trial evaluated the effectiveness of an interim denture resilient liner (Trusoft) modified with minimum inhibitory concentrations (MICs) of antimicrobial agents for Candida albicans biofilm in the denture stomatitis (DS) treatment.

METHODS

Forty participants with DS and maxillary complete denture (MCD) wearers were randomly assigned to one of the treatments for 14 days (n=10): nystatin oral suspension (Control-100,000IU/mL; 4 × /day), MCD relined with Trusoft either without (Tru) or with nystatin (Ny) or chlorhexidine diacetate (Chx) at MICs. Cytological smears and mycological quantitative cultures were taken from the palate and denture before treatment (baseline), at the end of treatment (day 14), and at follow-up (days 30, 45, and 60). Photographs of the palate were made at each visit. Data were analyzed by the Cochran and χ² tests, ANOVA and the Tukey test or the Friedman and Kruskal-Wallis tests (α=0.05).

RESULTS

Palatal smears of the Ny and Chx groups exhibited no mycelial Candida (0%) on day 14, and, at the 60-day follow-up, it was observed for only 1 participant from Chx group. MCD smears showed reduction in mycelial forms for all groups on day 14 (P<0.05), but this difference was maintained at follow-up only for the relined dentures (P<0.05). Unlike Tru and the control groups, Ny and Chx groups evidenced a significant reduction in CFU/mL values and DS severity throughout the trial (P<0.05).

CONCLUSIONS

The addition of nystatin and chlorhexidine at MICs to an interim resilient liner is a promising treatment for DS, with better results than those for conventional therapy with nystatin suspension, including the follow-ups.

CLINICAL SIGNIFICANCE

Compared with conventional topical antifungal therapy, modifying a denture reline material with antimicrobials provided a therapeutic option for denture stomatitis. This non-invasive, straightforward therapeutic approach can be easily adopted by dentists and has the advantage of not requiring patient compliance while maintaining therapeutic concentrations on the denture base.

Antifungal Activities and Some Surface Characteristics of Denture Soft Liners Containing Silicon Dioxide Nanoparticles

Objective

This study aimed at determining the influence of adding silicon dioxide nanoparticles (nano-SiO₂) to soft relining materials on C. albicans adhesion, surface roughness, and contact angle.

Materials and Methods

Eighty heat-polymerized acrylic resin disks were constructed and relined by using auto-polymerized acrylic soft liners (COE-SOFT, GC Co., Tokyo, Japan). The specimens were categorized into two groups according to the tests conducted. Group A was composed of 40 specimens for evaluating antifungal activity, and Group B was composed of 40 specimens for testing surface roughness and contact angle. Each group was subcategorized into four subgroups (n = 10) according to the concentration of nano-SiO₂ added to the soft-liner powder: control, 0.25%, 0.5%, and 1.0% by weight. The colony forming unit (CFU) was used to assess C. albicans count. A profilometer was used to measure the surface roughness values (Ra; μm). The sessile drop method was used to evaluate the contact angle (^o) by using a goniometer. Analysis of variance and Tukey's post hoc tests (α = 0.05) were used for the data analysis.

Results

In comparison with the unmodified group, the 0.25% and the 0.5% nano-SiO₂ groups exhibited significantly lower C. albicans counts (P < 0.001), surface roughness (P < 0.001), and contact angles (P < 0.001). The exception was the 1% group, which exhibited higher C. albicans count, surface roughness, and contact angles than lower-concentration nano-SiO₂ groups; however, these values in the 1% group were still less than their respective values in the control group.

Conclusion

The addition of 0.25% and 0.5% nano-SiO₂ to an auto-polymerized acrylic soft liner decreased C. albicans adhesion, surface roughness, and contact angle.

Therapeutic Role of Nystatin Added to Tissue Conditioners for Treating Denture-Induced Stomatitis: A Systematic Review

Denture-induced stomatitis (DIS) represents a pathological condition caused by ill-fitting dentures trauma, manifested as inflammation of the palatal tissue beneath the denture. The fungal infections are the principal contributory factors to DIS. Although the aetiology of DIS is multifactorial, the Candida albicans fungal infection remains the main cause. The objective of the present systematic review was to evaluate the latest literature on the addition of nystatin into the tissue conditioners (TCs) in the management of DIS. To search the published literature about “the addition of nystatin in TCs for treating DIS”, electronic databases (PubMed (National library of medicine) and Cochrane Library (Wiley)) were searched (from 1975 until December 2020) using different keywords. Various studies described the effectiveness and efficacy of incorporating nystatin into several TCs. The present systematic review reported that the addition of nystatin is beneficial, with slight or no consequences on both the mechanical and physical features of TCs. Adding nystatin to various TCs for treating DIS can be suggested.

Reduction of Candida albicans biofilm formation by coating polymethyl methacrylate denture bases with a photopolymerized film

STATEMENT OF PROBLEM

As Candida albicans biofilm formation is associated with severe local and systemic infections in denture-wearing patients, its prevention or reduction becomes an essential factor in the health of this population.

PURPOSE

The purpose of this in vitro study was to investigate whether 2 photopolymerized coatings of poly(acrylic acid) (PAA) and poly(itaconic acid) (PIA) can effectively reduce the adhesion of C albicans on denture base acrylic resin surfaces.

MATERIAL AND METHODS

The surface of the polymethyl methacrylate (PMMA) denture base was modified through photopolymerization of a thin film of PAA or PIA. The polymeric coatings were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), contact angle goniometry (CA), and surface roughness measurement (Ra). For biological evaluation, the coated PMMA surfaces were tested in a C albicans biofilm dynamic formation model, observed by confocal laser scanning microscopy (CLSM), and quantified by the number of colony-forming units (CFUs). The cytotoxicity of the polymeric coatings was also evaluated by using a lactic dehydrogenase-based (LDH) test. For statistical analysis, ANOVA and the nonparametric Kruskal-Wallis test were used (α=.05).

RESULTS

The PMMA resin base surfaces coated with PAA and PIA had an inhibitory effect on C albicans growth, the wettability of the coated surface, and the average roughness. The PAA and PIA coatings had no statistically significant cytotoxic effect on periodontal ligament fibroblasts.

CONCLUSIONS

PMMA acrylic resin base material was superficially modified through the incorporation of carboxylic acid groups by using PAA and PIA coatings that reduced the adherence of C albicans biofilm by 90%.

Denture Liners: A Systematic Review Relative to Adhesion and Mechanical Properties

Purpose

The objective of this systematic review is to compare results concerning the properties of adhesion, roughness, and hardness of dental liners obtained in the last ten years.

Methods

Searches on the databases LILACS, PubMed/Medline, Web of Science, and Cochrane Database of Systematic Reviews were supplemented with manual searches conducted between February and April of 2018. The inclusion criteria included experimental in vitro and in vivo, clinical, and laboratory studies on resilient and/or hard liners, assessment of hardness, roughness, and/or adhesion to the denture base, and physical/mechanical changes resulting from the disinfection process and changes in liners' composition or application.

Results

A total of 406 articles were identified and, from those, 44 are discussed. Twenty-four studies examined the bond strength, 13 surface roughness, and 19 the hardness. Of these 44 studies, 12 evaluated more than one property. Different substances were used in the attempt to improve adhesion. Considering roughness and hardness, the benefits of sealants have been tested, and the changes resulting from antimicrobial agents' incorporation have been assessed.

Conclusion

Adhesion to the prosthesis base is improved with surface treatments. Rough surfaces and changes in hardness compromise the material's serviceability.

Peel bond strength and antifungal activity of two soft denture lining materials incorporated with 1% chlorhexidine diacetate

Two soft denture lining materials (SC-Soft Confort and TS-Trusoft) were investigated with and without the addition of 1.0% of chlorhexidine diacetate (1.0% CHX). To assess peel bond strength, specimens (75×10×6 mm) were submitted to a peel test at 10 mm/min immediately and after 24 h. To evaluate Candida albicans growth inhibition, disc of specimens (10×3 mm) were immersed in a solution with 3×10⁶ CFU/mL of C. albicans, and spectral measurements were made following immersion in MTT solution for 2, 4, and 6 days. The agar diffusion test was performed by investigating the diameters of inhibition zones around the disc of specimens (10×3 mm)after 48 h. Data were submitted to statistical analysis (α=0.05) and the failure modes were visually classified. The incorporation of 1.0% CHX significantly decreased the peel bond strength for TS (p=0.001) and SC (p=0.005) for immediate test and for TS after 24 h (p=0.010), but not for SC. C. albicans growth was decreased for both materials over time (p<0.05). SC presented inhibition zones approximately 2.0 times larger than TS. The incorporation of 1.0% CHX inhibited fungal growth without impairment to the peel bond strength for SC after 24 h.

In vivo biocompatibility of an interim denture resilient liner containing antifungal drugs

STATEMENT OF PROBLEM

Antifungal agents incorporated into interim denture resilient liners have been suggested as an adjunct treatment for denture stomatitis (DS). However, before applying this protocol to humans, biocompatibility analysis of such drugs in animal models is required.

PURPOSE

The purpose of this animal study was to evaluate the in vivo biocompatibility of an interim resilient liner modified with minimum inhibitory concentrations (MICs) of antifungal drugs for Candida albicans biofilm.

MATERIAL AND METHODS

Sixty Wistar rats were divided into 6 groups (n=5): PC=positive control/no protocol; IOD (intraoral device)=rats using an acrylic resin palatal device (PD); Tru=rats using a PD relined with Trusoft; and Ny (nystatin), Chx (chlorhexidine diacetate), and Ke (ketoconazole) groups=rats using a PD relined with Trusoft + drug MICs. The rats were sacrificed at 7 or 14 days of trial. Histopathological qualitative analysis was performed by comparing photomicrographs of histological sections of the intermolar region. Morphological changes in the epithelium and keratin were quantitatively analyzed by computerized planimetry, and data were analyzed by using 2-way ANOVA and the Tukey HSD test (α=.05).

RESULTS

Quantitative analysis showed that only PD containing Ke significantly decreased the thickness and area of the keratin compared with the other groups (P<.001), which showed no differences between each other (P>.05). These results agreed with those of qualitative analysis.

CONCLUSIONS

Incorporation of MICs of Ny and Chx in Trusoft did not induce histopathological changes in the rat palatal mucosa, suggesting the in vivo biocompatibility of this DS treatment.

Porosity of temporary denture soft liners containing antifungal agents

Incorporation of antifungals in temporary denture soft liners has been recommended for denture stomatitis treatment; however, it may affect their properties.

Role of antifungal medicaments added to tissue conditioners: A systematic review

PURPOSE

The aim of this review is to investigate the current state of knowledge on the incorporation of antifungal agents into the tissue conditioners for the treatment of denture induced stomatitis.

STUDY SELECTION

Studies reporting the incorporation of antifungal/antimicrobial agents in to tissue conditioners were included in the review. In order to search the studies on the topic "incorporation of antifungal agents in tissue conditioners for the treatment of denture induced stomatitis" ISI web of science, PubMed/MEDLINE, and Google-Scholar databases were searched from 1970 up to and including July 2015 using various keywords such as antifungal agents, tissue conditioners, Candida albicans, denture stomatitis, etc.

RESULTS

Various studies reported the efficacy and effectiveness of adding conventional organic antifungal medicines (nystatin, azole group derivatives and chlorhexidine, antimicrobials/antifungals other than organic (silver zeolite, silver nano-particles, photo-catalysts and metallic oxides) and natural and herbal antimicrobials (tea tree oil, lemongrass essential oil and origanum oil) into various tissue conditioners. The review literature reported that incorporation of antifungal agents into tissue conditioners is effective with minimal or no effects on physical and mechanical properties of tissue conditioners.

CONCLUSIONS

Incorporation of different antifungal medicaments to commercially available tissue conditioners can be recommended for the management of denture induced stomatitis.

Peel bond strength of soft lining materials with antifungal to a denture base acrylic resin

The effect of the addition of nystatin, miconazole, ketoconazole, chlorhexidine, and itraconazole into the soft lining materials Softone and Trusoft on their peel bond strength to a denture base acrylic resin was evaluated. Specimens of soft lining materials (n=7) were made without (control) or with the incorporation of antifungals at their minimum inhibitory concentrations to the biofilm of C. albicans and bonded to the acrylic resin. Peel testing was performed after immersion in distilled water at 37ºC for 24 h, 7 and 14 days. Data (MPa) were analyzed by 3-way ANOVA/Tukey-Kramer test (α=0.05) and the failure modes were classified. The addition of nystatin and ketoconazole did not affect the peel bond strength for up to 14 days. Most failures were predominantly cohesive within soft lining materials. With the exception of itraconazole, incorporating the antifungals into the soft lining materials did not result in values below those recommended for peel bond strength after 7 and 14 days of analysis.

Evaluation of antibiofilm and mechanical properties of new nanocomposites based on acrylic resins and silver vanadate nanoparticles

OBJECTIVE

The purpose of this study was evaluate, for the first time, the impact of incorporation of nanostructured silver vanadate (β-AgVO3) in antibiofilm and mechanical properties of dental acrylic resins (poly(methyl methacrylate), PMMA).

DESIGN

The β-AgVO3 was synthesized and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy, and microanalysis (SEM/EDS). Resins specimens were prepared with 0-10% wt.% β-AgVO3 and characterized by SEM, XRD and optical microscopy. The antibiofim activity of the samples against Candida albicans and Streptococcus mutans was investigated by XTT reduction test, colony-forming units (CFUs), and confocal laser scanning microscopy (CLSM). The flexural strength, hardness, and surface roughness of the samples containing β-AgVO3 were compared with the pure PMMA matrix.

RESULTS

The incorporation of 10% β-AgVO3 significantly reduced the metabolic activity of C. albicans and S. mutans (p<0.05). There was a reduction in microbial load (CFU/mL) of microorganisms for the different concentrations used (p<0.05), which was confirmed by confocal microscopy. The addition of β-AgVO3 did not change the mechanical properties of hardness and surface roughness of the resins (p>0.05). However, flexural strength decreased with the addition of amounts greater than 1% (p<0.05).

CONCLUSIONS

β-AgVO3 additions in dental acrylic resin may have an impact on inhibition of biofilm of main microorganisms associated with dental prostheses. However, the viability of clinical use should be evaluated in function of changed promoted in some mechanical properties.

In vitro study of the antibacterial properties and impact strength of dental acrylic resins modified with a nanomaterial

STATEMENT OF PROBLEM

The accumulation of bacteria on the surface of dental prostheses can lead to systemic disease.

PURPOSE

The purpose of this in vitro study was to evaluate the growth of Staphylococcus aureus and Pseudomonas aeruginosa on the surface of autopolymerizing (AP) and heat-polymerizing (HP) acrylic resins incorporated with nanostructured silver vanadate (β-AgVO3) and its impact strength.

MATERIAL AND METHODS

For each resin, 216 circular specimens (9 × 2 mm) were prepared for microbiologic analysis and 60 rectangular specimens (65 × 10 × 3.3 mm) for mechanical analysis, according to the percentage of β-AgVO3: 0%, control group; 0.5%; 1%; 2.5%; 5%; and 10%. After a biofilm had formed, the metabolic activity of the bacteria was measured using the XTT reduction assay (2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide) (n=8), and the number of viable cells was determined by counting colony forming units per milliliter (CFU/mL) (n=8). Confocal laser scanning microscopy (CLSM) was used to complement the analyses (n=2). The mechanical behavior was evaluated by impact strength assays (n=10). Data were analyzed by 2-way ANOVA, followed by the Tukey honestly significant difference (HSD) post hoc test (α=.05).

RESULTS

The addition of 5% and 10% β-AgVO3 significantly decreased the metabolic activity of P. aeruginosa for both resins (P<.05). The HP resin promoted a greater reduction in metabolic activity than the AP resin (P<.05). No difference was found in the metabolic activity of S. aureus according to the XTT (P>.05). The number of CFU/mL for S. aureus and P. aeruginosa decreased significantly when 5% and 10% β-AgVO3 were added (P<.001). These concentrations significantly reduced the impact strength of the resins (P<.001) because the system was weakened by the presence of clusters of β-AgVO3.

CONCLUSION

The addition of β-AgVO3 can provide acrylic resins with antibacterial activity but reduces their impact strength. More efficient addition methods should be investigated.

Antimicrobial activity of a tissue conditioner combined with a biocide polymer

BACKGROUND

The characteristics of tissue conditioners support microorganism development that can threaten the health of the dentures user.

PURPOSE

The object of this study was to evaluate the effect on antimicrobial activity, roughness and wettability surface of a tissue conditioners material combined with the antimicrobial polymer poly (2-tert-butilaminoethyl) methacrylate (PTBAEMA).

MATERIALS AND METHODS

Specimens of tissue conditioner (Coe Soft(®)) were divided into three groups, according to the concentration of PTBAEMA incorporated (0, 10 and 25%). Antimicrobial activity was assessed by adherence assay of one of the microorganisms, Staphylococcus aureus, Streptococcus mutans and Candida albicans. Roughness measurements were made using a Mitutoyo SJ-400, and the mean arithmetic roughness values (Ra) obtained were used for the comparisons. The wettability properties were determined by contact angle measurements.

RESULTS

The group containing 25% of PTBAEMA inhibited totally the S. aureus and S. mutans biofilm formation. A significant reduc tion in the S. aureus (Kruskal-Wallis, p = 0,001) and S. mutans (Kruscal-Wallis, p = 0,001) count for 10% PTBAEMA group compared with respective control group. No significant difference was found for C. albicans among PTBAEMA groups and control group (ANOVA, p > 0,05). Incorporating 10 and 25% PTBAEMA increased surface roughness and decreased contact angles (ANOVA and Tukey's post hoc tests, α = 5%).

CONCLUSION

Incorporating 10% PTBAEMA into tissue conditioner increases wettability and roughness of tissue conditioner surface; and decreases the adhesion of S. mutans and S. aureus on material surface, but did not exhibit antimicrobial effect against C. albicans.

SIGNIFICANCE

The PTBAEMA incorporated into tissue conditioner could prevent biofilm formation on elderly patient.

Effect of composition of experimental fluorinated soft lining materials on bond strength to denture base resin

The purpose of the present study was to investigate the effect of the composition of experimental fluorinated soft lining materials on bond strength to denture base resin. Vinylidene fluoride/hexafluoro propylene copolymer (2-6F), tridecafluorooctyl methacrylate (13FMA), methoxy diethylene glycol methacrylate (MDGMA), and silica (as filler) were used for fabrication of the experimental soft lining materials. Nine experimental soft lining materials having various compositions of 2-6F, 13FMA, and MDGMA were prepared. Shear and tensile bond strength tests were performed before and after immersion in water. The water sorption for the materials was also measured. An increase in the content of acrylic monomer, MDGMA, in the experimental materials increased the bond strength before immersion in water but reduced the bond strength after immersion in water as compared to that before immersion in water. The inclusion of fluorinated monomer (13FMA) in the materials appeared to affect water sorption.

Effect of the addition of antimicrobial agents on Shore A hardness and roughness of soft lining materials

PURPOSE

While the incorporation of antimicrobial agents into soft denture liners has been suggested as a reliable alternative treatment for denture stomatitis, it may affect the liner's properties. The effect of addition of antimicrobial agents for the treatment of denture stomatitis on the surface roughness and Shore A hardness of soft lining materials was evaluated.

MATERIALS AND METHODS

The test groups comprised specimens (36 × 7 × 6 mm(3) ) of soft materials (Softone and Trusoft) without (control) or with incorporation of drugs (nystatin, miconazole, ketoconazole, chlorhexidine diacetate, and itraconazole). Hardness (Shore A) and roughness (Ra) were evaluated after immersion of specimens (n = 10) in distilled water at 37°C for 24 hours, 7 and 14 days. Data were analyzed by 3-way ANOVA/Tukey's test (α = 0.05).

RESULTS

After 14 days, an increase (p < 0.05) was observed in the hardness of soft materials with time for the modified specimens, except for itraconazole. Addition of drugs increased the Softone roughness only for the addition of miconazole and chlorhexidine (p < 0.05), and did not increase the roughness of Trusoft with time. Only chlorhexidine and itraconazole altered the roughness compared to the control for each material (p < 0.05).

CONCLUSIONS

The smallest changes of hardness and roughness with time in the modified groups compared to controls were observed for itraconazole groups for both materials.

Effect of antimicrobial agents incorporated into resilient denture relines on the Candida albicans biofilm

OBJECTIVE

The antimicrobial action of five drugs incorporated in temporary denture relines on the fungal biofilm was evaluated.

MATERIALS AND METHODS

A Candida albicans biofilm (SC5314) was formed on specimens (10 × 1 mm) of materials (Trusoft and Softone) modified or not (control) by the drugs (nystatin, miconazole, ketoconazole, itraconazole, and chlorhexidine diacetate). Cell viability was determined spectrophotometrically by the tetrazolium salt reduction assay (XTT) after 24 h, 48 h, and 7 and 14 days of incubation. The minimum inhibitory concentrations (MICs) were those which inhibited 90% or more of fungal growth. Fungal susceptibility was confirmed by confocal laser scanning microscopy analysis.

RESULTS

The MICs of drugs incorporated in the materials were 0.032, 0.256, 0.128, 0.256, and 0.064 g ml(-1) for nystatin, miconazole, ketoconazole, itraconazole, and chlorhexidine, respectively. Images from nystatin, chlorhexidine, and ketoconazole demonstrated no viable cells.

CONCLUSIONS

The antimicrobials incorporated in the resilient materials inhibited fungal growth during 14 days, with lower MICs for nystatin and chlorhexidine.