Elimination of Methylene Blue and Reactive Black 5 from Aqueous Solution Using HKUST-1

Comprehensive evaluation of HKUST-1 as an efficient adsorbent for textile dyes

This study aimed to comprehensively assess the performance of HKUST-1, a metal-organic framework (MOF), as an adsorbent for various classes of textile dyes, including direct, acid, basic, and vinyl sulfonic reactive dyes. Real-world dyeing scenarios were simulated using carefully selected combinations of dyes to evaluate HKUST-1's effectiveness in treating dyeing process effluents. The results demonstrated that HKUST-1 exhibited highly efficient adsorption capabilities across all dye classes. Isolated direct dyes showed the best adsorption outcomes, with adsorption percentages exceeding 75% and reaching 100% for direct blue dye (Sirius Blue K-CFN). Basic dyes exhibited adsorption levels of nearly 85% for blue dye (Astrazon Blue FG), while the adsorption performance for the yellow dye (Yellow GL-E) was the poorest. The adsorption of dyes in combined systems followed a similar trend to that of isolated dyes, with the trichromy of direct dyes yielding the best results. Kinetic studies indicated that the adsorption of dyes followed a pseudo-second-order model, with nearly instantaneous adsorption observed in all cases. Furthermore, most dyes adhered to the Langmuir isotherm, further confirming the effectiveness of the adsorption process. The exothermic nature of the adsorption process was evident. Importantly, the study demonstrated the feasibility of reusing the HKUST-1, highlighting its potential as an exceptional adsorbent for removing hazardous textile dyes from effluents.

Recent advances in application of metal-organic frameworks (MOFs) as adsorbent and catalyst in removal of persistent organic pollutants (POPs)

The presence of persistent organic pollutants (POPs) in the aquatic environment is causing widespread concern due to their bioaccumulation, toxicity, and possible environmental risk. These contaminants are produced daily in large quantities and released into water bodies. Traditional wastewater treatment plants are ineffective at degrading these pollutants. As a result, the development of long-term and effective POP removal techniques is critical. In water, adsorption removal and photocatalytic degradation of POPs have been identified as energy and cost-efficient solutions. Both technologies have received a lot of attention for their efforts to treat the world's wastewater. Photocatalytic removal of POPs is a promising, effective, and long-lasting method, while adsorption removal of persistent POPs represents a simple, practical method, particularly in decentralized systems and isolated areas. It is critical to develop new adsorbents/photocatalysts with the desired structure, tunable chemistry, and maximum adsorption sites for highly efficient removal of POPs. As a class of recently created multifunctional porous materials, Metal-organic frameworks (MOFs) offer tremendous prospects in adsorptive removal and photocatalytic degradation of POPs for water remediation. This review defines POPs and discusses current research on adsorptive and photocatalytic POP removal using emerging MOFs for each type of POPs.

Synthesis of Copper(II) Trimesinate Coordination Polymer and Its Use as a Sorbent for Organic Dyes and a Precursor for Nanostructured Material

Several important synthesis pathways for metal-organic frameworks (MOFs) were applied to determine how the synthesis methods and conditions affect the structure and adsorption capacity of the resulting samples. In the present work, three different synthesis routes were used to obtain copper trimesinate coordination polymer: Slow evaporation (A), solvothermal synthesis using a polyethylene glycol (PEG-1500) modulator (B), and green synthesis in water (C). This MOF was characterized by elemental analysis, infrared spectrometry, X-ray diffraction, scanning electron microscopy, thermogravimetry and volumetric nitrogen adsorption/desorption. The samples have permanent porosity and a microporous structure with a large surface area corresponding to the adsorption type I. The obtained MOF was tested as a sorbent to remove organic dyes methylene blue (МВ), Congo red (CR) and methyl violet (MV) as examples. Dye adsorption followed pseudo-first-order kinetics. The equilibrium data were fitted to the Langmuir and Freundlich isotherm models, and the isotherm constants were determined. Thermodynamic parameters, such as changes in the free energy of adsorption (ΔG0), enthalpy (ΔH0), and entropy (ΔS0), were calculated. Thermolysis of copper trimesinate leads to the formation of carbon materials Cu@C with a high purity.

Leveraging Nanocrystal HKUST-1 in Mixed-Matrix Membranes for Ethylene/Ethane Separation

The energy-intensive ethylene/ethane separation process is a key challenge to the petrochemical industry. HKUST-1, a metal–organic framework (MOF) which possesses high accessible surface area and porosity, is utilized in mixed-matrix membrane fabrication to investigate its potential for improving the performance for C₂H₄/C₂H₆ separation. Prior to membrane fabrication and gas permeation analysis, nanocrystal HKUST-1 was first synthesized. This step is critical in order to ensure that defect-free mixed-matrix membranes can be formed. Then, polyimide-based polymers, ODPA-TMPDA and 6FDA-TMPDA, were chosen as the matrices. Our findings revealed that 20 wt% loading of HKUST-1 was capable of improving C₂H₄ permeability (155% for ODPA-TMPDA and 69% for 6FDA-TMPDA) without excessively sacrificing the C₂H₄/C₂H₆ selectivity. The C₂H₄ and C₂H₆ diffusivity, as well as solubility, were also improved substantially as compared to the pure polymeric membranes. Overall, our results edge near the upper bound, confirming the effectiveness of leveraging nanocrystal HKUST-1 filler for performance enhancements in mixed-matrix membranes for C₂H₄/C₂H₆ separation.

Synthesis of Mesoporous MWCNT/HKUST-1 Composite for Wastewater Treatment

Metal–organic frameworks (MOFs) (Hong Kong University of Science and Technology (HKUST)-1) have been widely studied using the hydrothermal method. Recently, efforts have also been geared toward the incorporation of multiwalled carbon nanotubes (MWCNTs) into the HKUST-1 MOF to advance its applications for gas storage as well as pollutant removal in wastewater. However, a significant reduction in the MWCNT/HKUST-1 composite surface area has limited its applications. We therefore synthesized HKUST-1 and HKUST-1 impregnated with acid-treated multiwalled carbon nanotubes (FMWCNTs). A large surface area of 1131.2 m2g−1 was obtained after acid treatment of the as-received MWCNTs. HKUST-1 was found to have an average particle diameter of 6.5 to 8 µm with a BET surface area of 1176.66 m2g−1. The FMWCNT/HKUST-1 composites had a BET surface area of 1108.85 m2/g. The addition of FMWCNTs was found to increase the parent MOF pore volume from 0.76 to 1.93 cm3g−1. A BJH desorption cumulative pore size of 6.97 nm was obtained in a composite sample. The maximum adsorption capacity of the composites was found to be greater than 100 mg/g at 298 K. The results obtained indicate that FMWCNT/HKUST-1 nanocomposites are a potential adsorbent for methylene blue (MB) removal in dye synthetic water.