Effects of Recombinant Human Bone Morphogenetic Protein-2 on Vertical Bone Augmentation in a Canine Model

Resorbable Membranes for Guided Bone Regeneration: Critical Features, Potentials, and Limitations

Lack of horizontal and vertical bone at the site of an implant can lead to significant clinical problems that need to be addressed before implant treatment can take place. Guided bone regeneration (GBR) is a commonly used surgical procedure that employs a barrier membrane to encourage the growth of new bone tissue in areas where bone has been lost due to injury or disease. It is a promising approach to achieve desired repair in bone tissue and is widely accepted and used in approximately 40% of patients with bone defects. In this Review, we provide a comprehensive examination of recent advances in resorbable membranes for GBR including natural materials such as chitosan, collagen, silk fibroin, along with synthetic materials such as polyglycolic acid (PGA), polycaprolactone (PCL), polyethylene glycol (PEG), and their copolymers. In addition, the properties of these materials including foreign body reaction, mechanical stability, antibacterial property, and growth factor delivery performance will be compared and discussed. Finally, future directions for resorbable membrane development and potential clinical applications will be highlighted.

Oral hard tissue defect models for evaluating the regenerative efficacy of implant materials

Oral hard tissue defects are common concomitant symptoms of oral diseases, which have poor prognosis and often exert detrimental effects on the physical and mental health of patients. Implant materials can accelerate the regeneration of oral hard tissue defects (such as periodontal defects, alveolar bone defects, maxilla bone defects, mandible bone defects, alveolar ridge expansion, and site preservation), but their regenerative efficacy and biocompatibility need to be preclinically validated in vivo with animal‐based oral hard tissue defect models. The choice of oral hard tissue defect model depends on the regenerative effect and intended application of the tested implant material. At the same time, factors that need to be considered include techniques for constructing the particular defect model, the scaffold/graft material used, the availability of animal model evaluation techniques and instrumentation, as well as costs and time constraints. In this article, we summarize the common oral hard tissue defect models in various animal species (such as periodontal model, jaw defect model, and implantation defect model) that can be used to evaluate the regenerative efficacy and biocompatibility of implant materials.

Finding the Perfect Membrane: Current Knowledge on Barrier Membranes in Regenerative Procedures: A Descriptive Review

Guided tissue regeneration (GTR) and guided bone regeneration (GBR) became common procedures in the corrective phase of periodontal treatment. In order to obtain good quality tissue neo-formation, most techniques require the use of a membrane that will act as a barrier, having as a main purpose the blocking of cell invasion from the gingival epithelium and connective tissue into the newly formed bone structure. Different techniques and materials have been developed, aiming to obtain the perfect barrier membrane. The membranes can be divided according to the biodegradability of the base material into absorbable membranes and non-absorbable membranes. The use of absorbable membranes is extremely widespread due to their advantages, but in clinical situations of significant tissue loss, the use of non-absorbable membranes is often still preferred. This descriptive review presents a synthesis of the types of barrier membranes available and their characteristics, as well as future trends in the development of barrier membranes along with some allergological aspects of membrane use.

Finding the Perfect Membrane: Current Knowledge on Barrier Membranes in Regenerative Procedures: A Descriptive Review

Guided tissue regeneration (GTR) and guided bone regeneration (GBR) became common procedures in the corrective phase of periodontal treatment. In order to obtain good quality tissue neo-formation, most techniques require the use of a membrane that will act as a barrier, having as a main purpose the blocking of cell invasion from the gingival epithelium and connective tissue into the newly formed bone structure. Different techniques and materials have been developed, aiming to obtain the perfect barrier membrane. The membranes can be divided according to the biodegradability of the base material into absorbable membranes and non-absorbable membranes. The use of absorbable membranes is extremely widespread due to their advantages, but in clinical situations of significant tissue loss, the use of non-absorbable membranes is often still preferred. This descriptive review presents a synthesis of the types of barrier membranes available and their characteristics, as well as future trends in the development of barrier membranes along with some allergological aspects of membrane use.

Animal models of vertical bone augmentation (Review)

Vertical bone augmentation is an important challenge in dental implantology. Existing vertical bone augmentation techniques, along with bone grafting materials, have achieved certain clinical progress but continue to have numerous limitations. In order to evaluate the possibility of using biomaterials to develop bone substitutes, medical devices and/or new bone grafting techniques for vertical bone augmentation, it is essential to establish clinically relevant animal models to investigate their biocompatibility, mechanical properties, applicability and safety. The present review discusses recent animal experiments related to vertical bone augmentation. In addition, surgical protocols for establishing relevant preclinical models with various animal species were reviewed. The present study aims to provide guidance for selecting experimental animal models of vertical bone augmentation.

Molecular features and tissue engineering techniques applied to regenerative surgery: an overview of recent data

INTRODUCTION

Regenerative procedures have become common in the medical and dentistry rehabilitation fields. Often, tissue regeneration maneuvers are necessary to rehabilitate patients in a safe and predictable manner. The aim of this narrative review was to highlight the molecular implications during regenerative surgery.

EVIDENCE ACQUISITION

The analysis of the literature was conducted on the main scientific databases Pubmed, Scopus, MDPI.

EVIDENCE SYNTHESIS

After a screening of 66 results only 8 were included.

CONCLUSIONS

Knowing these molecular features, it is possible to highlight which are the biomaterials that offer greater potential and identify the best protocols according to the surgical needs.

In ovariectomy-induced osteoporotic rat models, BMP-2 substantially reversed an impaired alveolar bone regeneration whereas PDGF-BB failed

OBJECTIVES

We previously suggested an ovariectomy (OVX)-induced osteoporotic rat model showing an impaired alveolar bone defect healing. This study aimed to evaluate and compare the effects of recombinant human bone morphogenetic protein-2 (rhBMP-2) and recombinant human platelet-derived growth factor-BB (rhPDGF-BB) on alveolar bone defect healing in OVX-induced osteoporotic rats.

MATERIALS AND METHODS

A total of forty-one female rats were divided into four groups: a collagen group (n=10), a PDGF-BB group (n=11), a BMP-2 group (n=10), and a control group (n=10). Four months after OVX, alveolar bone drill-hole defects were created and grafted with collagen gel, rhPDGF-BB/collagen gel, or rhBMP-2/collagen gel. The defects in the control group were not grafted with any material. Defect healing was evaluated by histological, histomorphometric, and microcomputed tomographic (micro-CT) analyses at 2 and 4 weeks.

RESULTS

According to the micro-CT analysis, the BMP-2 group exhibited the greatest bone volume fraction among all groups, while the PDGF-BB group did not show significant differences compared with the collagen group. The histomorphometric analysis showed a significantly larger amount of new bone area in the BMP-2 group than in the control and collagen groups at 4 weeks; however, the PDGF-BB group did not reach significant superiority compared with the other groups.

CONCLUSIONS

Alveolar bone regeneration was significantly enhanced by the local use of rhBMP-2/collagen gel compared with the use of rhPDGF-BB/collagen gel in OVX-induced osteoporotic rats.

CLINICAL RELEVANCE

A treatment modality using rhBMP-2 may be a promising approach to promote alveolar bone regeneration in patients suffering from postmenopausal osteoporosis.

Membranes for Guided Bone Regeneration: A Road from Bench to Bedside

Bone resorption can negatively influence the osseointegration of dental implants. Barrier membranes for guided bone regeneration (GBR) are used to exclude nonosteogenic tissues from influencing the bone healing process. In addition to the existing barrier membranes available on the market, a growing variety of membranes for GBR with tailorable physicochemical properties are under preclinical evaluation. Hence, the aim of this review is to provide a comprehensive description of materials used for GBR and to report the main industrial and regulatory aspects allowing the commercialization of these medical devices (MDs). In particular, a summary of the main attributes defining a GBR membrane is reported along with a description of commercially available and under development membranes. Finally, strategies for the scaling-up of the manufacturing process and the regulatory framework of the main MD producers (USA, EU, Japan, China, and India) are presented. The description of the regulatory approval process of GBR membranes is representative of the typical path that medium- to high-risk MDs have to follow for an effective medical translation, which is of fundamental importance to increase the impact of biomedical research on public health.

Characteristic comparison between canine and human dental mesenchymal stem cells for periodontal regeneration research in preclinical animal studies

The effectiveness of stem cell-based periodontal tissue engineering need to be assessed by preclinical animal studies. Dog models are widely used animal models; however, there are not sufficient data on characterization of canine dental mesenchymal stem cells. Therefore, we aimed to compare the characteristics among canine and human periodontal ligament stem cells and canine and human dental pulp stem cells. Canine periodontal ligament stem cells and dental pulp stem cells showed significantly weaker clonogenic capability, and proliferation and migration capacity, and they displayed lower positive rates for CD90, CD73, CD105, and STRO-1. All of these canine and human cells showed multilineage differentiation potential. After osteogenic induction, the expression of alkaline phosphatase was obviously upregulated in human dental mesenchymal stem cells, but it was not upregulated in canine dental pulp stem cells. Other osteogenic genes, such as runt-related transcription factor 2 and bone morphogenetic protein 2, were upregulated in all induced canine and human cells, but their upregulation occurred later in canine cells. These results confirmed the stem cell properties of canine mesenchymal stem cells, but also suggested that more attention should be paid to the choice of appropriate research approaches, osteogenic gene markers, and time points for the utilization of canine dental mesenchymal stem cells due to their distinct characteristics.

Supplemental periodontal regeneration by vertical ridge augmentation around dental implants. A preclinical in vivo experimental study

OBJECTIVES

To evaluate the supplemental periodontal regeneration on adjacent teeth by vertical ridge augmentation around dental implants.

MATERIAL AND METHODS

The second premolar and the fourth premolar were extracted from both sides of the mandible in four beagle dogs. After 2 months, defects of 3 mm and 5 mm deep were formed. In the test group, vertical ridge augmentation was performed around a dental implant, and in the control group, vertical ridge augmentation was performed without implant placement. The animals were euthanized 3 months after the procedure, and radiographic and histomorphometric analyses were performed.

RESULTS

Overall, the test group showed better results than the control group. The presence of new cementum in the histological examination of the test group confirmed that vertical ridge augmentation with proper space maintaining could contribute to periodontal regeneration of adjacent teeth. Statistically significant difference in new bone height (%) was found in group I (5-mm defect depth and implant placement, GBR) when compared with group III (5-mm defect depth, GBR) and IV (3-mm defect depth, GBR). New bone area (%) was statistically different between groups I and IV.

CONCLUSIONS

In conclusion, within the limitation of this study using mandibular residual ridges after extraction of a single tooth in dogs, grafted space was maintained by dental implants better in the deep defect (5-mm depth) than the shallow defect (3-mm depth). Vertical ridge augmentation around dental implants also promoted neighboring periodontal regeneration.

Preclinical application of recombinant human bone morphogenetic protein 2 on bone substitutes for vertical bone augmentation: A systematic review and meta-analysis

STATEMENT OF PROBLEM

Recombinant human bone morphogenetic protein 2 (rhBMP-2) has been introduced to clinical practice because of its osteoinductive capacity. However, the evidence of its efficacy in vertical bone augmentation procedures is not clear.

PURPOSE

The purpose of this systematic review and meta-analysis was to investigate the efficacy of rhBMP-2 in vertical bone augmentation and to establish whether its addition in preclinical experiments (animal studies) would be sufficient to justify further clinical and histometric studies.

MATERIAL AND METHODS

An electronic search of 3 databases, PubMed/MEDLINE, EMBASE, and Web of Science, and a manual search of the reference list of relevant studies were performed. Only randomized controlled trials regarding animal studies comparing the efficacy of bone grafts supplemented with and without rhBMP-2 in vertical bone augmentation procedures were included and reviewed.

RESULTS

Nine studies were included. The results of the meta-analysis showed that the pooled weighted mean difference (WMD) of the percentage of newly formed bone was 9.97% (95% confidence interval [CI]=-0.79% to 20.72%; P=.070), the WMD of the percentage of residual materials was -21.31% (95% CI=-70.62% to 28.00%; P=.400), the WMD of the augmented bone height was 1.70 mm (95% CI=-0.23 to 3.63 mm; P=.080), the WMD of the augmented bone height for studies with space-providing barriers was 1.00 mm (95% CI=0.43 to 1.57 mm; P<.001), and the WMD of the percentage of regenerated tissue was 17.07% (95% CI=8.52% to 25.62%; P<.001).

CONCLUSIONS

The application of rhBMP-2 in bone substitutes did not enhance new bone formation and residual graft resorption in vertical bone augmentation procedures. Tissue regeneration and the augmented bone height were significantly improved by the additional use of BMP-2.

Dual modulation of crystallinity and macro-/microstructures of 3D printed porous titanium implants to enhance stability and osseointegration

The macro architecture and micro surface topological morphology of implants play essential roles in bone tissue regeneration.

Hyaluronic Acid/Bone Substitute Complex Implanted on Chick Embryo Chorioallantoic Membrane Induces Osteoblastic Differentiation and Angiogenesis, but not Inflammation

Microscopic and molecular events related to alveolar ridge augmentation are less known because of the lack of experimental models and limited molecular markers used to evaluate this process. We propose here the chick embryo chorioallantoic membrane (CAM) as an in vivo model to study the interaction between CAM and bone substitutes (B) combined with hyaluronic acid (BH), saline solution (BHS and BS, respectively), or both, aiming to point out the microscopic and molecular events assessed by Runt-related transcription factor 2 (RUNX 2), osteonectin (SPARC), and Bone Morphogenic Protein 4 (BMP4). The BH complex induced osteoprogenitor and osteoblastic differentiation of CAM mesenchymal cells, certified by the RUNX2 +, BMP4 +, and SPARC + phenotypes capable of bone matrix synthesis and mineralization. A strong angiogenic response without inflammation was detected on microscopic specimens of the BH combination compared with an inflammatory induced angiogenesis for the BS and BHS combinations. A multilayered organization of the BH complex grafted on CAM was detected with a differential expression of RUNX2, BMP4, and SPARC. The BH complex induced CAM mesenchymal cells differentiation through osteoblastic lineage with a sustained angiogenic response not related with inflammation. Thus, bone granules resuspended in hyaluronic acid seem to be the best combination for a proper non-inflammatory response in alveolar ridge augmentation. The CAM model allows us to assess the early events of the bone substitutes⁻mesenchymal cells interaction related to osteoblastic differentiation, an important step in alveolar ridge augmentation.