The culture method of laboratory diagnosis of tuberculosis

Utility of Xpert MTB/RIF Assay for Diagnosis of Pediatric Tuberculosis Under Programmatic Conditions in India

Tuberculosis (TB) diagnosis in children still remains a challenge in developing countries. We analyze the performance of Xpert MTB/RIF assay for the diagnosis of pediatric TB under programmatic conditions. We retrospectively analyzed the performance of Xpert MTB/RIF assay from February 2016 to March 2018. A total 2678 samples from TB suspects below 14 years were received in the laboratory and were frontline tested by Xpert MTB/RIF assay according to the manufacturer’s instructions. If sample was sufficient, the smear microscopy and culture were performed as per standard World Health Organization’s guidelines. The smears and cultures were performed in 2178 and 588 samples, respectively. Among 2678 samples, 68 were rejected, Xpert MTB/RIF assay was positive in 357/2610 (13.6%) cases, while the smear was positive in 81/2178 (3.3%) cases. The sensitivity of smear and Xpert MTB/RIF when compared with culture was 24.6% (14.1–37.8%) and 81% (68.6–90.1%), respectively. The diagnostic accuracy of Xpert MTB/RIF and smear was 97.1% and 92.2%, respectively. Thirty samples (8.5%) were detected as rifampicin resistance by Xpert MTB/RIF assay. The Xpert MTB/RIF increased the detection rate up to fourfold when compared with smear microscopy. Xpert MTB/RIF assay is the most rapid, sensitive, and specific method for microbiological confirmation and rifampicin resistance detection in pediatric tuberculosis.

Comparison of performances of loop-mediated isothermal amplification, XPERT MTB/RIF and BACTEC MGIT in the diagnosis of childhood tuberculosis

AIM

Key to the successful management of paediatric pulmonary tuberculosis (PTB) lies in the early detection and proper treatment. We evaluated the performances of modern diagnostic tests: loop-mediated isothermal amplification (LAMP-IS6110), Xpert MTB/RIF (Cepheid) and mycobacteria growth indicator tube (BACTEC MGIT 960 culture) against a modified version of international consensus diagnostic definition (i.e. composite reference standard (CRS)).

METHODS

A cross-sectional analytical study was conducted in a tertiary care hospital in North India from July 2016 to December 2017 involving 100 children <14 years with suspected PTB. Respiratory specimens (sputum, gastric lavage and/or bronchoalveolar lavage) were collected and subjected to LAMP-IS6110, Xpert MTB/RIF and BACTEC MGIT 960 culture assay.

RESULTS

Fifty-five children had confirmed and probable TB according to the CRS (prevalence = 58.5%). The sensitivity of BACTEC MGIT 960 culture, Xpert MTB/RIF and LAMP-IS6110 assay was 14%, 9.1% and 10.91%, respectively, when compared against the predefined CRS. The specificity for all these tests was 100%. When compared with BACTEC MGIT 960 culture as the gold standard, the LAMP-IS6110 assay and Xpert MTB/RIF assay had the sensitivity of 85.71% (95% CI: 42.13-99.64%) and 71.43% (95% CI: 29.04-96.33%), respectively. The specificity of both assays was 100%.

CONCLUSIONS

We noted that LAMP-IS6110 performed better than Xpert MTB/RIF (Cepheid) in terms of sensitivity when compared against BACTEC MGIT 960 culture as reference standard, though specificity of both the tests was comparable. The diagnostic performance of BACTEC MGIT 960 culture was better than LAMP-IS6110 and Xpert MTB/RIF in paediatric PTB, when compared against CRS.

Second-line Drug Resistance Characterization in Mycobacterium tuberculosis by Genotype MTBDRsl Assay

Tuberculosis (TB) remains a main hurdle for national programs due to increase in drug resistance to antitubercular drugs. World Health Organization (WHO)-endorsed Line Probe Assay, Genotype MTBDRsl Ver 2.0, gives opportunity for rapid diagnosis and molecular characterization of different mutations in drug targets of fluoroquinolone (FQ) and second-line injectable drugs (SLID). We, retrospectively, analyzed the data of Genotype MTBDRsl Ver 2.0 from January 2018 to June 2018. A total of 863 isolates of Mycobacterium tuberculosis, 687 rifampicin resistant and 176 isoniazid resistant only, were screened for drug resistance in FQ and SLID. All the isolates were tested for Genotype MTBDRsl Ver 2.0 according to the manufacturer’s instructions. The FQ and SLID resistance were detected in 295 (34.2%) and 70 (8.1%) isolates, respectively. Among newly diagnosed and follow-up rifampicin-resistant TB (RR TB) patients, the FQ resistance was 25.8% and 44.5%, respectively. The most common mutation (42.7%) in FQ-resistant isolates was MUT3C in gyrA gene. Both SLID and FQ resistance were detected in 59 (6.8%) RR TB isolates. The mono SLID resistance was detected in 12 (1.7%) isolates of RR TB. Genotype MTBDRsl Ver 2.0 assay is a rapid and important tool for the diagnosis and molecular characterization of second-line drug resistance under programmatic conditions.

Diagnostic accuracy of TB-LAMP assay in patients with pulmonary tuberculosis-a case-control study in northern India

SETTING

A tertiary care hospital in North India.

OBJECTIVE

Tuberculosis (TB) remains a major public health problem in developing countries. The diagnosis of tuberculosis is still challenging in primary care settings in endemic countries like India. WHO has endorsed loop mediated isothermal amplification assay (LAMP) for TB as a replacement for smear microscopy for peripheral settings, however, more data is required to establish the specificity of this modality for the diagnosis of TB. In this study we aim to determine the diagnostic accuracy of the TB-LAMP assay in pulmonary tuberculosis.

DESIGN

A total of 236 patients (117 cases suspected of TB and 119 patients with non-TB pulmonary disease) were enrolled between February to July, 2018. Microbiological workups consisting of mycobacterial smear microscopy, culture, Xpert MTB/Rif and TB-LAMP were performed.

RESULTS

From 236 samples, 18 (7.6%) were excluded from the study. TB-LAMP and Xpert MTB/RIF were positive in 46 (21.1%) and 49 (22.5%) of the samples, respectively. The sensitivity of Xpert MTB/RIF and TB-LAMP, when culture was taken as a reference standard, was 90% (95%CI: 78.2-96.7) and 82% (95%CI: 68.6-91.4), respectively. The specificity, positive predictive value (PPV), and negative predictive value (NPV) of TB-LAMP assay were 96.8% (95%CI: 92.8-98.9), 89.1% (95%CI: 77.4-95.2), and 94.4% (95%CI: 90.4-96.5), respectively.

CONCLUSION

The TB-LAMP assay showed a good specificity and sensitivity for detection ofM. tuberculosis in adults, however, for programmatic implementation, more studies are required to be conducted at peripheral level healthcare settings.

Two-stage revision arthroplasty for Mycobacterium Tuberculosis periprosthetic joint infection: An outcome analysis

BACKGROUND

Mycobacterium tuberculosis periprosthetic joint infection (TBPJI) is a rare complication of hip/knee joint arthroplasty. The outcomes of hip/knee TBPJI treatment are still unreported. The objective of this study was to investigate the outcomes of hip/knee TBPJI following treatment with two-stage exchange arthroplasty.

MATERIALS AND METHODS

From 2003 to 2013, 11 patients with TBPJI (six hips and five knees) were treated with two-stage exchange arthroplasty at our institution. We collected and analyzed variables including demographic data, comorbidities, microbiological data, duration of symptoms, and types of antibiotic used in bone cement.

RESULTS

At the most recent follow-up, the success rate of two-stage exchange arthroplasty was 63.3% (7 of 11). All five knee treatments resulted in infection eradication and successful prosthesis reimplantation. However, only two hip TBPJI treatments resulted in successful outcomes; two patients died and two experienced chronic infection. Overall, secondary bacterial infections were common in patients with TBPJI (5 of 11 cases, 45.5%). Streptomycin in bone cement increased the success rate (83.33% vs. 40%).

CONCLUSION

More than one third of the patients treated with two-stage exchange arthroplasty for TBPJI showed infection relapse or uncontrolled infection. Streptomycin-loaded interim cement spacers appeared to help ensure successful treatment. Routine M. tuberculosis culture is recommended when treating TBPJI in areas of high tuberculosis prevalence.

Evaluation of in-house loop-mediated isothermal amplification (LAMP) assay for rapid diagnosis of M. tuberculosis in pulmonary specimens

BACKGROUND

Loop-mediated isothermal amplification (LAMP) assay has come forward as a rapid, cost-effective molecular technique for diagnosis of tuberculosis (TB) in developing countries. This study evaluated Mycobacterium tuberculosis-specific in-house LAMP assay targeting 16s rRNA and compared it with other conventional tests and nucleic acid amplification assay (IS6110 PCR).

METHODS

A total of 133 sputum specimens (103 from suspected pulmonary TB cases and 30 from non-TB controls) were subjected to conventional tests, IS6110 PCR and 16s rRNA LAMP assay.

RESULTS

Of the 103 patients, the maximum number of cases were found to be positive by LAMP assay, that is, in 87 (84.5%) patients, followed by culture positive in 78 (75.7%), IS6110 PCR in 74 (71.8%), and smear positive in 70 (67.9%) patients. Of the 83 smear positive and/or culture positive cases, LAMP detected 77 (92.77%) cases, and was found to be superior to IS6110 PCR, which could detect 69 (83.1%) cases; a concordance of 0.6 was obtained between the two tests using kappa statistics.

CONCLUSION

Overall, LAMP was simple and efficacious for early diagnosis of smear positive, culture positive cases as well as for confirmation of smear negative, culture negative cases, and was found to be superior to IS6110 PCR.

Comparison of the efficacies of loop-mediated isothermal amplification, fluorescence smear microscopy and culture for the diagnosis of tuberculosis

BACKGROUND

Despite the advent of novel diagnostic techniques, smear microscopy remains as the most practical test available in resource-limited settings for tuberculosis (TB) diagnosis. Due to the low sensitivity of microscopy and the long time required for culture, feasible and accessible rapid diagnostic methods are urgently needed. Loop-mediated Isothermal Amplification (LAMP) is a promising nucleic-acid amplification assay, which could be accessible, cost-effective and more suited for use with unpurified samples.

METHODOLOGY/PRINCIPAL FINDINGS

In the current study, the objective was to assess the efficacy of a LAMP assay for tuberculosis compared with fluorescence smear microscopy as well as Löwenstein-Jensen (LJ) and Mycobacteria Growth Indicator Tube (MGIT) cultures for the diagnosis of pulmonary tuberculosis using sputum samples. Smear microscopy and culture were performed for decontaminated and concentrated sputum from TB suspects and the LAMP was also performed on these specimens. The LAMP and smear microscopy were compared, in series and in parallel, to culture. LAMP and smear microscopy showed sensitivities of 79.5% and 82.1% respectively and specificities of 93.8% and 96.9% respectively, compared to culture. LAMP and smear in series had sensitivity and specificity of 79.5% and 100.0% respectively. LAMP and smear in parallel had sensitivity and specificity of 82.1% and 90.6% respectively.

CONCLUSIONS/SIGNIFICANCE

The overall efficacies of LAMP and fluorescence smear microscopy in the current study were high and broadly similar. LAMP and smear in series had high specificity (100.0%) and can be used as a rule-in test combination. However, the performance of LAMP in smear negative samples was found to be insufficient.

Efficacy of loop mediated isothermal amplification (LAMP) assay for the laboratory identification of Mycobacterium tuberculosis isolates in a resource limited setting

Current methods of TB diagnosis are time consuming and less suited for developing countries. The LAMP (loop mediated isothermal amplification) is a rapid method more suitable for diagnosis in resource limited settings and has been proposed as a viable test requiring further evaluation for use as a laboratory method as well. We evaluated two LAMP assays, using culture lysates of clinical sputum samples (from Southern India) and compared it to a proprietary multiplex PCR reverse-hybridization line probe assay ('GenoType MTBC' from HAIN Lifescience GmbH, Germany). The LAMP procedure was modified to suit the local conditions. The Mycobacterium tuberculosis specific LAMP assay ('MTB LAMP') showed sensitivity and specificity, of 44.7% and 94.4% respectively in a 60 min format, 85.7% and 93.9% respectively in a 90 min format and 91.7%, and 90.9% respectively in a 120 min format. The Mycobacteria universal LAMP assay ('Muniv LAMP') showed a sensitivity of 99.1%. The LAMP was shown to be a rapid and accessible assay for the laboratory identification of M. tuberculosis isolates. Initial denaturation of template was shown to be essential for amplification in unpurified/dilute samples and longer incubation was shown to increase the sensitivity. The need for modification of protocols to yield better efficacy in this scenario needs to be addressed in subsequent studies.